Hudson Valley Lighting 1868-AN

Hudson Valley Lighting 1868-AN Six Light Island Chandelier User Manual

Model: 1868-AN | Brand: Hudson Valley Lighting

Product Overview

The Hudson Valley Lighting 1868-AN Six Light Island Chandelier features slender arms blossoming into rose-shaped silhouettes. Botanically inspired bobeches reveal the candle cup's flowering figure. This fixture highlights the metal's warm characteristics with its antique nickel finish and obsidian shades. It is designed to provide elegant illumination for various spaces, particularly suitable for island lighting.

Image: The Hudson Valley Lighting 1868-AN Six Light Island Chandelier, showcasing its antique nickel finish, six black shades, and elegant design suitable for island illumination.

Setup and Installation

Professional installation is recommended for this lighting fixture. Ensure power is disconnected at the circuit breaker before beginning installation.

Safety First: Turn off power at the main circuit breaker. Verify power is off using a voltage tester.
Unpack Components: Carefully remove all parts from the packaging. Inspect for any damage. Keep all packing materials until installation is complete and satisfactory.
Mounting Bracket Installation: Secure the mounting bracket to the junction box in the ceiling. Ensure it is firmly attached and can support the weight of the fixture.
Wiring: Connect the fixture's wires to the corresponding house wires (black to black, white to white, ground to ground). Use appropriate wire connectors and ensure all connections are secure.
Fixture Assembly: Assemble the chandelier body, attaching arms and shades as per the included diagram. Ensure all connections are tight.
Canopy Attachment: Carefully lift the fixture and attach the canopy to the mounting bracket, securing it with the provided screws or nuts.
Bulb Installation: Install the recommended incandescent bulbs (60 watts, 120 volts) into each socket. Do not exceed the maximum wattage.
Power Restoration: Once installation is complete and all connections are secure, restore power at the circuit breaker.

For detailed diagrams and specific hardware instructions, refer to the separate installation guide provided with your product packaging.

Operating Instructions

The Hudson Valley Lighting 1868-AN Chandelier operates like any standard hardwired lighting fixture.

Turning On/Off: Use the wall switch connected to the fixture to turn the chandelier on or off.
Dimming (Optional): If connected to a compatible dimmer switch, you can adjust the light intensity by manipulating the dimmer control. Ensure that the bulbs installed are dimmable.

Maintenance

Regular maintenance will help preserve the appearance and functionality of your chandelier.

Cleaning:
- Before cleaning, ensure the fixture is turned off and cool to the touch.
- Wipe the metal surfaces with a soft, dry cloth. Do not use abrasive cleaners, polishes, or solvents as they may damage the finish.
- For shades, gently dust with a soft brush or cloth.
Bulb Replacement:
- Turn off power to the fixture at the circuit breaker and allow bulbs to cool.
- Carefully unscrew the old bulb.
- Screw in a new incandescent bulb of the same type and wattage (max 60 watts).
- Restore power.

Troubleshooting

Problem	Possible Cause	Solution
Light does not turn on.	No power to the fixture. Loose wire connection. Faulty bulb. Faulty wall switch.	Check circuit breaker and ensure it is ON. Verify all wire connections are secure (ensure power is OFF before checking). Replace bulb with a new, working one. Test wall switch or consult an electrician.
Light flickers.	Loose bulb. Incorrect bulb type for dimmer. Loose wire connection.	Tighten bulb. Ensure bulbs are dimmable if using a dimmer. Check wire connections (ensure power is OFF before checking).
Fixture hums.	Incompatible dimmer switch. Loose wiring.	Replace dimmer with one compatible with incandescent loads. Check wire connections (ensure power is OFF before checking).

If problems persist, contact a qualified electrician or Hudson Valley Lighting customer support.

Specifications

Brand	Hudson Valley Lighting
Model Name	1868-AN
Finish	Antique Nickel
Material	Metal (Fixture), Glass (Shades)
Light Fixture Form	Chandelier
Number of Light Sources	6
Wattage	60 watts (per bulb)
Voltage	120 Volts
Item Weight	15 Pounds
Product Dimensions	20 x 39 x 28.5 inches
UL Listed	Yes
UPC	806134105273

Warranty Information

The product specifications indicate a manufacturer warranty, however, the warranty description states "None." Please refer to your purchase documentation or contact Hudson Valley Lighting directly for the most accurate and up-to-date warranty information.

Note: Any modifications to the product or improper installation may void the warranty.

Customer Support

For further assistance, technical support, or to inquire about replacement parts, please contact Hudson Valley Lighting customer service.

Brand Website: Visit Hudson Valley Lighting Store on Amazon
Refer to the contact information provided in your product packaging for direct support numbers or email addresses.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.