Introduction
The Shift3 LCD Touch Panel Phone is designed to enhance your communication experience with its advanced features and user-friendly interface. This phone eliminates the need to rush to answer calls by providing a talking caller ID function and a luminescent touch pad for clear visibility and easy operation.
Equipped with over 20 functions, including an illuminated cobalt blue display, 16 distinct ringtones, a built-in alarm clock, a 10-digit calculator, and a calendar, this device offers comprehensive utility for both home and office environments. Its lighted keypad ensures effortless dialing in any lighting condition, complemented by a speakerphone and a pivot base for versatile placement.
Image: The Shift3 LCD Touch Panel Phone, showcasing its sleek black design, illuminated blue LCD screen, and touch-sensitive keypad. The handset rests on the left side of the main unit, connected by a coiled cord.
Setup
Package Contents
- Shift3 LCD Touch Panel Phone Unit
- Handset
- Coiled Handset Cord
- Telephone Line Cord
- User Manual (this document)
- Note: 4 x AA batteries (not included) are required for full functionality of certain features like the display and caller ID memory.
Connecting the Phone
- Connect the Handset: Insert one end of the coiled handset cord into the jack on the side of the phone unit and the other end into the jack on the handset.
- Connect the Telephone Line: Plug one end of the telephone line cord into the "LINE" jack on the back of the phone unit and the other end into your wall telephone jack.
- Install Batteries: Open the battery compartment on the bottom of the phone unit. Insert 4 x AA batteries, ensuring correct polarity (+/-). Close the compartment securely. These batteries power the LCD display and maintain settings during power outages.
- Initial Power-Up: Once connected, the phone's display should illuminate, indicating it is ready for use.
Operating Instructions
Basic Call Functions
- Making a Call:
- Lift the handset or press the HANDS FREE button to activate the speakerphone.
- Dial the desired phone number using the illuminated keypad.
- Wait for the call to connect.
- Receiving a Call:
- When the phone rings, lift the handset or press the HANDS FREE button to answer.
- Ending a Call:
- Place the handset back on the cradle or press the HANDS FREE button again if using speakerphone.
- Speakerphone: Press the HANDS FREE button to toggle speakerphone mode on or off during a call.
- Volume Adjustment: Use the VOL buttons (UP/DOWN) to adjust the speakerphone or handset volume during a call.
Caller ID Functions
- Talking Caller ID: The phone will audibly announce the caller's number when an incoming call is detected, provided you have Caller ID service from your telephone provider.
- Viewing Call History:
- When the phone is idle, press the UP or DOWN buttons to scroll through the stored caller ID records.
- Press REDIAL to call back a number from the caller ID list.
- Press DELETE to remove a record from the caller ID history.
Advanced Features
- Luminescent Touch Pad: The touch panel and keypad illuminate when the handset is lifted or during hands-free operation, providing clear visibility in low-light conditions.
- Ringtones: The phone offers 16 different ringtones. Consult the on-screen menu (accessed via the SET button) to customize your preferred ringtone.
- Alarm Clock: Access the alarm clock function through the SET menu. Follow the on-screen prompts to set the time and activate the alarm.
- 10-Digit Calculator: Press the AC button to clear the display, then use the number keys and arithmetic operators (+, -, *, /, =) on the keypad to perform calculations.
- Calendar: The display shows the current date (month/day/day of week). This is automatically set via the phone line or can be manually adjusted through the SET menu.
- Hold Function: During a call, press the HOLD button to place the call on hold. Press it again to resume the call.
- Redial: Press the REDIAL button to automatically dial the last number called.
- Flash: The FLASH button is used for call waiting or transferring calls, depending on your telephone service provider's features.
Maintenance
To ensure the longevity and optimal performance of your Shift3 LCD Touch Panel Phone, follow these maintenance guidelines:
- Cleaning: Use a soft, slightly damp cloth to clean the exterior of the phone. Avoid using abrasive cleaners, solvents, or strong chemicals, as these can damage the finish and electronic components. Do not spray cleaners directly onto the phone.
- Environment: Keep the phone away from excessive heat sources, direct sunlight, and moisture. Ensure it is placed on a stable, flat surface to prevent accidental falls.
- Battery Replacement: If the display becomes dim or features like caller ID memory are inconsistent, replace the 4 x AA batteries in the compartment. Dispose of old batteries responsibly.
Troubleshooting
If you encounter issues with your Shift3 LCD Touch Panel Phone, please refer to the following common problems and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No dial tone. | Telephone line cord is disconnected or faulty. | Ensure the telephone line cord is securely plugged into both the phone and the wall jack. Test with another phone if available. |
| LCD display is blank or dim. | Batteries are low or incorrectly installed. | Check battery polarity and replace the 4 x AA batteries if necessary. |
| Caller ID not displaying. | No Caller ID service from your provider; batteries are low. | Contact your telephone service provider to confirm Caller ID service. Replace batteries. |
| Keypad unresponsive or sticky. | Debris under keys; internal malfunction. | Gently clean around the keys. If the issue persists, contact customer support. |
| Handset not working (no audio). | Handset cord is loose or faulty; internal connection issue. | Ensure the coiled handset cord is firmly connected at both ends. Try wiggling the cord gently. If possible, test with a replacement handset cord. |
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 9.5 x 8.2 x 3.4 inches |
| Item Weight | 1.75 pounds |
| Model Number | 1624894 |
| Brand | SHIFT |
| Color | Black |
| Telephone Type | Corded |
| Power Source | Corded Electric |
| Dialer Type | Single Keypad |
| Answering System Type | Digital |
| Recording Capacity | 16 minutes (for digital answering system, if applicable) |
| Multiline Operation | Single-Line Operation |
Warranty and Support
For warranty information or technical support regarding your Shift3 LCD Touch Panel Phone, please refer to the documentation included with your purchase or contact the manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.
For further assistance, you may visit the official SHIFT brand store online or contact their customer service department. Contact details are typically available on the manufacturer's website or product packaging.
