1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Pyle-Pro PYD1919 4 Channel Professional Mixer. Designed for audio professionals and enthusiasts, this mixer offers comprehensive control over multiple audio sources, including turntables, line-level devices, and microphones, with advanced equalization and mixing capabilities.
Please read this manual thoroughly before using the device to ensure proper operation and to maximize its performance and longevity.
2. Safety Information
Always observe the following safety precautions to prevent electric shock, fire, or damage to the unit.
- Power Source: Connect the unit only to the power supply specified in this manual or on the unit itself. Ensure the voltage switch (115V/230V) is set correctly for your region.
- Ventilation: Do not block any ventilation openings. Ensure adequate airflow around the unit to prevent overheating.
- Water and Moisture: Do not expose the unit to rain or moisture. Do not place objects filled with liquids, such as vases, on the unit.
- Cleaning: Unplug the unit from the power outlet before cleaning. Use a dry cloth only.
- Servicing: Do not attempt to service this unit yourself. Refer all servicing to qualified service personnel.
- Placement: Place the unit on a stable, flat surface. Avoid placing it near heat sources or in direct sunlight.
- Cables: Protect power cords from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the unit.
3. Setup
Before connecting your Pyle-Pro PYD1919 mixer, ensure all audio equipment is powered off. This will prevent potential damage to your speakers or the mixer.
3.1 Product Overview
Figure 1: Top view of the Pyle-Pro PYD1919 4 Channel Professional Mixer. This image displays the main control surface, including the four input channels with illuminated faders, the 10-band graphic equalizers for left and right channels, microphone inputs, master and zone controls, and the assignable crossfader. The power button and BNC connector for a gooseneck lamp are also visible on the top right.
3.2 Connections
- Power Connection: Locate the power input on the rear of the mixer. Connect the provided power cable. Ensure the 115V/230V voltage switch is set to match your local power supply before plugging into a wall outlet.
- Main Output: Connect the Master Output (RCA or 1/4'' jacks) to your amplifier or powered speakers.
- Zone Output: The Zone Output can be used as a second output for a booth monitor or another listening area. Connect it to a separate amplifier or powered speaker system.
- Record Output: Connect the Record Output (RCA) to a recording device (e.g., cassette deck, digital recorder) to capture your mix.
- Input Sources:
- Turntable/Line Inputs: The mixer features 2 Turntable (Phono) inputs and 8 Line Level inputs (CD, Cassette Deck, Minidisc, etc.). Turntable inputs are convertible to accept Line Level Inputs. Connect your turntables to the PHONO inputs and other audio sources to the LINE inputs.
- Microphone Inputs: Connect your microphones to the two available mic inputs. MIC 1 features an XLR-1/4'' Combo Jack for versatile connectivity.
- Effects Loop: If using external effects processors, connect the Effects Send to the input of your effects unit and the Effects Receive to the output of your effects unit.
- Gooseneck Lamp: A top-mounted 12V BNC connector is available for an optional gooseneck lamp (not included) to illuminate the mixer's surface in low-light conditions.
4. Operating Instructions
This section details the functions of the Pyle-Pro PYD1919 mixer's controls.
4.1 Power On/Off
Press the Red Light Illuminated Power on/off Switch located on the top right of the mixer to turn the unit on or off. The switch will illuminate when the unit is powered on.
4.2 Input Channels (Channels 1-4)
- Independent Gain Controls: Each of the 4 input sources has an independent gain control knob. Adjust this to match the input level of your source device.
- Channel Volume Control: Each channel features a blue light illuminated channel volume fader. Use these faders to adjust the individual volume of each input source.
- Channel CUE Switch: Press the CUE switch for a channel to send its audio to the headphone output for pre-listening without affecting the main mix.
4.3 Equalizer
The mixer includes a 10-band Graphic Equalizer for both the Right and Left Channels. Use the sliders to boost or cut specific frequency bands to shape your sound. The Effect and EQ on/off Switches allow you to bypass the equalizer and effects loop when not needed.
4.4 Crossfader
The Assignable AB Crossfader allows for smooth transitions between two selected channels (A and B). Use the CHANNEL ASSIGN switches below each channel fader to assign it to either side A or B of the crossfader. The crossfader itself is a User Replaceable Dual Railed Crossfader.
4.5 Microphone Controls
- Dual Mic Inputs: The mixer supports two microphones.
