Schonbek 9656-40CL

Schonbek 9656-40CL Rhiannon Chandelier User Manual

Model: 9656-40CL

Introduction

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Schonbek 9656-40CL Rhiannon Chandelier. Please read all instructions carefully before beginning installation and retain this manual for future reference. This chandelier is designed to provide elegant illumination and is crafted with high-quality crystal components.

Safety Information

WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. Consult a qualified electrician if you are unsure about wiring procedures.

  • Ensure the mounting surface can support the weight of the fixture.
  • All wiring connections must be in accordance with local electrical codes.
  • Do not exceed the maximum wattage specified for the bulbs.
  • Handle crystal components with care to prevent breakage.
  • Keep packaging materials away from children.

Package Contents

Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, do not proceed with installation and contact customer support.

  • Chandelier Frame Assembly
  • Mounting Hardware (crossbar, screws, wire nuts)
  • Canopy and Chain
  • Crystal Components (various shapes and sizes)
  • Instruction Manual
  • Note: Bulbs are not included.

Setup & Installation

Professional installation is recommended for this fixture. Ensure power is disconnected at the circuit breaker before proceeding.

Step 1: Prepare for Installation

  1. Turn off power at the main circuit breaker.
  2. Unpack all components and lay them out on a clean, soft surface to prevent scratches.
  3. Identify all parts against the package contents list.

Step 2: Mount the Fixture

  1. Attach the mounting crossbar to the outlet box using the provided screws.
  2. Thread the fixture wires through the center hole of the crossbar.
  3. Secure the chain to the mounting loop on the crossbar and adjust to the desired hanging height.
  4. Feed the electrical wires through the chain and canopy.

Step 3: Electrical Connections

  1. Connect the fixture's black wire to the house's black (hot) wire using a wire nut.
  2. Connect the fixture's white wire to the house's white (neutral) wire using a wire nut.
  3. Connect the fixture's ground wire to the house's ground wire (or bare copper) and to the mounting crossbar using a green ground screw.
  4. Carefully tuck all wires into the outlet box.

Step 4: Secure Canopy and Install Bulbs

  1. Slide the canopy up the chain and secure it against the ceiling, covering the outlet box.
  2. Install the required bulbs (B10-6, 60W Max, not included) into the sockets. Do not overtighten.

Step 5: Crystal Dressing

Carefully attach the crystal components to the chandelier frame according to the included crystal diagram (if provided, otherwise follow general placement). Handle crystals by their edges to avoid fingerprints.

Schonbek 9656-40CL Rhiannon Chandelier, a silver-finished fixture adorned with crystal elements and six candle-style light bases.

Figure 1: The Schonbek Rhiannon Chandelier. This image displays the complete Schonbek Rhiannon Chandelier, featuring its elegant silver frame, multiple crystal components, and six light sockets designed for B10-6 bulbs. The chandelier is suspended by a chain, showcasing its intricate design suitable for various interior settings.

Operating Instructions

Once installation is complete and all connections are secure, restore power at the circuit breaker. The chandelier can then be operated via a standard wall switch connected to the fixture's circuit.

  • Bulb Type: B10-6
  • Maximum Wattage: 60 Watts per bulb
  • Ensure bulbs are fully screwed into their sockets for proper contact.

Maintenance

Regular cleaning will help maintain the beauty and luster of your chandelier.

Cleaning

  • Always disconnect power before cleaning the fixture.
  • For crystal components: Use a soft, lint-free cloth dampened with a mild glass cleaner or distilled water. Avoid abrasive cleaners.
  • For metal frame: Wipe with a soft, dry cloth. Do not use harsh chemicals or abrasive materials, as they may damage the finish.
  • Do not spray cleaner directly onto the fixture; spray onto the cloth first.

Bulb Replacement

  • Ensure power is off and bulbs have cooled completely before attempting to replace them.
  • Unscrew the old bulb counter-clockwise.
  • Screw in the new B10-6 bulb (max 60W) clockwise until snug. Do not overtighten.

Troubleshooting

ProblemPossible CauseSolution
Light does not turn on.
  • Power is off at the circuit breaker.
  • Loose wire connection.
  • Faulty bulb.
  • Check circuit breaker and wall switch.
  • Verify all wire connections are secure (with power off).
  • Replace bulb with a known good one.
Light flickers.
  • Loose bulb.
  • Loose wire connection.
  • Incompatible dimmer switch (if applicable).
  • Tighten bulb.
  • Check wire connections (with power off).
  • Ensure dimmer switch is compatible with incandescent bulbs.
Chandelier hangs crooked.
  • Improperly secured mounting hardware.
  • Uneven chain length.
  • Re-check mounting crossbar and canopy installation.
  • Adjust chain length as needed.

Specifications

  • Brand: Schonbek
  • Model Number: 9656-40CL
  • Material: Crystal
  • Color: Silver
  • Item Weight: 13 Pounds
  • Bulb Type: B10-6 (Not Included)
  • Max Wattage: 60 Watts per bulb
  • UPC: 771857272468
  • ASIN: B002LUNKP4

Warranty & Support

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Schonbek website. Keep your proof of purchase for any warranty claims.

Schonbek Customer Service: Please refer to the contact information provided on the manufacturer's website or your purchase receipt.

© 2026 Schonbek. All rights reserved.