1. Introduction
Thank you for choosing the Progress Lighting P3597-09 Semi-Flush Fixture. This fixture is part of the North Park Collection, offering a modern interpretation of the classic Craftsman style with clean linear forms and square etched glass. It is designed to provide a softly diffused lighting effect and can be installed as either a close-to-ceiling or a hanging fixture, with all necessary hardware included. This manual will guide you through the installation, operation, and maintenance of your new lighting fixture.
Figure 1.1: The P3597-09 fixture shown in its semi-flush mounting configuration. It features a brushed nickel finish and square etched glass, embodying a Craftsman and Mission design blend.
2. Safety Information
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be fatal or cause serious damage to property. All wiring connections must be in accordance with local and national electrical codes. If you are unsure about any part of the installation, consult a qualified electrician.
- Always disconnect power at the main circuit breaker or fuse box before beginning installation or performing any maintenance.
- Do not connect this fixture to an ungrounded electrical system.
- Do not exceed the maximum wattage specified for the bulbs (2 x 100-Watt medium base bulbs).
- Handle glass components with care to prevent breakage.
- Ensure all connections are secure and properly insulated.
3. Package Contents
Carefully unpack your fixture and identify all parts. Keep the packaging materials until you are sure all parts are present and in good condition. If any parts are missing or damaged, do not attempt to install the fixture.
- Fixture Body with Brushed Nickel Finish
- Square Etched Glass Shade
- Mounting Hardware (Crossbar, Screws, Wire Nuts)
- Chain (for hanging installation option)
- Ceiling Mount Canopy (for semi-flush installation option)
- Instruction Manual
4. Setup and Installation
This fixture offers two installation options: semi-flush mount or hanging with a chain. Choose the appropriate method for your space.
4.1. Pre-Installation
- Turn off power at the circuit breaker.
- Remove existing fixture (if applicable).
- Identify supply wires: black (hot), white (neutral), and green or bare copper (ground).
4.2. Semi-Flush Mount Installation
- Attach the mounting crossbar to the outlet box using the provided screws.
- Connect the fixture's ground wire to the supply ground wire using a wire nut.
- Connect the fixture's white wire to the supply white (neutral) wire.
- Connect the fixture's black wire to the supply black (hot) wire.
- Carefully tuck all wires into the outlet box.
- Align the fixture's canopy with the mounting screws on the crossbar and secure it in place.
- Attach the etched glass shade to the fixture body according to the specific design (usually by twisting or securing with decorative nuts).
Figure 4.1: A detailed view of the brushed nickel finish and the connection point for the etched glass shade, illustrating the quality of the material and craftsmanship.
4.3. Hanging Fixture Installation (with Chain)
- Follow steps 1-5 from the Semi-Flush Mount Installation.
- Determine the desired hanging length and adjust the chain accordingly.
- Thread the fixture's electrical wires through the chain and the canopy.
- Secure the chain to the mounting loop on the crossbar and to the fixture body.
- Slide the canopy up the chain and secure it to the ceiling, covering the outlet box.
- Attach the etched glass shade to the fixture body.
Figure 4.2: The P3597-09 fixture configured for hanging installation, showcasing the included chain and how it integrates with the fixture's design.
Figure 4.3: A close-up view of the chain's connection point to the fixture's top canopy, demonstrating the secure and integrated design for hanging applications.
5. Operating Instructions
Once the fixture is securely installed and wired, you can begin operation.
- Install Bulbs: Insert two (2) 100-Watt maximum medium base (E26) incandescent bulbs into the sockets. Ensure bulbs are fully seated.
- Restore Power: Turn the power back on at the main circuit breaker.
- Activate Light: Use the wall switch connected to the fixture to turn the light on and off.
The etched glass shade provides a softly diffused light, ideal for various indoor settings.
6. Maintenance
Regular maintenance will help preserve the appearance and functionality of your fixture.
- Cleaning: To clean the fixture, wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass. For the etched glass, a slightly damp cloth can be used, followed by a dry cloth.
- Bulb Replacement: Always turn off power at the circuit breaker before replacing bulbs. Allow bulbs to cool completely before touching them. Replace with bulbs of the same type and wattage (2 x 100-Watt max, medium base).
- Inspection: Periodically inspect the wiring and connections for any signs of wear or damage. If any issues are found, consult a qualified electrician.
7. Troubleshooting
If your fixture is not operating correctly, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to fixture | Check circuit breaker or fuse. Ensure wall switch is ON. |
| Light does not turn on | Loose wire connections | Turn off power, check all wire connections. Secure them firmly. |
| Light does not turn on | Faulty bulb | Replace bulb with a new one of the correct type and wattage. |
| Flickering light | Loose bulb or wiring | Turn off power, tighten bulb. Check wire connections. |
| Humming noise | Incompatible dimmer switch | Ensure dimmer switch is compatible with incandescent bulbs. |
If the problem persists after trying these solutions, please contact a qualified electrician or Progress Lighting customer support.
8. Specifications
Detailed technical specifications for the P3597-09 fixture:
| Attribute | Value |
|---|---|
| Model Number | P3597-09 |
| Dimensions (Width x Height) | 12-3/4 inches (32.38 cm) x 13-5/8 inches (34.61 cm) |
| Product Dimensions (Overall) | 33.02 x 33.02 x 35.56 cm |
| Item Weight | 2.72 kg (6 lbs) |
| Material | Glass, Metal (Brushed Nickel Finish) |
| Bulb Type | Incandescent (Medium Base / E26) |
| Number of Bulbs | 2 |
| Max Wattage per Bulb | 100 Watts |
| Voltage | 120 Volts |
| Installation Method | Semi Flush Mount / Hanging (Chain Included) |
| Style | Mission / Craftsman |
| Color | Brushed Nickel |
Figure 8.1: Dimensional diagram of the P3597-09 fixture, indicating a width of 12-3/4 inches and a height of 13-5/8 inches.
9. Warranty and Support
Progress Lighting offers a 1-Year Limited Warranty on this product, covering defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical assistance, missing parts, or warranty inquiries, please contact Progress Lighting customer support. Refer to the contact information provided on the product packaging or the official Progress Lighting website.
Manufacturer: Progress Lighting
Place of Business: GREENVILLE, SC, 29607 US
