Stack-On GCB-14P Steel 14-Gun Security Cabinet User Manual

Introduction

The Stack-On GCB-14P 14-Gun Steel Security Cabinet is a California approved firearms safety device designed to meet the requirements of California Penal Code Section 12088. This robust steel cabinet features a 3-point locking system with a key-coded, double-bitted lock for enhanced security. It is designed to store up to 14 rifles or shotguns, accommodating firearms up to 54 inches tall. The cabinet includes a removable shelf positioned at the front, allowing for the storage of longer guns along the back wall. A foam-padded bottom is included to protect firearms from scratches. This cabinet is an ideal storage solution for hunters, outdoorsmen, and sports enthusiasts.

Manufactured with welded, steel box construction, Stack-On Gun Cabinets feature a superior all-steel 3-point locking system. A full-length welded and staked steel piano hinge further enhances security. The cabinet incorporates Stack-On's patented, contoured non-marring barrel rests and barrel standoffs, specifically designed for scoped guns. It boasts a durable baked epoxy finish in hunter green and a flush mount bottom for easy fastening to the floor. Pre-drilled mounting holes facilitate secure attachment to the floor or wall, with all necessary fastening and finishing hardware included. Top mounting holes are pre-drilled to align with Stack-On's Pistol/Ammo Cabinets for integrated storage solutions. The locking plate engages behind the steel cabinet frame at the top and bottom, with an additional large steel locking plate securing the door panel's center section. Molded barrel rests are designed for longevity and will not deteriorate or compress, accommodating both rifles and side-by-side shotguns. The unique barrel rest standoffs keep most scoped rifles away from the cabinet's back, allowing for single-position storage, and can be removed if storage needs change.

Setup and Installation

Proper installation of your Stack-On GCB-14P Security Cabinet is crucial for maximum security and stability.

Unpacking and Inspection

Carefully remove the cabinet from its packaging.
Inspect the cabinet for any signs of damage that may have occurred during shipping.
Locate the keys and any included hardware for mounting.

Choosing a Location

Select a suitable location for your cabinet. Consider areas such as a garage or home office. Ensure the chosen location allows for easy access while maintaining discretion.

Securing the Cabinet

It is essential to secure the cabinet to a wall or floor to prevent tipping and unauthorized removal.

The cabinet features a flush mount bottom and pre-drilled mounting holes for easy attachment to the floor or wall.
Use the provided fastening and finishing hardware to securely anchor the cabinet.
Pre-drilled top mounting holes are designed to align with Stack-On Pistol/Ammo Cabinets for stacking, if applicable.
Important Safety Note: Always secure the cabinet to the wall using the provided hardware to prevent tipping. Do not move the cabinet once installed.

Stack-On GCB-14P Steel 14-Gun Security Cabinet, Black

Image: The Stack-On GCB-14P Steel 14-Gun Security Cabinet. This image shows the full black cabinet with its elegant silver accents around the door. The cabinet is designed for secure storage of firearms.

Operating Instructions

Locking and Unlocking

The cabinet is equipped with a 3-point locking system and a key-coded, double-bitted lock.

To unlock, insert the key into the lock and turn it to disengage the locking mechanism.
To lock, close the door firmly and turn the key to engage the 3-point locking system. Ensure the door is fully secured.
Always keep spare keys in a secure location away from the cabinet.

Storing Firearms

The cabinet is designed to hold up to 14 rifles or shotguns, with a maximum height of 54 inches.

Utilize the patented, contoured non-marring barrel rests to securely position your firearms.
For scoped guns, use the included barrel standoffs to keep them away from the back of the cabinet, allowing for single-position storage. These standoffs can be attached to any barrel rest and removed as needed.
The foam-padded bottom helps prevent scratches to your firearms.

Using the Removable Shelf

A removable shelf is included to provide additional storage space.

The shelf is positioned in the front of the cabinet. This design allows for longer guns to be stored along the back wall, maximizing vertical storage space.
The shelf is ideal for storing handguns, ammunition, optics, or other valuables.

