Eden 96093 Multi-Adjustable Flex Design Garden Sprinkler System User Manual

Introduction

The Eden Modular Above-Ground Rotor Sprinkler System offers flexibility, coverage, and convenience for your watering needs. This system is designed for easy installation without the need for specialized tools, allowing you to customize your garden or landscape watering layout.

Each rotor provides a 30 ft spray radius at 50 PSI, with an adjustable arc from 5° to 360°, ensuring thorough coverage. The modular design supports connecting up to three sets per water circuit, enabling the system to expand with your garden's requirements. Included height extension tubes help lift the spray above taller plants, while rubber-free aiming allows you to direct the water precisely without repositioning the base.

Package Contents

Your Eden 96093 Sprinkler System package includes the following components:

• Sprinkler heads with ground spikes (3 units)
• 5-inch riser extension tubes (3 units)
• Hose starter connection
• Hose extender/repair piece
• T-bracket connector
• 50 feet of green hose
• Bonus hose repair connector

Setup and Installation

The Eden Sprinkler System is designed for easy, tool-free setup. Follow these steps for optimal performance:

1. Prepare the Hose: Cut the green hose to your desired lengths using a PEX cutter or sharp scissors for a clean, straight cut. This ensures a secure, leak-free connection.
2. Attach Connectors:
   • For the main water source, attach the hose starter connection to one end of a hose segment. This is where your garden hose will screw into the system.
   • If needed, use the hose extender/repair piece to lengthen hoses or repair damaged sections.
   • Utilize the T-bracket connector to split a water circuit into two separate directions, allowing for broader coverage or different watering zones.
3. Connect Sprinkler Heads:
   • Slide the cap onto the cut end of a hose segment.
   • Insert the hose end into the port on the side of the sprinkler head.
   • Screw the cap onto the sprinkler head, compressing the hose to create a secure, watertight seal.
   • Repeat this process for all sprinkler heads you intend to use.
4. Position Sprinklers: Insert the ground spikes of the sprinkler heads firmly into the soil in your desired watering areas. You can use the 5-inch riser extension tubes to elevate the sprinkler heads, allowing them to spray over taller plants and shrubs.

Operation

Once installed, operating your Eden Sprinkler System is straightforward:

1. Turn on Water: Connect your main garden hose to the system's starter connection and turn on the water supply.
2. Adjust Spray: Each sprinkler head features three key adjustments:
   • On/Off Switch: A red lever allows you to individually turn each sprinkler head on or off.
   • Rotator: Below the sprinkler head, a rotator allows you to point the sprinkler in the desired direction.
   • Spray Adjuster: On top of the sprinkler head, the spray adjuster allows you to set the spray arc from 5° to a full 360°. This enables precise watering for specific areas, whether it's a narrow strip or a full circle.
3. Optimize Coverage: Adjust each sprinkler head to cover your specific lawn or garden areas. The system is highly adaptable for both small and awkward spaces, as well as larger areas up to 3,200 sq. ft. with multiple units.

Maintenance

Proper maintenance will ensure the longevity and optimal performance of your Eden Sprinkler System:

• Cleaning: When not in use, rinse the sprinkler components to remove dirt and debris.
• Storage: Drain the system and store all components indoors, away from freezing temperatures, to prevent damage.
• Hose Care: The included hose repair connector can be used to fix any accidental cuts or damage to your watering hoses, ensuring long-term usability.

Troubleshooting

Specifications

• Brand: Eden
• Model Number: 96093EDAMZ
• Color: Black, Red
• Material: Metal, Plastic (ABS plastic for durability)
• Style: Raised (with optional extension tubes)
• Item Dimensions (L x W x H): 9.84 x 3.14 x 3.54 inches
• Item Weight: 10.8 ounces
• Maximum Pressure: 50 PSI (Pound per Square Inch)
• Maximum Flow Rate: 4.8 Gallons Per Minute
• Inlet Connection Size: 0.5 Inches
• Coverage per Rotor: Up to 30 ft spray radius
• Adjustable Arc: 5° to 360°
• Total Coverage (3 rotors): Up to 3,200 sq. ft.
• Expandability: Up to 3 connected sets per water circuit

Warranty and Support

The Eden 96093 Multi-Adjustable Flex Design Garden Sprinkler System comes with a 2 Year Limited Warranty.

For warranty claims, technical support, or further inquiries, please refer to the official Eden website or contact their customer service department. Keep your purchase receipt as proof of purchase.

Important Note: Intended for outdoor use with cold water only. When not in use, rinse the tool to remove most of dirt, drain and store indoors away from freezing temperatures.

An Eden Garden Hose Model 94051EDAMZ is required for optimal use (Not Included).