1. Introduction
The OSRAM LEDstixx is a versatile, battery-powered LED lamp designed for various indoor lighting applications. Its compact design and flexible mounting options make it suitable for use as an orientation light, night light, reading lamp, portable flashlight, kitchen lighting, shelf lighting, or ambient light. The lamp features a durable silver aluminum casing and provides a cool white light.
Image 1.1: The OSRAM LEDstixx lamp in its standard configuration.
2. Safety Instructions
- Read all instructions before use and retain for future reference.
- This product is intended for indoor use only. Avoid exposure to water or high humidity.
- Do not mix old and new batteries, or different types of batteries.
- Ensure batteries are inserted with correct polarity (+/-). Incorrect insertion can cause damage.
- Remove batteries if the lamp will not be used for an extended period to prevent leakage.
- Dispose of used batteries according to local regulations. Do not dispose of batteries in fire.
- Do not attempt to disassemble or modify the lamp. There are no user-serviceable parts inside other than batteries.
- Keep out of reach of children.
3. Package Contents
Verify that all items are present in the package:
- 1 x OSRAM LEDstixx Lamp
- 1 x Mounting Base
- 3 x AAA Batteries
- Adhesive Pad (pre-applied to base)
- Magnetic Mount (integrated into base)
- Screws for mounting (optional)
Image 3.1: The OSRAM LEDstixx lamp in its packaging.
4. Setup
4.1 Battery Installation
- Gently twist and pull the LED light bar from its mounting base.
- Locate the battery compartment on the back of the LED light bar.
- Insert 3 AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Replace the LED light bar onto its mounting base, ensuring it clicks securely into place.
4.2 Mounting Options
The LEDstixx offers flexible mounting options:
- Adhesive Mounting: The base has a pre-applied adhesive pad. Peel off the protective film and firmly press the base onto a clean, dry, smooth surface.
- Magnetic Mounting: The base contains a magnet, allowing it to be attached to metallic surfaces without additional fasteners.
- Screw Mounting: For a more permanent installation, the base can be screwed onto a surface. Use the provided screws and ensure the surface is suitable for drilling.
Image 4.1: Mounting options for the LEDstixx.
Image 4.2: Visual guide for operation and mounting.
5. Operating Instructions
5.1 Turning On/Off
The LEDstixx features an integrated on/off switch. Press the switch located on the side of the LED light bar to turn the lamp on or off.
5.2 Adjusting Light Direction
The LED light bar can be rotated 360 degrees within its mounting base, allowing you to direct the light horizontally or vertically as needed. Simply rotate the light bar to achieve the desired illumination angle.
Image 5.1: LEDstixx mounted for horizontal illumination.
6. Maintenance
6.1 Battery Replacement
When the light dims or fails to turn on, it is time to replace the batteries. Follow the steps in Section 4.1 to remove the light bar, replace the 3 AAA batteries, and reattach the light bar to its base.
6.2 Cleaning
To clean the lamp, wipe it with a soft, slightly damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electronic components. Ensure the lamp is off and dry before use.
7. Troubleshooting
- Lamp does not turn on:
- Check if the batteries are inserted correctly with the correct polarity.
- Replace the batteries with new ones.
- Ensure the on/off switch is fully engaged.
- Light is dim:
- The batteries may be low. Replace them with new AAA batteries.
- Lamp falls off mounting surface:
- If using adhesive mounting, ensure the surface was clean, dry, and smooth before application. Reapply with a stronger adhesive if necessary.
- If using magnetic mounting, ensure the metallic surface is sufficiently strong to hold the lamp's weight.
- Consider using screw mounting for a more secure installation.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | OSRAM |
| Model Number | 80189 |
| Dimensions (L x W x H) | 22.5 x 7 x 7 cm |
| Weight | 140 grams |
| Batteries | 3 x AA (included) |
| IP Rating | IP20 |
| Style | LEDstixx |
| Color | Silver |
| Shape | Stick |
| Number of Bulbs | 4 |
| Voltage | 5 Volts |
| Specific Uses | For indoor use |
| Special Features | Energy-saving |
| Shade Color | White |
| Power Source | Battery Powered |
| Bulb Type | LED |
| Bulb Diameter | 1.6 Centimeters |
| Length | 22.5 Centimeters |
Image 8.1: Dimensional drawing of the LEDstixx.
9. Warranty and Support
For warranty information and customer support, please refer to the official OSRAM website or contact your local retailer. Keep your proof of purchase for any warranty claims.
