Westclox Plasma LED Alarm Clock (Model 70014) Instruction Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Westclox Plasma LED Alarm Clock, Model 70014. Designed for convenience and functionality, this digital alarm clock features a clear LED display, USB-C charging, and a battery backup system. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your device.

Westclox Plasma LED Alarm Clock, front view showing red LED time display

Figure 1: Front view of the Westclox Plasma LED Alarm Clock.

Key Features

Easy-to-Read Display: Features large, bold red LED numbers for high visibility from a distance.
Loud Alarm with Snooze Function: Equipped with a loud alarm suitable for heavy sleepers and a convenient snooze button for temporary silence.
Customizable Brightness Settings: Offers three dimmer levels (Bright, Medium, Dim) to adjust display brightness for comfortable viewing in any lighting condition.
USB-C Charging Port: Includes a built-in USB Type-C port for charging smartphones or other compatible devices.
Battery Backup: Requires 1 AAA battery (not included) to retain time settings during power outages.
Modern and Compact Design: Sleek black case designed to blend seamlessly with various room decors.

Setup

1. Power Connection

Connect the included USB-C cable to the "POWER IN" port on the back of the alarm clock.
Plug the other end of the USB-C cable into a compatible USB power adapter (not included) and then into a wall outlet. The display will illuminate.

2. Battery Installation (for Backup)

Locate the battery compartment on the underside of the clock.
Open the compartment and insert 1 AAA battery (not included), ensuring correct polarity (+/-).
Close the battery compartment. This battery will maintain time settings during power interruptions.

Back view of the Westclox Plasma LED Alarm Clock showing control buttons and USB ports

Figure 2: Rear view with control buttons and USB ports.

Operating Instructions

1. Setting the Time

Press and hold the "TIME SET" button (located on the back or top, refer to Figure 2). The hour digits will begin to flash.
Use the "HOUR" button to adjust the hour. Pay attention to the PM indicator light.
Press the "TIME SET" button again. The minute digits will flash.
Use the "MINUTE" button to adjust the minutes.
Press the "TIME SET" button one more time to confirm and exit time setting mode.

2. Setting the Alarm

Press and hold the "ALARM SET" button (located on the back or top, refer to Figure 2). The alarm hour digits will begin to flash.
Use the "HOUR" button to adjust the alarm hour. Ensure the correct AM/PM is selected.
Press the "ALARM SET" button again. The alarm minute digits will flash.
Use the "MINUTE" button to adjust the alarm minutes.
Press the "ALARM SET" button one more time to confirm and exit alarm setting mode.
To activate the alarm, slide the "ALARM ON/OFF" switch to the "ON" position. An alarm indicator light will appear on the display.

3. Snooze Function

When the alarm sounds, press the large "SNOOZE" button on the top of the clock. The alarm will temporarily pause and sound again after approximately 9 minutes.

Top view of the Westclox Plasma LED Alarm Clock showing the large snooze button

Figure 3: Top view highlighting the Snooze button.

4. Display Dimmer

The clock features three display brightness levels: Bright, Medium, and Dim. To adjust the brightness, locate the "DIMMER" switch or button (refer to Figure 2) and cycle through the options until your desired brightness is achieved.

5. USB Charging

The clock includes a USB Type-C "CHARGE OUT" port. Connect your smartphone or other compatible device to this port using its charging cable to utilize the clock as a charging station.

Westclox Plasma LED Alarm Clock charging a smartphone via its USB-C port

Figure 4: USB-C charging port in use.

Video 1: Official product video demonstrating Westclox LED Alarm Clock features.

Maintenance

Cleaning: Use a soft, dry cloth to clean the exterior of the clock. Avoid abrasive cleaners or solvents.
Battery Replacement: Replace the AAA backup battery annually or if you notice time discrepancies during power outages.
Storage: If storing the clock for an extended period, remove the backup battery to prevent leakage.

Troubleshooting

Problem	Possible Cause	Solution
Display is blank	No power or power outage.	Ensure USB-C cable is securely connected to a working power adapter and outlet. Check if backup battery is installed and functional.
Alarm does not sound	Alarm is not activated or set incorrectly.	Verify the "ALARM ON/OFF" switch is in the "ON" position. Re-check alarm time settings.
Display is too bright/dim	Dimmer setting is incorrect.	Adjust the "DIMMER" switch/button to cycle through brightness levels.
Time is incorrect after power outage	Backup battery is missing or depleted.	Install a fresh AAA battery for backup. Reset the time if necessary.

Specifications

Feature	Detail
Brand	Westclox
Model Number	70014
Color	Black
Display Type	Digital LED (Red)
Display Size	0.9-Inch (digit height)
Power Source	Electrical (USB-C cable included, adapter not included)
Battery Backup	1 AAA battery (not included)
Special Features	Alarm, Snooze, 3-Level Dimmer, USB-C Charge Out Port
Material	Plastic
Item Weight	7.84 ounces
Mounting Type	Tabletop

Warranty and Support

This Westclox Plasma LED Alarm Clock comes with a limited warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included in the product packaging or visit the official Westclox website. Keep your purchase receipt as proof of purchase.

For additional information or assistance, you may visit the Westclox Store on Amazon.

	Westclox Duet Model No. 80183 Clock Radio: User Manual, Features, and Warranty Comprehensive user manual for the Westclox Duet Model No. 80183 clock radio. This guide provides detailed instructions on power connection, operating the AM/FM radio, setting the time, configuring dual alarms, utilizing the snooze function, managing the sleep timer, and information on the limited warranty.
	Westclox Model 70026 Atomic Digital Alarm Clock Instructions and Warranty User manual for the Westclox Model 70026 atomic digital alarm clock, providing detailed instructions on installation, time setting, time zone selection, and alarm configuration.
	Westclox Model 70035 Digital Alarm Clock: Instructions and Warranty User manual and warranty information for the Westclox Model 70035 digital alarm clock, covering setup, operation, care, and warranty details.
	Westclox Big Ben and Baby Ben Identification Guide: History, Styles, and Models A comprehensive identification guide to Westclox Big Ben and Baby Ben alarm clocks, detailing their history, case styles, movements, advertising, and reproductions from 1909 to the present.
	Westclox 72115 Instructions and Warranty This document provides instructions and warranty information for the Westclox 72115 alarm clock, including setup, battery backup, and FCC remarks.
	WESTCLOX CR-232 Bluetooth Digital Alarm Clock Radio Instruction Manual This document provides comprehensive instructions for operating the WESTCLOX CR-232 Bluetooth Digital Alarm Clock Radio, including setup, safety precautions, feature usage, and technical specifications.

Westclox 70014