- Talkover Function: The Talkover feature automatically ducks the music level when a microphone is used, making vocals clearer.
- Individual Rotary Controls and Kill Switches for Mic Bass, Mid-range and Treble: Fine-tune the tone of your microphone signals using these dedicated controls. Kill switches allow for instant removal of specific frequency bands.
4.6 Master and Zone Controls
- Master and Zone Channel Volume Controls: Adjust the overall output level of the main mix (Master) and the secondary output (Zone).
- Master and Zone Balance Controls: Adjust the left/right balance for both the Master and Zone outputs.
- Stereo/Mono Switches: Select between stereo and mono output for the Master and Zone channels.
4.7 Headphone Monitoring
- Headphone Level Control: Adjust the volume of the headphone output.
- Headphone CUE/PGM Control: Blend between the CUE (pre-listened) signal and the PGM (program/main mix) signal in your headphones.
4.8 Level Display Meters
The Blue LED Level Display Meters provide visual feedback on the output level of your mix, helping you prevent clipping and ensure optimal signal strength.
5. Maintenance
Proper maintenance ensures the longevity and optimal performance of your Pyle-Pro PYD1919 mixer.
- Cleaning: Regularly wipe the surface of the mixer with a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or solvents, as these may damage the finish or internal components.
- Dust: Keep the unit free from dust. Use a soft brush or compressed air to clean around faders, knobs, and ventilation openings.
- Storage: When not in use for extended periods, store the mixer in a cool, dry place, away from direct sunlight and extreme temperatures. Consider covering it to protect against dust.
- Fader Maintenance: The crossfader is user-replaceable. If faders become stiff or noisy over time, specialized fader lubricant or replacement may be required. Consult a qualified technician if unsure.
6. Troubleshooting
If you encounter issues with your Pyle-Pro PYD1919 mixer, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable not connected; Power switch off; Incorrect voltage setting; Blown fuse. | Ensure power cable is securely connected. Press the power switch. Verify 115V/230V switch setting. Check and replace fuse if necessary (consult technician). |
| No sound output | Master/Zone volume low; Incorrect input/output connections; Amplifier/speakers off or muted; Channel faders down; Gain too low. | Increase Master/Zone volume. Check all audio cable connections. Ensure amplifier/speakers are on and unmuted. Raise channel faders. Adjust input gain controls. |
| Distorted sound | Input gain too high (clipping); Output level too high; Faulty cables. | Reduce input gain until LED meters no longer peak. Lower Master/Zone volume. Try different audio cables. |
| Microphone not working or distorted | Mic volume low; Mic gain low; Incorrect mic connection; Mic EQ settings. | Increase mic volume. Adjust mic gain. Ensure mic is connected to the correct input (XLR or 1/4"). Adjust mic Bass, Mid-range, and Treble controls. |
| Crossfader not working | Channels not assigned to A/B; Faulty crossfader. | Ensure channels are correctly assigned to A or B using the CHANNEL ASSIGN switches. If issue persists, the crossfader may need replacement. |
If the problem persists after trying these solutions, please contact customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | PYD1919 |
| Channels | 4 |
| Inputs | 2 Turntable / 8 Line Level / 2 Mic Inputs (MIC 1: XLR-1/4'' Combo Jack) |
| Equalizer | 10-band Graphic Equalizer for Right and Left Channels |
| Crossfader | Assignable AB Crossfader, User Replaceable Dual Railed |
| Mic Controls | Talkover, Individual Rotary Controls and Kill Switches for Mic Bass, Mid-range and Treble |
| Outputs | Master, Zone, Record, Amp Output (1/4'' and RCA Jacks) |
| Voltage | 115/230 Voltage Switchable |
| Dimensions (WxDxH) | 19'' x 9 7/16'' x 4 1/4'' (approx. 48.26 x 23.97 x 10.8 cm) |
| Item Weight | 4.08 kg |
| Manufacturer | Sound Around |
8. Warranty and Support
Warranty Information: Pyle products are designed and manufactured to the highest quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Pyle website. Keep your purchase receipt as proof of purchase for warranty claims.
Customer Support: If you have any questions, require technical assistance, or need to arrange for service, please contact Pyle customer support. Contact information can typically be found on the official Pyle website (www.pyleusa.com) or in the product packaging.
When contacting support, please have your product model number (PYD1919) and purchase date ready.
