3M PPS 2.0 Spray Gun Cup Disposable Lids

1. Product Overview

The 3M PPS 2.0 Spray Gun Cup Disposable Lids are an integral component of the 3M PPS 2.0 Spray Cup System. This system provides an all-in-one solution for efficiently measuring, mixing, filtering, and spraying various paint materials. These disposable lids are designed for single-use applications, ensuring a clean and consistent process for each job.

Each lid incorporates a full-diameter 200-micron filter, which is specifically engineered to maximize filtration and fluid flow, making it ideal for use with solvent-based paint coatings. The design includes a quarter-turn locking collar that facilitates secure attachment to standard or large PPS 2.0 paint cups, effectively preventing cross-threading and paint buildup during use.

Image 1.1: A single 3M PPS 2.0 Spray Gun Cup Disposable Lid, showcasing its clear dome and black quarter-turn locking collar.

2. Product Components

Each package of 3M PPS 2.0 Spray Gun Cup Disposable Lids (Model 26200) contains:

• 25 x 3M PPS 2.0 Spray Gun Cup Disposable Lids with integrated 200-micron filters.

Image 2.1: A gloved hand holding a 3M PPS 2.0 lid above a clear paint cup, illustrating the product packaging of 25 lids with 200-micron filters.

3. Setup and Compatibility

The 3M PPS 2.0 Disposable Lids are designed for seamless integration with the 3M PPS 2.0 Spray Cup System. Proper setup ensures optimal performance and prevents leaks or material waste.

3.1 Compatibility

These lids are compatible with:

• 3M PPS 2.0 Paint Cups (Standard and Large sizes)
• Disposable Liners (Standard and Large sizes)
• 3M PPS Type H/O Pressure Cup (26124), Large
• Most spray guns, when used with appropriate 3M PPS 2.0 Adapters (40+ adapters available for non-3M spray guns)
• A compressor that meets your spray gun's air flow requirements.

3.2 Installation Steps

1. Ensure you are using a compatible 3M PPS 2.0 paint cup and liner.
2. Place the disposable liner inside the paint cup.
3. Pour the desired paint material into the liner.
4. Align the 3M PPS 2.0 Disposable Lid with the paint cup. The quarter-turn locking collar on the lid is designed to prevent cross-threading.
5. Press the lid down firmly and rotate the quarter-turn locking collar until it clicks securely into place. This ensures a tight seal and prevents paint buildup around the connection.
6. Attach the assembled cup and lid to your spray gun using the appropriate PPS 2.0 adapter, if necessary.

Image 3.1: A close-up view of hands securing a 3M PPS 2.0 lid onto a paint cup, demonstrating the quarter-turn locking mechanism. This lid fits standard and large paint cups.

Image 3.2: A visual guide illustrating the various components and systems compatible with the 3M PPS 2.0 Disposable Lids, including paint cups, liners, adapters, and spray guns.

4. Operation and Applications

Once assembled, the 3M PPS 2.0 system with the disposable lid is ready for use. The integrated filter plays a crucial role in ensuring a smooth and high-quality finish.

4.1 Filtration Function

The full-diameter 200-micron filter built into each lid strains the paint material as it is drawn into the spray gun. This filtration process removes contaminants and particulates, preventing clogs in the spray gun and ensuring a consistent, high-quality spray pattern. The 200-micron filter is commonly used for solvent-based paint materials.

Image 4.1: A technician wearing protective gear operates a spray gun equipped with the 3M PPS 2.0 system, demonstrating how the lid's built-in 200-micron filter strains paint material for a smooth application.

4.2 Range of Applications

The 3M PPS 2.0 Spray Gun Cup Disposable Lids, as part of the PPS 2.0 system, are suitable for applying a wide variety of liquid coatings. These include, but are not limited to:

• Paints
• Stains
• Varnishes
• Basecoats
• Undercoats
• Primers
• Sealers
• Clearcoats
• Gelcoats
• Sprayable adhesives

The versatility of the system makes it applicable across numerous industries and projects, such as:

• Automotive (Cars, Trucks, Commercial Vehicles)
• Marine applications
• Furniture finishing
• Cabinetry
• Industrial coating
• Aerospace applications
• General home and arts & crafts projects

Image 4.2: An illustration depicting various applications for the 3M PPS 2.0 system, including cars, trucks, furniture, cabinetry, commercial vehicles, marine, industrial, and aerospace.

5. Maintenance and Disposal

As disposable components, the 3M PPS 2.0 Lids require minimal maintenance. Their design promotes efficiency and cleanliness in the painting process.

5.1 Post-Use Procedure

After completing a painting task:

1. Detach the assembled cup and lid from the spray gun.
2. Carefully remove the disposable lid from the paint cup.
3. Dispose of the used lid and liner according to local regulations for paint waste. The disposable nature of these components eliminates the need for extensive cleaning of the cup and lid, saving time and reducing solvent use.

5.2 Storage

Store unused lids in their original packaging in a cool, dry place, away from direct sunlight and extreme temperatures, to maintain their integrity and filtration properties.

6. Troubleshooting

While the 3M PPS 2.0 system is designed for reliability, minor issues can sometimes occur. Here are some common troubleshooting tips:

6.1 Paint Flow Issues (Clogging)

• Check Filter Compatibility: Ensure the 200-micron filter is appropriate for the viscosity and type of paint being used. While 200-micron is standard for solvent-based paints, some very thick or particle-laden materials might require a coarser filter (not applicable to this specific product, but general advice for PPS system).
• Proper Mixing: Ensure paint is thoroughly mixed and free of large clumps before pouring into the liner.
• Lid Seating: Verify the lid is securely seated and the quarter-turn collar is fully engaged. An improperly seated lid can affect vacuum and flow.

6.2 Leaks Around Lid

• Secure Attachment: Confirm the quarter-turn locking collar is fully rotated and locked into place.
• Inspect Lid and Cup: Check for any visible damage or deformities on the lid or the rim of the paint cup that could prevent a proper seal.
• Correct Size: Ensure you are using the correct lid size (standard/large) for your PPS 2.0 paint cup.

7. Specifications

8. Safety Information and Legal Disclaimer

Please read and understand all safety information before using this product.

8.1 General Safety

• Always wear appropriate personal protective equipment (PPE) when handling paint materials and operating spray equipment, including respirators, gloves, and eye protection.
• Ensure adequate ventilation in the work area.
• Follow all instructions and safety guidelines provided with your spray gun and paint materials.
• Dispose of used lids and paint waste according to all applicable local, state, and federal regulations.

8.2 Legal Disclaimer

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.

9. Warranty and Support

For information regarding product warranty, technical support, or any inquiries not covered in this manual, please contact 3M directly through their official website or customer service channels. As a disposable product, specific warranties may vary, but 3M stands behind the quality of its products.

Visit the official 3M website for the most current information and support resources: www.3M.com