Introduction
Thank you for purchasing the Hudson Valley Lighting 1868-PN Six Light Island Chandelier. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The Jasper collection features slender arms that blossom into rose-shaped silhouettes, with botanically inspired bobeches revealing the candle cup's flowering figure. This particular model boasts a polished nickel finish, highlighting the metal's warm characteristics, and is complemented by black shades.
Important Safety Information
- WARNING: This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
- Always disconnect power at the main fuse or circuit breaker box before beginning installation or performing any maintenance.
- All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician.
- This fixture is designed for 120 Volts AC supply.
- Ensure the mounting surface can support the weight of the fixture.
- This product is for indoor use only.
- Please check your local laws and building codes before purchasing and installing this product.
Package Contents and Components
Carefully unpack your fixture and identify all parts. Keep all packaging materials until installation is complete to prevent accidental disposal of small parts.
- 1 x 1868-PN Chandelier Fixture (Polished Nickel finish with black and silver foil lining parchment shades)
- 54 inches of chain for adjustable hanging height
- Mounting hardware (typically includes mounting plate, screws, wire nuts)
Note: Six E12 candelabra base bulbs (max 60 watts each) are required and sold separately.
Installation Instructions
Professional installation by a qualified electrician is highly recommended for this fixture to ensure safety and proper functionality.
- Prepare for Installation: Turn off the electricity at the main fuse box or circuit breaker. Ensure the power is off before proceeding.
- Mounting Bracket Installation: Secure the mounting bracket to the junction box in the ceiling. Ensure it is firmly attached and can support the fixture's weight (approximately 23 pounds). This fixture uses a protruding mounting type.
- Adjusting Hanging Height: Determine the desired hanging height for your chandelier. Use the provided 54 inches of chain to adjust the length. You may need to remove links to achieve the correct height.
- Wiring Connections: Carefully connect the fixture's wires to the corresponding wires from the junction box. Typically, black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground). Use appropriate wire nuts and ensure all connections are secure.
- Secure Fixture: Carefully lift the fixture and secure it to the mounting bracket, ensuring all wires are tucked safely inside the junction box.
- Install Bulbs: Screw six E12 candelabra base bulbs (max 60 watts each, sold separately) into the sockets. Do not overtighten.
- Restore Power: Once installation is complete and all connections are secure, restore power at the main fuse box or circuit breaker.
Figure 1: Hudson Valley Lighting 1868-PN Island Chandelier. This image displays the chandelier with its polished nickel finish and six black, conical shades, suspended from a rectangular ceiling plate by two chains. This fixture is designed for island lighting applications.
Operating Instructions
The Hudson Valley Lighting 1868-PN Chandelier operates as a standard hardwired lighting fixture. Once properly installed and wired to a wall switch or dimmer (not included), you can control the light output.
- Turning On/Off: Use the wall switch connected to the fixture to turn the chandelier on or off.
- Light Source: This fixture is designed for incandescent light sources. Ensure you use E12 candelabra base bulbs with a maximum wattage of 60W per bulb.
- Lighting Method: The fixture provides an Up/Down Light effect, illuminating both upwards and downwards from the shades.
Care and Maintenance
Regular cleaning will help maintain the appearance and longevity of your chandelier.
- Cleaning the Fixture: Always turn off the power and allow the fixture to cool before cleaning. Use a soft, dry cloth to wipe down the polished nickel finish. Avoid abrasive cleaners, solvents, or polishes as they may damage the finish.
- Cleaning the Shades: The black parchment shades can be gently dusted with a soft, dry cloth or a feather duster. Do not use wet cloths or liquid cleaners on the shades.
- Bulb Replacement: Ensure the power is off and bulbs are cool before replacing. Use only E12 candelabra base bulbs, not exceeding 60 watts per bulb.
- Periodic Inspection: Periodically check all connections and mounting hardware to ensure they remain secure.
Troubleshooting
If your chandelier is not functioning correctly, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to fixture Loose wiring connection Faulty bulb | Check circuit breaker/fuse. Ensure all wire connections are secure (power off first). Replace bulb(s). |
| Flickering light | Loose bulb Incorrect dimmer switch Loose wiring | Tighten bulb(s). Ensure dimmer is compatible with incandescent bulbs. Check wiring connections (power off first). |
| Fixture hums | Incompatible dimmer Loose components | Replace dimmer with one designed for incandescent loads. Ensure all parts are securely fastened. |
If the problem persists after attempting these solutions, please contact a qualified electrician or Hudson Valley Lighting customer support.
Product Specifications
| Attribute | Detail |
|---|---|
| Brand | Hudson Valley Lighting |
| Model Name/Number | 1868-PN |
| Fixture Type | Island Chandelier |
| Color/Finish | Polished Nickel |
| Material | Metal, Glass (Shade Material) |
| Style | Traditional |
| Product Dimensions | 20 x 39 x 28.5 inches (Depth x Width x Height) |
| Item Weight | 23 pounds |
| Number of Lights | 6 |
| Bulb Base | E12 Candelabra |
| Max Wattage per Bulb | 60 Watts (Incandescent) |
| Voltage | 120 Volts |
| Power Source | Corded Electric |
| Included Components | 1868-PN fixture, 54 in. chain |
| Mounting Type | Protruding |
| Shade Color | Black (with silver foil lining) |
| Certification | UL Listed |
| Special Features | Energy Star Lighting |
| UPC | 806134105297 |
Warranty Information
This product is covered by a manufacturer's warranty. Specific details regarding the terms and duration of the warranty are not provided within this document. Please refer to the official documentation included with your purchase or visit the Hudson Valley Lighting website for comprehensive warranty information.
Customer Support
For technical assistance, replacement parts, or further inquiries regarding your Hudson Valley Lighting 1868-PN Chandelier, please contact Hudson Valley Lighting customer service directly.
You can often find support contact information, FAQs, and additional resources on the official Hudson Valley Lighting website:
