Vicks V1900BX

Vicks Waterless Menthol Vaporizer User Manual

Model: V1900BX

Brand: Vicks

1. Introduction

The Vicks Waterless Menthol Vaporizer (Model V1900BX) provides soothing menthol vapors without the need for water, offering a convenient and mess-free solution for temporary relief from cold and congestion symptoms. Its compact design and silent operation make it ideal for bedside use, enhancing comfort during rest.

Key Features:

  • Waterless operation: Eliminates spills and refilling.
  • Silent operation: Ensures undisturbed rest.
  • Compact design: Perfect for bedside tables or small spaces.
  • Soothing nightlight: Provides a gentle glow.
  • Adjustable vapor strength: Features 3 settings for personalized comfort.
  • Uses Vicks VapoPads: Each pad provides up to 8 hours of menthol vapors.

2. Package Contents

  • 1 x Vicks Waterless Menthol Vaporizer (Model V1900BX)
  • 5 x Vicks Menthol VapoPads

3. Product Overview

Vicks Waterless Menthol Vaporizer

Figure 1: Vicks Waterless Menthol Vaporizer, a compact device designed for easy use.

Open Vicks Vaporizer with VapoPad inserted

Figure 2: The vaporizer with its lid open, showing the slot for inserting a VapoPad. A green indicator light is visible when the device is powered on.

Vicks Waterless Vaporizer on a bedside table

Figure 3: The Vicks Waterless Vaporizer positioned on a bedside table, demonstrating its compact size and suitability for personal use.

4. Setup

  1. Unpack: Carefully remove the vaporizer and VapoPads from the packaging.
  2. Open Lid: Gently lift the top cover of the vaporizer to reveal the VapoPad slot.
  3. Insert VapoPad: Open one Vicks VapoPad packet and slide the pad into the designated slot. Ensure it sits flat.
  4. Close Lid: Close the top cover securely.
  5. Position: Place the vaporizer on a flat, stable surface, such as a bedside table, away from direct sunlight or heat sources.
  6. Plug In: Insert the power cord into a standard electrical outlet. The green indicator light will illuminate, signifying the device is powered on and beginning to heat the VapoPad.

5. Operating Instructions

  1. Power On/Off: The vaporizer does not have a dedicated on/off switch. To turn it on, plug the power cord into an electrical outlet. To turn it off, unplug the device from the outlet.
  2. Adjust Vapor Strength: The vaporizer features a slider switch on the side with three settings (I, II, III) to adjust the menthol vapor intensity. Slide the switch to your desired level of vapor release.
  3. Nightlight Function: The green indicator light serves as a soothing nightlight when the device is powered on.
  4. Vapor Release: Once powered on, the device will begin to heat the VapoPad, releasing soothing menthol vapors into the air.

6. Maintenance

  1. Replacing VapoPads: Each VapoPad provides up to 8 hours of soothing menthol vapors. When the scent diminishes, or after approximately 8 hours of use, replace the old pad with a new one. To replace, unplug the device, open the lid, remove the used pad, insert a new one, and close the lid.
  2. Cleaning: To clean the exterior of the vaporizer, wipe it with a soft, damp cloth. Ensure the device is unplugged before cleaning.
Variety of Vicks VapoPads refills

Figure 4: Various types of Vicks VapoPads refills, including menthol, sleepy time comfort, and calming lavender vapors, compatible with the vaporizer.

7. Safety Information

  • CAUTION: Hot Surface. The heating element inside the vaporizer can become hot during operation. Avoid touching the internal components when the device is plugged in or recently unplugged.
  • DO NOT IMMERSE IN WATER. This device is waterless and should never be submerged in water or any other liquid.
  • Keep out of reach of children and pets.
  • Use only Vicks VapoPads with this device.
  • Do not block the vapor outlet.
  • Unplug the device when not in use or before cleaning.

8. Troubleshooting

  • No Vapor/Weak Scent:
    • Ensure the device is properly plugged into a working electrical outlet and the green light is on.
    • Check if the VapoPad is correctly inserted.
    • Replace the VapoPad if it has been used for more than 8 hours or if the scent has diminished.
    • Adjust the vapor strength setting to a higher level (II or III).
  • Nightlight is Too Bright:
    • The nightlight intensity is not adjustable. Consider repositioning the vaporizer if the light is disruptive.
  • Device Not Turning On:
    • Verify that the power cord is securely plugged into both the device and the electrical outlet.
    • Test the outlet with another appliance to ensure it is functional.

9. Specifications

FeatureDetail
Model NumberV1900BX
BrandVicks
Dimensions (L x W x H)5.25 x 5.25 x 2 inches
Item Weight0.01 Ounces
Power SourceCorded Electric
Vapor TypeMenthol (Waterless)
Vapor Pad DurationUp to 8 hours per pad
Vapor Strength Settings3 (I, II, III)

10. Warranty & Support

The Vicks Waterless Menthol Vaporizer (Model V1900BX) comes with a 1-year limited warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please visit the official Vicks website or contact their customer service department. Contact details can typically be found on the product packaging or the manufacturer's website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.