1. Introduction
Welcome to the instruction manual for your Polk Audio Atrium 5 Outdoor Speakers. These speakers are designed to deliver high-quality audio in various outdoor environments, featuring all-weather durability and a robust design. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of your speakers.
Product Overview
The Atrium 5 speakers are engineered for powerful bass and broad sound coverage, making them suitable for patios, poolsides, or any outdoor living space. They are All-Weather Certified, built to withstand elements such as salt-fog, UV exposure, extreme temperatures, and heavy rains. Key features include Polk's patented Dynamic Balance technology with a 5-inch driver and 0.75-inch tweeter, and Power Port Technology for deep, extended bass. The Speed-Lock mounting system ensures easy and secure installation.
Figure 1.1: Polk Audio Atrium 5 speakers, highlighting their All-Weather Certified construction for outdoor use.
2. What's in the Box
Package Contents
Your Polk Audio Atrium 5 speaker package includes the following items:
- 2 White all-weather speakers
- 2 Mounting brackets (pre-installed)
- Owner's Manual
- Online Product Registration card
Figure 2.1: A pair of Polk Audio Atrium 5 speakers, showcasing their design and included mounting brackets.
3. Setup
Mounting the Speakers
The Atrium 5 speakers feature a one-click Speed-Lock mounting bracket for easy installation. You can mount these speakers vertically or horizontally. First, securely mount the C-bracket to your desired surface. Then, adjust the speaker's angle and fasten it with a click into the bracket.
Figure 3.1: An Atrium 5 speaker mounted using the Speed-Lock system, demonstrating vertical or horizontal placement options.
Wiring Connections
The Atrium 5 speakers are wired for auxiliary connectivity. Connect the speaker wires from your amplifier to the binding posts on the back of each speaker. Ensure correct polarity (positive to positive, negative to negative) for optimal sound performance. The speakers have an impedance of 8 Ohm.
Figure 3.2: Rear view of the Polk Audio Atrium 5 speaker, showing the binding posts for wired connections.
Product Overview Video
Video 3.1: An official product overview video from Amazon Product Imaging, providing a visual introduction to the Polk Audio Atrium 5 speakers and their features.
4. Operating
Audio Source Connection
Connect your audio source (e.g., amplifier, receiver) to the speakers using appropriate speaker wire. The speakers are designed for a corded electric power source. Ensure all connections are secure before powering on your audio system.
Sound Adjustment
The Polk Audio Atrium 5 speakers have a maximum output power of 100 Watts and a frequency response of 12 KHz. Adjust the volume and tone settings on your connected amplifier or audio source to achieve your desired sound. If your system includes a remote control, use it to manage playback and volume.
Figure 4.1: Close-up of a Polk Audio Atrium 5 speaker, highlighting the patented Dynamic Balance drivers for clear sound.
5. Maintenance
All-Weather Durability
The Atrium 5 speakers are built with marine-grade waterproof construction and UV protection. To clean, use a soft cloth with mild soap and water. Avoid harsh chemicals or abrasive cleaners that could damage the finish or components. The speakers are water resistant, but direct high-pressure water jets should be avoided.
Grille and Hardware
The aluminum grilles and stainless steel/brass hardware are designed to resist rust. Periodically inspect the mounting hardware for any signs of wear or loosening and tighten as necessary to ensure the speakers remain securely in place.
6. Troubleshooting
Common Issues
- No Sound: Verify that the speaker wires are securely connected to both the speakers and the amplifier. Ensure the amplifier is powered on and the correct input source is selected. Check the power source for the amplifier.
- Distorted Sound: Reduce the volume on your amplifier and audio source. Ensure the speaker wires are not frayed or short-circuiting. Confirm that the amplifier's output power is compatible with the speakers' maximum input power.
- Intermittent Sound: Check all wired connections for looseness or corrosion. Ensure the speaker wire is not damaged.
7. Specifications
Technical Details
| Feature | Detail |
|---|---|
| Model Name | Atrium 5 |
| Speaker Type | Outdoor |
| Mounting Type | Wall Mount |
| Material | Polypropylene |
| Color | White |
| Product Dimensions | 6.8"D x 7.8"W x 10.3"H |
| Item Weight | 4.6 Pounds |
| Impedance | 8 Ohm |
| Is Waterproof | TRUE (Water Resistant) |
| Speaker Maximum Output Power | 100 Watts |
| Frequency Response | 12 KHz |
| Connectivity Technology | Auxiliary (Wired) |
| Audio Driver Size | 5 Inches (Woofer), 0.75 Inches (Tweeter) |
| Number of Items | 2 |
8. Warranty and Support
Warranty Information
The Polk Audio Atrium 5 speakers come with a Limited Warranty. Please refer to the Online Product Registration card included in your package or visit the official Polk Audio website for detailed warranty terms and conditions.
Customer Support
For further assistance, technical support, or inquiries regarding your Polk Audio Atrium 5 speakers, please visit the official Polk Audio website or contact their customer service department. Contact details can typically be found on the product packaging or the official website.
