1. Introduction
The TiVo AN0100 Wireless N Network Adapter is designed to establish a high-performance, 802.11n wireless connection between your TiVo DVR and your home internet network. This enables faster downloads of high-definition movies and television shows, enhancing your entertainment experience. The adapter features a straightforward setup process to facilitate quick integration into your existing network.
Figure 1: TiVo AN0100 Wireless N Network Adapter
2. Key Features
- Enhanced Download Speeds: Facilitates quicker downloads of HD movies and TV shows to your TiVo DVR.
- Efficient Multi-Room Viewing: Allows for faster transfer of recordings between TiVo DVRs.
- Accelerated TiVoToGo Transfers: Speeds up the process of loading shows onto portable devices and transferring them to your computer.
- Rapid Video-On-Demand (VOD) Access: Provides faster, more reliable, and efficient performance for streaming movies, web videos, and music.
3. Package Contents
The TiVo AN0100 Wireless N Network Adapter package typically includes:
- TiVo AN0100 Wireless N Network Adapter
- Ethernet Cable
- Power Adapter (integrated or separate, depending on model revision)
- Quick Start Guide (not included in this manual)
4. Setup Instructions
Setting up your TiVo AN0100 Wireless N Network Adapter involves connecting it to your TiVo DVR and configuring its network settings. There are generally two methods for configuration: using the WPS button or a web-based interface.
4.1 Physical Connection
- Power On: Plug the TiVo AN0100 Wireless N Network Adapter into an electrical outlet. Ensure it powers on, indicated by a status light.
- Connect to DVR: Connect one end of the provided Ethernet cable to the Ethernet port on the TiVo AN0100 adapter and the other end to the Ethernet port on your TiVo DVR.
4.2 Network Configuration (Method 1: WPS)
If your wireless router supports Wi-Fi Protected Setup (WPS), you can use this method for a quick setup.
- Ensure your TiVo AN0100 adapter is powered on and connected to your TiVo DVR.
- Press the WPS button on your wireless router. The WPS indicator light on your router should begin to blink.
- Within two minutes, press the WPS button on your TiVo AN0100 adapter. The WPS indicator light on the adapter should also begin to blink.
- Wait for the WPS lights on both devices to turn solid, indicating a successful connection.
4.3 Network Configuration (Method 2: Web Interface)
If your router does not have a WPS button or if you prefer manual configuration, use the web-based interface.
- Connect the TiVo AN0100 adapter to a computer using an Ethernet cable. Ensure the adapter is powered on.
- Open a web browser on the connected computer and navigate to the adapter's default IP address (often 192.168.10.1, refer to the adapter's label or quick start guide for exact address).
- Follow the on-screen prompts to configure the adapter. You will typically need to select your home wireless network (SSID) and enter its password (WPA/WPA2 encryption is supported).
- Once configured, disconnect the adapter from the computer and reconnect it to your TiVo DVR as described in Section 4.1.
5. Operating Your TiVo AN0100 Adapter
Once successfully set up, your TiVo AN0100 adapter will seamlessly integrate with your TiVo DVR to provide wireless network connectivity. Your TiVo DVR will recognize the adapter as a wired connection, allowing it to access the internet and other network features.
- Access Online Content: Enjoy streaming services, video-on-demand, and other internet-based features directly on your TiVo DVR.
- Multi-Room Streaming: Transfer and watch recordings from one TiVo DVR to another within your home network.
- TiVoToGo: Utilize the faster network speeds for quicker transfers of recorded shows to compatible portable devices or computers.
6. Care and Maintenance
To ensure optimal performance and longevity of your TiVo AN0100 Wireless N Network Adapter, follow these guidelines:
- Cleaning: Use a soft, dry cloth to clean the exterior of the adapter. Do not use liquid cleaners or aerosols.
- Placement: Place the adapter in a well-ventilated area, away from direct sunlight, heat sources, and excessive moisture. Avoid placing it near large metal objects or other electronic devices that may cause interference.
- Power Cycle: If the adapter experiences issues, try unplugging it from the power outlet for 10-15 seconds and then plugging it back in.
7. Troubleshooting
If you encounter problems with your TiVo AN0100 adapter, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No network connection / Adapter lights are off | No power or loose connection. | Ensure the adapter is securely plugged into a working electrical outlet. Check the Ethernet cable connection to the DVR. |
| Slow network speeds or intermittent connection | Interference, distance from router, or incorrect network settings. |
|
| WPS setup fails | WPS timeout or router incompatibility. |
|
8. Specifications
| Feature | Detail |
|---|---|
| Brand | TiVo |
| Model Number | AN0100 |
| Hardware Interface | Ethernet |
| Color | Gray |
| Compatible Devices | Set-top Box (TiVo DVRs) |
| Data Link Protocol | Fast Ethernet |
| Item Weight | 3.52 ounces |
| UPC | 851342000841 |
| Compatible OS Family | Windows (for web interface setup if needed) |
9. Warranty Information
The TiVo AN0100 Wireless N Network Adapter comes with a 90-day parts and labor warranty from the date of purchase. Please retain your proof of purchase for warranty claims. This warranty covers defects in materials and workmanship under normal use.
10. Customer Support
For technical assistance, troubleshooting, or warranty inquiries, please visit the official TiVo support website or contact their customer service. You can find more information and contact details on the TiVo website.