Maintenance

To ensure the longevity and proper function of your Stack-On Security Cabinet, follow these simple maintenance guidelines:

Cleaning: Wipe the exterior of the cabinet with a soft, damp cloth. Avoid abrasive cleaners that could damage the baked epoxy finish.
Lock Mechanism: Periodically check the lock for smooth operation. If the lock feels stiff, a small amount of graphite lubricant can be applied to the keyhole. Do not use oil-based lubricants.
Hinges: The full-length welded steel piano hinge is designed for durability. No regular lubrication is typically required.
Internal Components: Ensure barrel rests and the removable shelf are clean and free of debris.

Troubleshooting

If you encounter any issues with your Stack-On Security Cabinet, please refer to the following common troubleshooting tips:

Door Not Closing Properly:
- Check for any obstructions inside the cabinet or along the door frame that might prevent it from closing fully.
- Ensure the cabinet is level and securely mounted. Uneven installation can sometimes affect door alignment.
Key Difficult to Turn or Lock Not Engaging:
- Ensure the key is fully inserted into the lock.
- Apply a small amount of graphite lubricant to the keyhole if the mechanism feels stiff.
- Verify that the door is completely closed and aligned before attempting to lock. The 3-point locking system requires proper alignment to engage.
Cabinet Tipping or Instability:
- This indicates the cabinet is not properly secured. Re-check all mounting points and ensure the cabinet is firmly anchored to the wall or floor using the provided hardware.
- Ensure the mounting surface is sturdy and capable of supporting the cabinet's weight and contents.

If these steps do not resolve the issue, please contact customer support for further assistance.

Product Specifications

Feature	Detail
Brand	Stack-On
Model Number	GCB-14P-DS
Color	Black
Product Dimensions (D x W x H)	17"D x 21.5"W x 58"H
Mounting Type	Floor Mount
Room Type	Garage, Home Office
Weight Limit	85 Pounds
Included Components	14 Gun Cabinet Matte Black Top shelf
Finish Type	Painted
Number of Shelves	1
Item Weight	84.8 pounds (38.56 Kilograms)
Assembly Required	No
Frame Material	Metal
Lock Type	Double-Bitted Key Lock
Capacity	14 rifles or shotguns up to 54" tall

Warranty and Support

For information regarding warranty coverage, product registration, or technical support for your Stack-On GCB-14P Steel 14-Gun Security Cabinet, please refer to the official Stack-On website or contact their customer service department directly.

Contact Information: Please visit the manufacturer's official website for the most current contact details and support resources.

	Stack-On GCB-18C Steel Security Cabinet Instructions Comprehensive instructions for assembling and installing the Stack-On GCB-18C Steel Security Cabinet, including parts lists, configuration options, and warranty information.
	Stack-On Welded-Steel Garage Storage Assembly Instructions and Warranty Comprehensive assembly instructions and limited one-year warranty details for Stack-On Welded-Steel Garage Storage cabinets, covering base, tall, wall, and floor locking models. Includes parts lists, tools needed, and step-by-step guidance.
	Stack-On Security Plus GC-14P Home Security Cabinet Installation and Warranty Guide This document provides detailed installation instructions for the Stack-On Security Plus GC-14P Home Security Cabinet, including barrel rest and shelf assembly, wall and floor mounting procedures, and foam installation. It also covers the installation of an optional GC-900-5 Pistol-Ammo Cabinet and includes information on requesting replacement keys or combinations, along with a one-year limited warranty.
	Stack-On Welded-Steel Garage Storage Assembly Instructions and Warranty Comprehensive assembly instructions and warranty details for Stack-On's welded-steel garage storage cabinets, covering base, tall, wall, and floor locking models. Includes safety guidelines and product specifications.
	Stack-On GCM-1918-DX Steel Security Cabinet Assembly Instructions Detailed assembly and installation instructions for the Stack-On GCM-1918-DX Steel Security Cabinet, including parts list, safety warnings, and warranty information.
	Stack-On GCM-1918-DX Security Cabinet Instructions and Warranty Comprehensive instructions for assembling, configuring, and securing the Stack-On GCM-1918-DX steel security cabinet. Includes parts list, installation guides, and limited one-year warranty information.

Stack-On GCB-14P-DS