Introduction
The Logitech Pure-Fi Express Plus is an omnidirectional speaker dock designed for iPod and iPhone devices. It delivers rich, room-filling sound and offers convenient features such as an integrated clock with alarm, a wireless remote control, and the flexibility of AC or battery power. This manual provides essential information for setting up, operating, and maintaining your speaker dock.
Key Features:
- Supports iPhone and all iPod models with a dock connector.
- Auxiliary input for other portable music players (3.5-mm).
- Omnidirectional acoustic technology for consistent sound throughout a room.
- Operates on AC power or batteries for portability.
- Integrated carrying handle.
- Clock with alarm function.
- Wireless remote control with integrated storage.
Setup
1. Unpacking and Placement
Carefully remove all components from the packaging. Place the speaker dock on a stable, flat surface. For optimal sound distribution, consider a central location in the room due to its omnidirectional design.
Figure 1: Front view of the Logitech Pure-Fi Express Plus speaker dock with an iPod docked.
2. Power Connection
Connect the provided AC power adapter to the 'DC IN' port on the back of the speaker dock and then plug it into a wall outlet. Alternatively, for portable use, insert 6 AA batteries (not included) into the battery compartment located on the underside of the unit.
Figure 2: Rear view of the speaker dock, highlighting the power and auxiliary input ports.
3. Docking Your Device
Select the appropriate Universal Dock adapter tray for your specific iPod or iPhone model. Insert the tray into the docking well. Gently place your iPod or iPhone onto the dock connector. The device will begin charging if the speaker dock is connected to AC power.
Figure 3: Top view of the docking area with an adapter tray.
4. Auxiliary Input
For other portable music players, connect a 3.5-mm audio cable (not included) from your device's headphone jack to the 'AUX IN' port on the back of the speaker dock.
Operating Instructions
1. Power On/Off and Volume Control
Press the power button on the front panel or the remote control to turn the unit on or off. Rotate the large central knob on the front panel or use the '+' and '-' buttons on the remote to adjust the volume.
Figure 4: Close-up of the control panel and remote control.
2. Playing Music
Once your iPod or iPhone is docked, it should automatically begin playing. If not, use the play/pause button on the remote or your device. For auxiliary input, ensure your external device is playing and select the auxiliary input source on the speaker dock if available (refer to the display or remote for source selection options).
3. Using the Remote Control
The wireless remote control allows you to manage playback, volume, and alarm settings from a distance of up to 10 meters (30 feet). The remote stores neatly in a compartment on the back of the speaker dock.
4. Setting the Clock and Alarm
Refer to the buttons below the LED display for 'CLOCK SET', 'ALARM ON/OFF', and 'ALARM VIEW/SET'. Follow the on-screen prompts to set the current time and configure your alarm preferences.
5. Product Demonstration Video
This video demonstrates the key features and usage of the Logitech Pure-Fi Express Plus speaker dock, including docking an iPod/iPhone, using the remote, and highlighting its omnidirectional sound.
Maintenance
1. Cleaning
To clean the speaker dock, use a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these may damage the finish or internal components. Ensure the device is powered off and unplugged before cleaning.
2. Battery Replacement
If using batteries, replace them when the low battery indicator appears or when audio quality diminishes. Open the battery compartment on the underside of the unit, remove old batteries, and insert new AA batteries, observing correct polarity.
Troubleshooting
- No Power:
Ensure the AC adapter is securely connected to both the speaker dock and a working power outlet. If using batteries, check that they are correctly inserted and not depleted. - No Sound:
Verify that your iPod/iPhone is properly docked or the auxiliary device is connected and playing. Check the volume level on both the speaker dock and your connected device. Ensure the speaker dock is not muted. - Device Not Charging:
Confirm the speaker dock is connected to AC power. Ensure your iPod/iPhone is correctly seated in the dock connector. - Remote Control Not Working:
Check the battery in the remote control and replace if necessary. Ensure there are no obstructions between the remote and the speaker dock's infrared receiver. - Distorted Sound:
Reduce the volume on both the speaker dock and your connected device. Ensure the audio cable for auxiliary input is fully inserted and not damaged.
Specifications
| Product Dimensions | 16.5 x 5 x 5.5 inches |
| Item Weight | 4.3 pounds |
| Manufacturer | Logitech, Inc |
| Model Number | 980-000187 |
| Compatible Devices | iPod, iPhone, other portable music players (via 3.5mm auxiliary input) |
| Hardware Interface | 3.5mm Audio |
| Color | Black |
| UPC | 763615786508, 033171390533, 978550546920, 097855054692 |
Warranty and Support
Warranty Information
The Logitech Pure-Fi Express Plus speaker dock comes with a 2-year limited hardware warranty. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the warranty documentation included with your product or visit the official Logitech website.
Customer Support
For further assistance, technical support, or to access additional resources, please visit the official Logitech support website or contact their customer service department. Contact information can typically be found on the Logitech website or in the product packaging.
Legal Disclaimer
DISCLAIMER: All items come as is! We do not offer returns on items that come as is. That being said this item does function as it was made for.
