Stanley 2-69-267 Metric Folding Key-Set (17-piece)
Model: 2-69-267 | Brand: STANLEY
Introduction
This manual provides essential information for the proper use and maintenance of your Stanley 2-69-267 Metric Folding Key-Set. Please read these instructions carefully before using the product to ensure safe and effective operation and to prolong the life of your tool.
Figure 1: Stanley 2-69-267 Metric Folding Key-Set. This image displays two folding hex key sets. One set is partially open, revealing several hex keys, while the other is closed, showcasing its compact design. Both sets feature a black body with yellow accents, characteristic of Stanley tools.
Product Overview
The Stanley 2-69-267 is a 17-piece metric folding key-set designed for various fastening and unfastening tasks. Its folding design allows for compact storage and easy portability, making it a convenient tool for DIY enthusiasts and professionals alike. The keys are made from durable alloy steel for long-lasting performance.
- Content: 17 pieces
- Material: Alloy Steel
- Color: Silver (keys), Black/Yellow (handle)
Setup
The Stanley Folding Key-Set requires minimal setup. It comes pre-assembled and ready for use.
- Unpack: Remove the key-set from its packaging.
- Inspect: Before first use, visually inspect the key-set for any signs of damage or manufacturing defects. Ensure all 17 keys are present and securely housed within the folding handle.
Figure 2: Key-Set in Open Position. This image shows one Stanley folding hex key set with several of its hex keys extended from the handle, illustrating how the keys pivot out for use. The black handle with yellow accents is clearly visible.
Operating Instructions
Using the Stanley Folding Key-Set is straightforward. Follow these steps for effective operation:
- Identify the Correct Size: Determine the required metric hex key size for your fastener. The sizes are typically marked on the keys or the handle.
- Select the Key: Gently pivot the desired hex key out from the folding handle until it locks into an open position. Ensure other keys are folded away to provide a clear grip.
- Insert the Key: Insert the hex key fully into the head of the fastener (e.g., an Allen bolt or screw). Ensure a snug fit to prevent stripping the fastener head or damaging the key.
- Apply Torque: Turn the key clockwise to tighten or counter-clockwise to loosen the fastener. Apply steady, even pressure. For stubborn fasteners, ensure a firm grip on the handle.
- Retract the Key: Once the task is complete, pivot the hex key back into the handle until it is fully retracted and secured.
Figure 3: Key-Sets in Use Environment. This image depicts two Stanley folding hex key sets on a light wooden surface, alongside various screws and a pair of safety glasses. One key set has a few keys extended, suggesting readiness for use in a typical DIY or workshop setting.
Maintenance
Proper maintenance will ensure the longevity and optimal performance of your Stanley Folding Key-Set.
- Cleaning: After each use, wipe down the keys and handle with a clean, dry cloth to remove any dirt, grease, or debris. For stubborn grime, a mild detergent solution can be used, followed by thorough drying.
- Lubrication: Periodically apply a light coat of rust-preventative oil to the metal keys, especially if stored in a humid environment. This helps prevent corrosion and ensures smooth pivoting action.
- Storage: Store the key-set in a dry place, away from direct sunlight and extreme temperatures. The folding design allows for compact storage in a toolbox, drawer, or on a pegboard.
- Inspection: Regularly inspect the keys for signs of wear, bending, or damage. Replace the entire set if any key is significantly damaged, as a compromised key can strip fasteners or cause injury.
Troubleshooting
While the Stanley Folding Key-Set is a simple tool, you might encounter minor issues. Here are some common scenarios and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Key slips or strips fastener head. | Incorrect key size; Worn key; Fastener head is stripped. | Ensure you are using the correct metric size. Inspect the key for wear; if worn, replace the set. If the fastener head is stripped, use a screw extractor or alternative method. |
| Keys are stiff to pivot. | Accumulated dirt/grime; Lack of lubrication. | Clean the pivot points thoroughly. Apply a small amount of light lubricating oil to the pivot mechanisms. |
| Rust on keys. | Exposure to moisture; Improper storage. | Clean off rust with a wire brush or fine abrasive, then apply rust-preventative oil. Store in a dry environment. |
Specifications
Detailed specifications for the Stanley 2-69-267 Metric Folding Key-Set:
- Product Name: Stanley 2-69-267 Metric Folding Key-Set
- Pieces: 17
- Key Type: Metric Hex Keys (Allen Wrenches)
- Material: Alloy Steel
- Color: Silver (keys), Black/Yellow (handle)
- Item Length: 141 Millimeters (approx. 5.55 inches)
- Item Weight: 0.31 Kilograms (approx. 0.68 pounds)
- Brand: STANLEY
Figure 4: Product Dimensions. This image shows a hand holding the Stanley folding hex key set, with an overlay indicating its approximate length as 4.8 inches (12 cm), demonstrating its compact size.
Warranty and Support
For information regarding the warranty of your Stanley 2-69-267 Metric Folding Key-Set, please refer to the official STANLEY website or contact their customer service directly. Warranty terms and conditions may vary by region and purchase date.
If you require further assistance or have questions not covered in this manual, please contact STANLEY customer support through their official channels. You can typically find contact information on the product packaging or the STANLEY official website.