KRUPS BW500 1.8 Quart Electric Kettle

1. Important Safety Instructions

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:

• Read all instructions before using the kettle.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against fire, electric shock, and injury to persons, do not immerse cord, plugs, or kettle in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment.
• The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to 'off', then remove plug from wall outlet.
• Do not use appliance for other than intended use.
• Scalding may occur if the lid is removed during the heating cycle.
• Ensure the lid is securely closed before operating.
• This appliance is for household use only.

2. Product Overview

The KRUPS BW500 Electric Kettle is designed for rapid water heating with a 1.8-quart capacity. It features a brushed stainless steel body and a 360-degree rotational base for cordless operation.

Figure 1: Front view of the KRUPS BW500 Electric Kettle.

Figure 2: Components of the KRUPS BW500 Electric Kettle, including the kettle body, power base, and removable lid.

Figure 3: Water level indicators on the side of the KRUPS BW500 Electric Kettle, showing measurements in ounces and cups.

3. Setup and First Use

3.1 Unpacking

Carefully remove all packaging materials from the kettle and its components. Retain packaging for future storage or transport if needed.

3.2 Initial Cleaning

1. Before first use, fill the kettle with cold water up to the maximum fill line.
2. Boil the water.
3. Discard the boiled water.
4. Repeat this process two to three times to remove any manufacturing residues and ensure optimal taste.

3.3 Placement

Place the power base on a flat, stable, heat-resistant surface. Ensure the power cord is not dangling where it can be pulled or tripped over.

4. Operating Instructions

4.1 Filling the Kettle

1. Remove the kettle from its power base.
2. Press the lid release button or lift the lid to open.
3. Fill the kettle with the desired amount of cold water. Do not fill below the minimum mark or above the maximum (1.8 quarts / 57 oz) mark. Overfilling may cause boiling water to spill out.
4. Close the lid securely.

Figure 4: A hand demonstrating how to open the lid of the KRUPS BW500 Electric Kettle.

4.2 Boiling Water

1. Place the filled kettle onto its 360-degree rotational power base. Ensure it is seated correctly.
2. Plug the power base into a standard electrical outlet.
3. Press the On/Off switch located on the handle. The indicator light will illuminate, signaling that the kettle is heating.
4. The kettle will automatically shut off once the water reaches a boil. The indicator light will turn off.
5. You can remove the kettle from the base at any time during the boiling process.

Figure 5: The KRUPS BW500 Electric Kettle placed on its 360-degree rotational power base.

4.3 Pouring

Carefully lift the kettle from the base and pour the hot water. Be mindful of steam and the hot exterior of the kettle. The spout is designed for drip-free pouring.

5. Maintenance and Cleaning

Regular cleaning and maintenance will prolong the life of your kettle and ensure optimal performance.

5.1 Exterior Cleaning

1. Unplug the kettle and allow it to cool completely before cleaning.
2. Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or scouring pads, as these can damage the brushed stainless steel finish.
3. Ensure no water enters the electrical components.

5.2 Interior Cleaning and Descaling

Mineral deposits (limescale) can build up inside the kettle over time, especially in hard water areas. Descaling is recommended periodically.

1. Fill the kettle with a mixture of one part white vinegar and two parts water.
2. Bring the mixture to a boil and then let it stand for at least 30 minutes, or longer for heavy scale.
3. Empty the kettle and rinse thoroughly with fresh water several times.
4. If necessary, repeat the process or use a commercial descaling solution following its instructions.

5.3 Anti-Scale Filter Cleaning

The kettle is equipped with an anti-scale filter near the spout to prevent limescale particles from being poured into your cup.

1. Ensure the kettle is cool and unplugged.
2. Open the lid and carefully remove the anti-scale filter.
3. Rinse the filter under running water and gently brush away any deposits.
4. Reinsert the filter securely into its position.

Figure 6: A hand removing the anti-scale filter from the spout of the KRUPS BW500 Electric Kettle.

6. Troubleshooting

If you encounter issues with your KRUPS BW500 Electric Kettle, please refer to the following common problems and solutions:

• Kettle does not heat:
  • Ensure the power base is securely plugged into a working electrical outlet.
  • Verify that the kettle is correctly seated on the power base.
  • Check if the On/Off switch is pressed and the indicator light is on.
• Water has an unusual taste:
  • Perform the initial cleaning steps (boiling and discarding water) multiple times.
  • Descale the kettle if mineral deposits are present.
• Kettle leaks water:
  • Ensure the lid is closed properly and securely.
  • Do not overfill the kettle beyond the maximum fill line.
  • Check for any visible damage or cracks. If damage is present, discontinue use and contact customer support.
• Kettle automatically shuts off too soon or not at all:
  • Ensure the kettle is filled with at least the minimum amount of water.
  • If the issue persists, the automatic shut-off mechanism may require servicing.

If these steps do not resolve the issue, please contact KRUPS customer support for further assistance.

7. Specifications

8. Warranty Information

The KRUPS BW500 Electric Kettle comes with a 2-year worldwide limited warranty. This warranty covers defects in materials and workmanship under normal use.

For specific terms, conditions, and to make a warranty claim, please refer to the warranty card included with your product or contact KRUPS customer support directly.

9. Customer Support

For any questions, assistance, or service inquiries regarding your KRUPS BW500 Electric Kettle, please contact KRUPS customer support.

You can find contact information on the official KRUPS website or through the documentation provided with your product.

Visit the KRUPS Store on Amazon for more information and products.