Product Overview
The Rev-A-Shelf 4WUT-1 Wood Utility Tray Insert is designed to organize kitchen drawers efficiently. Crafted from maple hardwood with a UV-cured clear finish, this insert provides a durable and stylish solution for storing flatware, utensils, and other kitchen tools. It is designed for drop-in installation and can be trimmed to fit various drawer sizes, offering a customized organizational solution.
Key Features:
- Wood Utility Tray Insert
- Trimmable to Various Drawer Sizes
- Maple UV Clear Finish
- Limited lifetime warranty
Image: The Rev-A-Shelf 4WUT-1 Wood Utility Tray Insert shown installed in a kitchen drawer, neatly organizing a variety of kitchen utensils such as spatulas, ladles, whisks, knives, and measuring spoons. The insert features multiple compartments to separate different types of items.
Setup and Installation
The Rev-A-Shelf 4WUT-1 is designed for a customized drop-in installation, allowing it to fit a wide range of kitchen drawer dimensions. Follow these steps for proper setup:
- Measure Your Drawer: Carefully measure the interior width and depth of your kitchen drawer where the insert will be placed. Ensure to measure at multiple points to account for any slight variations.
- Compare with Insert Dimensions: The insert's physical dimensions are 18-1/2" W x 22" D x 2-7/8" H.
- Trimming for Fit: If your drawer is smaller than the insert, the tray can be trimmed to achieve a precise fit. The minimum trim size for this model is 8-1/8" W and 17" D. Use appropriate woodworking tools for accurate and clean cuts. It is recommended to mark the cut lines precisely before trimming.
- Drop-in Placement: Once trimmed to the correct size, simply place the utility tray insert into your drawer. No fasteners or adhesives are typically required for installation, as the custom fit will hold it securely in place.
- Organize Utensils: Begin organizing your flatware, cutlery, and other kitchen utensils into the designated compartments of the tray.
Note: For best results, ensure cuts are straight and smooth to prevent damage to the drawer or the insert itself. If unsure about trimming, consult a professional.
Operating Instructions
Using the Rev-A-Shelf Wood Utility Tray Insert is straightforward. Its primary function is to provide organized storage for kitchen utensils and flatware, making items easily accessible and preventing clutter within your drawers.
- Categorize Items: Utilize the various compartments to separate different types of utensils, such as forks, spoons, knives, spatulas, whisks, and other cooking tools.
- Easy Access: The open design of the compartments allows for quick identification and retrieval of needed items.
- Maintain Order: Regularly return items to their designated slots after use and cleaning to maintain the organized state of your drawer.
Maintenance and Care
To ensure the longevity and appearance of your Rev-A-Shelf Wood Utility Tray Insert, follow these maintenance guidelines:
- Cleaning: Wipe the insert with a damp cloth and mild soap as needed. Avoid abrasive cleaners or harsh chemicals, as these can damage the UV-cured clear finish.
- Drying: After cleaning, dry the insert thoroughly with a clean, soft cloth to prevent water spots or warping of the wood.
- Spills: Promptly clean up any spills, especially liquids, to prevent staining or damage to the wood.
- Avoid Excessive Moisture: Do not submerge the insert in water or place it in a dishwasher. Exposure to excessive moisture can cause the wood to swell, crack, or warp.
Troubleshooting
While the Rev-A-Shelf Wood Utility Tray Insert is a simple product, here are some common considerations and their solutions:
- Insert Does Not Fit:
- Too Large: The insert is designed to be trimmable. Re-measure your drawer and carefully trim the insert to the correct dimensions, ensuring it does not exceed the minimum trim size.
- Too Small: If the insert is too small for your drawer after trimming, it may slide around. Consider adding non-slip pads to the bottom corners of the insert or placing a non-slip liner in the drawer to secure it.
- Utensils Do Not Fit in Compartments:
- Some oversized utensils may not fit perfectly. Arrange larger items in wider compartments or consider storing them separately if they consistently cause issues.
- Wood Appears Dull or Damaged:
- The UV-cured clear finish provides protection. If the finish appears dull, ensure you are cleaning it with mild, non-abrasive cleaners. For minor scratches, wood furniture polish designed for finished wood surfaces may help.
Specifications
| Attribute | Detail |
|---|---|
| Product Dimensions (Overall) | 22 x 19 x 3 inches |
| Insert Dimensions (Physical) | 18-1/2" W x 22" D x 2-7/8" H |
| Item Weight | 5 pounds |
| Minimum Trim Size | 8-1/8" W and 17" D |
| Material | Maple Hardwood |
| Finish | UV-cured Clear Finish |
| Model Number | 4WUT-1 |
| Manufacturer | Rev-A-Shelf |
Warranty and Support
The Rev-A-Shelf 4WUT-1 Wood Utility Tray Insert comes with a Limited Lifetime Warranty. This warranty covers defects in material and workmanship under normal use and service.
For warranty claims, product support, or further inquiries, please contact Rev-A-Shelf customer service directly. Refer to the official Rev-A-Shelf website or product packaging for the most current contact information.
Manufacturer: Rev-A-Shelf
Website: www.rev-a-shelf.com
