Introduction
Welcome to the instruction manual for your Westclox Retro Wood Style Digital Alarm Clock, Model 22690. This clock combines a classic aesthetic with modern functionality, offering an easy-to-read display and essential alarm features. Please read this manual carefully to ensure proper setup and operation of your new alarm clock.

Image: Front view of the Westclox Retro Wood Style Digital Alarm Clock, displaying 12:08 in red LED.
Product Features
- Easy to Read Digital Red LED Display: Clear and bright time display.
- Ascending Alarm with 9 Minute Snooze: Alarm volume gradually increases, with a convenient snooze function.
- Simple & Easy to Use Controls: Intuitive buttons for setting time and alarm.
- Electric Operated with Battery Backup: Ensures timekeeping during power outages.
- Battery Backup Requires 1 AA Battery (not included): For maintaining settings during power interruptions.
Setup
- Power Connection:
Connect the AC power cord to a standard electrical outlet. The LED display will illuminate.

Image: Angled view of the alarm clock, highlighting the power connection.
- Battery Backup Installation:
For uninterrupted timekeeping during power outages, install one (1) AA battery (not included) into the battery compartment located on the bottom of the unit. This battery maintains time settings but does not power the display or alarm during an outage.
- Setting Current Time:
Locate the 'TIME', 'HOUR', and 'MINUTE' buttons on the top of the clock.

Image: Top view of the alarm clock's control buttons.
- Press and hold the 'TIME' button.
- While holding 'TIME', press 'HOUR' repeatedly to adjust the hour.
- Continue holding 'TIME', and press 'MINUTE' repeatedly to adjust the minute.
- Observe the 'PM' indicator on the display to ensure correct AM/PM setting.
- Release the 'TIME' button when the correct time is set.
Operating Instructions
- Setting the Alarm Time:
Locate the 'ALARM', 'HOUR', and 'MINUTE' buttons on the top of the clock.
- Press and hold the 'ALARM' button.
- While holding 'ALARM', press 'HOUR' repeatedly to adjust the alarm hour.
- Continue holding 'ALARM', and press 'MINUTE' repeatedly to adjust the alarm minute.
- Ensure the 'PM' indicator is correct for your desired alarm time.
- Release the 'ALARM' button when the desired alarm time is set.
- Activating/Deactivating the Alarm:
Locate the 'ON-OFF' slide switch on the top right of the clock.
- Slide the switch to 'ON' to activate the alarm. An alarm indicator light will appear on the display.
- Slide the switch to 'OFF' to deactivate the alarm. The alarm indicator light will turn off.
- Using the Snooze Function:
When the alarm sounds, press the large 'SNOOZE' button located on the top center of the clock. The alarm will pause for approximately 9 minutes before sounding again.
- Ascending Alarm Feature:
The alarm is designed to start at a low volume and gradually increase in intensity, providing a gentle wake-up experience that becomes more insistent if not turned off or snoozed.
Maintenance
To keep your Westclox alarm clock in optimal condition, follow these simple maintenance guidelines:
- Cleaning: Wipe the clock with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and electronic components.
- Battery Replacement: Replace the AA battery annually to ensure reliable backup power for your time settings.
- Placement: Place the clock on a stable, flat surface away from direct sunlight, excessive heat, or moisture.
Troubleshooting
- No Display or Power:
- Ensure the AC power cord is securely plugged into a live electrical outlet.
- Check if the battery backup is correctly installed. Note: The battery backup only maintains time settings during a power outage; it does not power the display or alarm.
- Alarm Does Not Sound:
- Verify that the alarm time is set correctly.
- Ensure the 'ON-OFF' switch for the alarm is in the 'ON' position. The alarm indicator light should be visible on the display.
- Double-check the AM/PM setting for the alarm time.
- Display is Too Bright:
- This Westclox model features a 'Super Bright' LED display for enhanced readability. Please note that there is no adjustable dimmer function on this unit.
Specifications
| Brand | Westclox |
| Model Number | 22690 |
| Color | Woodgrain |
| Display Type | Digital Red LED |
| Special Features | Ascending Alarm, 9-Minute Snooze |
| Product Dimensions | 4.8"W x 1.5"H |
| Power Source | Corded Electric |
| Battery Backup | 1 AA battery (not included) |
| Material | Plastic (Woodgrain finish) |
| Item Weight | 9.6 ounces |

Image: Dimensions of the Westclox alarm clock.
Westclox Brand Information
Learn more about the heritage and quality behind your Westclox product.
Video: A brief overview of the Westclox brand history and significance, provided by NYL Holdings.
Warranty and Support
For detailed warranty information, product registration, or customer support, please refer to the documentation included in your product packaging. You may also visit the official Westclox website for further assistance.





