1. Introduction
The WIX 58010 Automatic Transmission Filter is designed to protect your vehicle's transmission system from contaminants. Over time, metal particles from wear and fibrous material from clutch facings can accumulate in the transmission fluid. This filter effectively removes these impurities, helping to maintain transmission efficiency and extend its lifespan. Proper filtration minimizes wear on internal components and prevents issues such as sticking or scoring of sensitive shift control valves.
2. Product Overview
The WIX 58010 filter kit typically includes the transmission filter, a gasket for the transmission pan, and an O-ring. These components are crucial for a complete and effective transmission fluid service.
3. Vehicle Compatibility
The WIX 58010 Automatic Transmission Filter is compatible with specific transmission models and vehicle applications. It is essential to verify compatibility with your vehicle's make, model, and year before installation. This filter is designed for transmission models U151E, U250E, and U660E.
Compatible Vehicles Include:
- 2004-2006 Lexus ES330
- 2007-2015 Lexus ES350
- 2004-2006 Lexus RX330
- 2007-2015 Lexus RX350
- 2010-2015 Lexus RX450h
- 2009-2010 Pontiac Vibe
- 2005-2012, 2014-2015 Toyota Avalon
- 2003-2014 Toyota Camry
- 2009-2010 Toyota Corolla
- 2004-2015 Toyota Highlander
- 2009-2013 Toyota Matrix
- 2006-2012 Toyota RAV4
- 2004-2015 Toyota Sienna
- 2004-2008 Toyota Solara
- 2014-2015 Toyota Venza
Note: Always confirm the correct part number for your specific vehicle using a reliable parts catalog or by consulting a qualified mechanic.
4. Installation Guide
Installation of an automatic transmission filter typically requires specialized tools and knowledge. It is highly recommended that this procedure be performed by a certified automotive technician. Incorrect installation can lead to transmission damage or fluid leaks.
General Installation Steps:
- Preparation: Ensure the vehicle is on a level surface, securely supported by jack stands, and the engine is cool. Place a drain pan underneath the transmission.
- Drain Fluid: Carefully loosen and remove the transmission pan bolts. Allow the transmission fluid to drain completely. Some fluid may remain in the pan.
- Remove Transmission Pan: Once the fluid has drained, remove all remaining pan bolts and carefully lower the transmission pan. Be prepared for additional fluid spillage.
- Remove Old Filter: Locate and remove the old transmission filter. This usually involves unbolting it or pulling it straight down from the valve body. Ensure the old O-ring is also removed from the transmission housing.
- Clean Pan and Magnet: Thoroughly clean the inside of the transmission pan, removing any old gasket material and debris. Clean the pan magnet, which collects metallic particles.
- Install New Filter: Install the new WIX 58010 filter, ensuring the new O-ring is correctly seated. Secure the filter with the appropriate bolts, if applicable.
- Install New Gasket: Place the new pan gasket onto the clean transmission pan. Ensure it is properly aligned.
- Reinstall Transmission Pan: Carefully lift the transmission pan with the new gasket into position and hand-tighten a few bolts to hold it in place. Then, install all remaining bolts.
- Torque Bolts: Using a torque wrench, tighten the transmission pan bolts to the manufacturer's specified torque settings in a cross-diagonal pattern. Overtightening or undertightening can cause leaks.
- Refill Fluid: Refer to your vehicle's service manual for the correct type and quantity of automatic transmission fluid. Slowly add the specified amount of new fluid through the dipstick tube.
- Check Fluid Level: Start the engine, shift through all gears, and then check the fluid level according to your vehicle's manual (typically with the engine running and warm). Add fluid as needed.
- Inspect for Leaks: After driving the vehicle for a short period, inspect the transmission pan for any signs of leaks.
Important: Always use the transmission fluid type specified by your vehicle manufacturer. Using an incorrect fluid can cause severe transmission damage.
5. Function and Operation
The WIX 58010 Automatic Transmission Filter operates by continuously filtering the transmission fluid as it circulates through the transmission system. Its primary function is to capture and retain contaminants such as metal shavings, dirt, and other debris that can degrade fluid quality and harm internal components. By maintaining clean fluid, the filter ensures smooth operation of clutches, bands, and valves, contributing to consistent shift performance and overall transmission longevity.
6. Maintenance Recommendations
Regular maintenance of your automatic transmission is crucial for its performance and durability. The transmission filter is a key component in this maintenance schedule.
- Replacement Interval: Consult your vehicle's owner's manual or service schedule for the recommended transmission fluid and filter replacement intervals. These intervals can vary significantly based on driving conditions and vehicle usage.
- Fluid Type: Always use the exact type of automatic transmission fluid specified by your vehicle manufacturer. Mixing fluid types or using an incompatible fluid can lead to severe transmission issues.
- Professional Service: Due to the complexity of transmission service, it is advisable to have fluid and filter changes performed by a qualified mechanic.
7. Troubleshooting Common Issues
If you encounter issues after replacing your transmission filter, consider the following common problems and their potential causes:
- Fluid Leaks:
- Cause: Improperly seated pan gasket, damaged gasket, loose pan bolts, or incorrect torque on pan bolts.
- Solution: Re-check pan bolt torque, inspect gasket for damage, and ensure the pan is installed correctly.
- Incorrect Fluid Level:
- Cause: Overfilling or underfilling the transmission fluid.
- Solution: Verify fluid level according to the vehicle manufacturer's procedure (engine warm, running, on level ground) and adjust as necessary.
- Transmission Shifting Problems:
- Cause: Incorrect fluid type, air in the system, or a faulty filter (rare).
- Solution: Ensure correct fluid type was used. If problems persist, professional diagnosis is recommended.
- Filter Not Fitting:
- Cause: Incorrect filter part number for the specific vehicle application.
- Solution: Double-check vehicle compatibility and ensure the correct WIX 58010 filter was purchased.
If you experience persistent issues, consult a professional automotive technician.
8. Product Specifications
Key specifications for the WIX 58010 Automatic Transmission Filter are provided below:
| Specification | Detail |
|---|---|
| Manufacturer | WIX |
| Model Number | 58010 |
| Item Weight | 11.2 ounces (approximately 317.5 grams) |
| Product Dimensions | 11.82 x 8.13 x 5.28 inches (approx. 30.02 x 20.65 x 13.41 cm) |
| Material | Metal and Plastic |
| OEM Part Number | 58010 |
9. Warranty Information
For detailed warranty information regarding the WIX 58010 Automatic Transmission Filter, please refer to the official WIX Filters website or contact WIX customer service directly. Warranty terms and conditions may vary.
10. Customer Support
If you have questions, require technical assistance, or need further information about the WIX 58010 Automatic Transmission Filter, please contact WIX Filters customer support. You can typically find contact information on the official WIX Filters website (www.wixfilters.com) or through your local WIX product distributor.
