Sage Stryker Prevalon Heel Protector II Instruction Manual

1. Product Overview

The Sage Stryker Prevalon Heel Protector II is a cushioned boot designed to provide pressure relief and protection for the heels of bed-bound individuals. It helps prevent heel pressure injuries, commonly known as bedsores, by elevating the foot and ensuring continuous pressure relief. Additionally, its unique design aids in preventing foot drop by maintaining the ankle in an optimal upright position.

2. Key Features and Benefits

• Pressure Relief & Protection: Elevates the foot off the mattress surface, completely floating the heel to prevent pressure injuries and provide continuous relief.
• Comfortable for Multiple Sizes: Features easily adjustable, expandable straps and stretch panels to ensure a comfortable fit for calf sizes ranging from 10 inches to 18 inches (25 cm to 46 cm). The boots are ambidextrous, fitting either foot.
• Prevents Foot Drop: The unique design helps maintain the ankle at an optimal angle, preventing foot drop which can hinder walking and increase fall risk.
• Trusted Quality: Sage Heel Protectors are utilized by healthcare professionals to reduce the risk of bedsores.

The heel protector features an open design to ensure the heel is completely offloaded, providing continuous pressure relief.

Understanding how pressure injuries can develop on the heel area.

3. Setup and Application

The Prevalon Heel Protector II is designed for easy application. It is often packaged inside out to facilitate proper placement.

1. Prepare the Protector: If packaged inside out, gently turn the protector right-side out. The soft, grey dermasuede interior should be visible.
2. Position the Foot: Carefully slide the foot into the protector, ensuring the heel is centered within the open heel area. The open design is crucial for offloading pressure.
3. Secure Straps: Fasten the adjustable closure straps around the calf and foot. Ensure the straps are snug but not overly tight, allowing for circulation and comfort. The orange contracture strap should be positioned to gently hold the foot in an upright position to prevent foot drop.
4. Check Fit: Verify that the heel remains suspended and off the mattress surface. The protector should feel like a soft pillow on the foot and leg.

The heel protector is shipped inside out for easier application and proper heel placement.

Proper application of the heel protector on a foot, showing secure straps and heel offloading.

Application Video:

This video demonstrates the features and benefits of the Sage Prevalon Heel Protector II, including visual guidance on its application.

4. Operating Instructions

Once applied, the Prevalon Heel Protector II works continuously to provide pressure relief and support. The low-friction rip-stop nylon exterior allows for easy movement and sliding over bed sheets, promoting patient freedom of movement unlike traditional pillows.

• Regular Checks: Periodically check the fit of the protector to ensure the heel remains properly offloaded and the straps are not too tight or loose.
• Ambidextrous Use: The heel protector is ambidextrous and can be used on either the left or right foot.
• Comfort: The dermasuede fabric interior gently grips the limb to keep the boot in place, even when the patient is moving, while wicking away moisture for comfort.

5. Maintenance and Care

To ensure the longevity and effectiveness of your Sage Stryker Prevalon Heel Protector II, follow these general care guidelines:

• Cleaning: Wipe the exterior and interior surfaces with a damp cloth and mild soap as needed. Allow to air dry completely before re-application. Do not machine wash or tumble dry unless specific instructions are provided on the product label.
• Inspection: Regularly inspect the protector for any signs of wear, tear, or damage, especially to the straps and Velcro closures. Discontinue use if significant damage is observed.
• Storage: Store in a clean, dry place away from direct sunlight and extreme temperatures when not in use.

6. Troubleshooting

If you encounter any issues while using the Prevalon Heel Protector II, consider the following:

• Heel Not Offloaded: Ensure the foot is correctly positioned within the protector so that the heel is suspended in the open area. Adjust the straps to secure the foot without pushing the heel onto the surface.
• Discomfort or Too Tight: Loosen the adjustable straps. The protector should be snug but not restrict circulation. Check for any folds or bunched material inside.
• Foot Drop Still Occurring: Verify that the orange contracture strap is properly positioned and tightened to hold the foot in an upright, neutral position. If the issue persists, consult a healthcare professional.
• Velcro Wear: Over time, Velcro closures may lose their effectiveness. If the straps no longer hold securely, the product may need replacement to ensure proper function and safety.
• Boot Slides Off: Ensure all straps are securely fastened and adjusted to the correct calf circumference (10-18 inches). The dermasuede interior is designed to grip the limb and minimize slippage.

7. Product Specifications

Comparison of features across Prevalon Heel Protector models.

Guide for measuring calf circumference to ensure proper fit.

8. Warranty and Support

For specific warranty information regarding your Sage Stryker Prevalon Heel Protector II, please refer to the product packaging or contact Sage customer service directly. Sage is a global medical leader committed to providing quality products.

For assistance, inquiries, or to report any issues, please contact our U.S.-based Customer Service. Contact details can typically be found on the product packaging or the official Sage website.

Disclaimer: No products are intended to diagnose, treat, cure, or prevent any disease.