STANLEY TimerMax Indoor Weekly Digital Timer

Introduction

The STANLEY TimerMax Indoor Weekly Digital Timer is designed to automate the operation of lamps and other electrical devices. This timer allows you to set up to 8 distinct ON/OFF programs per week, helping to conserve energy and enhance home security. Its built-in rechargeable battery ensures that your programmed settings are retained even during power outages or when the unit is unplugged.

Safety Information

• For indoor use only. Do not expose to water or moisture.
• Do not exceed the electrical ratings of 120V/10A/1200W. Overloading may cause damage or fire.
• Ensure the timer is securely plugged into a grounded outlet.
• Do not disassemble or attempt to repair the unit. Refer all servicing to qualified personnel.
• Keep out of reach of children.

Package Contents

• 1 x STANLEY 31200 TimerMax Indoor Weekly Digital Timer
• 1 x Instruction Manual

Product Overview

The image displays the STANLEY 31200 TimerMax Indoor Weekly Digital Timer. It is a white, rectangular device with a black grounded outlet on the left side. The front features a digital LCD screen showing 'TU' (Tuesday), 'AUTO OFF', and '8:20 AM'. Below the screen are six oval-shaped buttons: 'TIME', 'HOUR', 'MIN' in the top row, and 'PROG', 'ON/OFF AUTO', 'WEEK' in the bottom row. The 'STANLEY' brand name is embossed above the screen.

Control Buttons and Display:

• TIME: Used to set the current time and day.
• HOUR: Adjusts the hour during time and program setting.
• MIN: Adjusts the minute during time and program setting.
• PROG: Enters and navigates through the programming modes (P1 ON, P1 OFF, P2 ON, etc.).
• ON/OFF AUTO: Manually overrides the timer to ON, OFF, or AUTO mode.
• WEEK: Selects the day(s) of the week for current time setting or program setting.
• LCD Display: Shows current time, day, operating mode (AUTO ON/OFF), and program settings.

Setup

1. Initial Battery Activation:

   Plug the timer into a standard 120V wall outlet for at least one hour. This charges the internal rechargeable battery. After charging, unplug the timer and press the recessed RESET button (usually located on the back or side, use a pen tip) to activate the battery and clear any previous settings.

2. Setting Current Time:
   • Press and hold the TIME button.
   • While holding TIME, press HOUR to set the current hour (AM/PM will change automatically).
   • While holding TIME, press MIN to set the current minute.
   • While holding TIME, press WEEK to set the current day of the week.
   • Release the TIME button to save the settings.

Operation

1. Programming ON/OFF Times:

   The timer allows for up to 8 ON/OFF programs (P1 ON to P8 OFF).

   • Press the PROG button once. The display will show "P1 ON".
   • Press HOUR and MIN to set the desired ON time for Program 1.
   • Press WEEK repeatedly to select the day(s) for this program. Options include individual days, Mon-Fri, Sat-Sun, Mon-Sat, Mon-Sun, etc.
   • Press PROG again. The display will show "P1 OFF".
   • Press HOUR and MIN to set the desired OFF time for Program 1.
   • Press WEEK to select the day(s) for this OFF program (usually matching the ON program).
   • Repeat steps for P2 ON, P2 OFF, up to P8 ON, P8 OFF.
   • After setting all desired programs, press the TIME button to return to the current time display.
2. Manual ON/OFF Override:

   Press the ON/OFF AUTO button to cycle through the operating modes:

   • AUTO ON: The timer will follow programmed ON times.
   • ON: The connected device will remain ON, overriding all programs.
   • AUTO OFF: The timer will follow programmed OFF times.
   • OFF: The connected device will remain OFF, overriding all programs.

   For automatic operation, ensure the timer is set to either AUTO ON or AUTO OFF, depending on your desired starting state.
3. Vacation Mode:

   This feature randomly turns the connected device ON and OFF to simulate occupancy, enhancing security when you are away. Consult the full manual for specific activation steps, as this mode is typically accessed through a combination of buttons or a dedicated setting within the program menu.

Maintenance

• Cleaning: Wipe the timer with a soft, dry cloth. Do not use liquid cleaners or solvents.
• Battery: The built-in rechargeable battery is designed to maintain program settings. If the display becomes dim or programs are lost frequently, ensure the timer is plugged in for an extended period (several hours) to fully recharge the battery. The battery is not user-replaceable.

Troubleshooting

Specifications

Warranty and Support

For technical queries, replacement service, or warranty information, please contact the customer service department:

Customer Service: 800-730-3707

Please have your model number (31200) and purchase information ready when contacting support.