Nerf N-Strike Raider Rapid Fire CS-35 Dart Blaster Instruction Manual

1. Product Overview

The Nerf N-Strike Raider Rapid Fire CS-35 is a high-capacity dart blaster designed for rapid firing. It features a unique drum magazine capable of holding 35 darts, providing extended play without frequent reloads. The blaster offers two firing modes: single-shot for precision and slam-fire for multi-shot action. An adjustable shoulder stock enhances user comfort and stability. This blaster is part of the N-Strike series, allowing for compatibility with various N-Strike accessories.

Image 1: The Nerf N-Strike Raider Rapid Fire CS-35 Dart Blaster, showcasing its blue and orange design, large drum magazine, and adjustable stock.

Key Features:

• High Capacity Drum Magazine: Holds 35 clip-system darts for extended play.
• Dual Firing Modes: Choose between single-shot for precision or slam-fire for rapid, multi-shot action.
• Adjustable Shoulder Stock: Provides comfort and stability, and can be removed.
• Tactical Rail: Allows for attachment of compatible N-Strike accessories.
• Jam Clearing Access: Convenient access point to clear any dart jams.

2. Setup and Assembly

Before using your Nerf N-Strike Raider Rapid Fire CS-35, ensure all components are present and properly assembled.

1. Attach Shoulder Stock: Align the shoulder stock with the attachment point at the rear of the blaster. Slide it firmly into place until it clicks. To adjust the length, press the release button on the stock and extend or retract it. To remove the stock, press the release button and pull it off.
2. Load Drum Magazine: Insert the 35 clip-system darts into the drum magazine. Ensure darts are fully seated.
3. Insert Drum Magazine: Align the loaded drum magazine with the magazine well on the side of the blaster. Push it firmly until it locks into place.

Image 2: The Nerf N-Strike Raider CS-35 blaster with its drum magazine and a pile of darts, illustrating the components included.

3. Operating Instructions

The Nerf N-Strike Raider CS-35 offers versatile firing options.

Single-Shot Mode:

1. Prime the Blaster: Pull the pump-action handle fully backward, then push it fully forward until it locks. This loads a dart into the firing chamber.
2. Fire: Aim the blaster and pull the trigger to fire a single dart.
3. Reload for Next Shot: To fire another dart, repeat step 1 (prime the blaster).

Slam-Fire Mode (Rapid Fire):

1. Prime the Blaster: Pull the pump-action handle fully backward, then push it fully forward.
2. Engage Slam-Fire: Hold down the trigger.
3. Rapid Fire: While holding the trigger, rapidly pump the handle backward and forward. The blaster will fire darts continuously as long as the trigger is held and the handle is pumped.

Magazine Release:

To remove the drum magazine, locate the magazine release button near the magazine well. Press this button and pull the magazine downwards to detach it.

4. Maintenance

Proper maintenance ensures the longevity and optimal performance of your blaster.

• Dart Care: Use only official Nerf darts. Inspect darts regularly for damage (tears, bends). Damaged darts can cause jams and reduce performance.
• Cleaning: Wipe the blaster with a dry or slightly damp cloth to remove dust and debris. Do not use harsh chemicals or immerse the blaster in water.
• Storage: Store the blaster and darts in a cool, dry place away from direct sunlight and extreme temperatures.

5. Troubleshooting

If you encounter issues with your blaster, refer to the following common solutions:

6. Specifications

Image 3: An illustration showing different types of Nerf blasters and darts, including the Raider CS-35, highlighting dart compatibility.

7. Warranty and Support

For warranty information or product support, please contact the manufacturer directly. Retain your proof of purchase for any warranty claims.

• Manufacturer: Hasbro
• Website: www.nerf.com (Please note: This link is for general brand information and may not lead directly to support for this specific model.)