COMP Cams GFT-1 Flexible Head Screwdriver User Manual

Introduction

This manual provides essential information for the proper use, maintenance, and care of your COMP Cams GFT-1 Flexible Head Screwdriver. Designed for accessing fasteners in confined or awkward spaces, this tool features a flexible shaft and a 6-7mm hex head. Please read this manual thoroughly before operating the tool to ensure safe and effective use.

Figure 1: The COMP Cams GFT-1 Flexible Head Screwdriver. This image displays the screwdriver with its blue handle, flexible shaft, and 6-7mm hex head, designed for reaching fasteners in tight spaces.

Safety Information

Always observe basic safety precautions when using hand tools. Failure to do so may result in injury or damage to the tool or workpiece.

• Wear appropriate personal protective equipment, such as safety glasses.
• Ensure the tool is clean and in good working condition before each use.
• Do not use the tool for purposes other than its intended design.
• Avoid applying excessive force that could damage the tool or the fastener.
• Keep hands and fingers clear of moving parts or sharp edges.

Setup

The COMP Cams GFT-1 Flexible Head Screwdriver is ready for immediate use upon unboxing. No assembly is required.

1. Inspection: Before first use, inspect the screwdriver for any signs of damage or manufacturing defects. Ensure the flexible shaft is intact and the hex head is securely attached.
2. Familiarization: Hold the screwdriver and familiarize yourself with its grip and the flexibility of the shaft.

Operating Instructions

The GFT-1 screwdriver is designed for tightening or loosening 6mm and 7mm hex head fasteners, particularly in areas with limited access.

1. Select Correct Size: Ensure the fastener you intend to work with is a 6mm or 7mm hex head. The GFT-1 is specifically sized for these applications.
2. Positioning: Guide the flexible shaft to align the hex head with the fastener. The flexible design allows you to navigate around obstacles.
3. Engagement: Firmly seat the hex head onto the fastener. Ensure full engagement to prevent stripping the fastener head.
4. Turning: Apply rotational force to the handle while maintaining pressure on the fastener to prevent slippage. Turn clockwise to tighten and counter-clockwise to loosen.
5. Avoid Over-tightening: Tighten fasteners only to the required torque specification. Over-tightening can damage the fastener or the component.

Maintenance

Proper maintenance extends the life of your tool and ensures continued performance.

• Cleaning: After each use, wipe the screwdriver clean with a dry cloth to remove dirt, grease, or debris. For stubborn grime, a mild degreaser can be used, followed by thorough drying.
• Storage: Store the tool in a dry environment, away from direct sunlight and corrosive materials.
• Inspection: Periodically inspect the flexible shaft for kinks, cracks, or signs of wear. Check the hex head for rounding or damage. Discontinue use if significant wear or damage is observed.

Troubleshooting

Specifications

• Brand: Comp Cams
• Model Name: GFT-1
• Item Model Number: GFT-1
• Manufacturer Part Number: GFT-1
• UPC: 036584032670
• Color: Black
• Number of Items: 1
• Item Dimensions (L x W x H): 12.5 x 3.5 x 1.5 inches
• Item Weight: 10.4 ounces
• Manufacturer: COMP Cams

Warranty and Support

This COMP Cams product is backed by the manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official COMP Cams website.

For technical support, product inquiries, or warranty claims, please contact COMP Cams directly through their official customer service channels. Contact information can typically be found on their website or product packaging.

Note: Keep your purchase receipt as proof of purchase for warranty purposes.