Introduction
This manual provides comprehensive instructions for the safe and effective use of your WAC Lighting DLC-4-WT Picture Light Framing Clamp. This clamp is designed to securely attach WAC Lighting DL clamp mount display lights to various surfaces, ensuring stable illumination for your artwork or displays. Please read this manual thoroughly before installation and operation.
Product Overview
The WAC Lighting DLC-4-WT is a durable framing clamp, finished in white, designed for use with compatible WAC Lighting display lights. It features a robust clamping mechanism suitable for flat surfaces.
Figure 1: WAC Lighting DLC-4-WT Picture Light Framing Clamp. This image shows the white clamp with its metal screw mechanism for securing to a surface.
Key Features:
- Compatible with WAC Lighting DL clamp mount display lights (models dl-007, dl-150, dl-188, dl-214).
- Designed for flat surfaces ranging from 2 inches to 4 inches in width.
- Features a secure clamp lock mechanism.
- White finish.
Setup and Installation
- Identify Compatible Light: Ensure you are using a compatible WAC Lighting DL clamp mount display light (e.g., dl-007, dl-150, dl-188, dl-214).
- Select Mounting Surface: Choose a flat surface for mounting that is between 2 and 4 inches wide. Ensure the surface is stable and can support the weight of the clamp and the attached light fixture.
- Attach Clamp to Light: Securely attach the DLC-4-WT framing clamp to your WAC Lighting display light according to the light fixture's specific instructions.
- Position Clamp: Place the clamp onto the desired flat surface.
- Secure Clamp: Turn the clamp lock mechanism clockwise to tighten the clamp onto the surface. Continue turning until the clamp is firmly secured and the light fixture is stable. Do not overtighten.
- Verify Stability: Gently test the stability of the installed light fixture to ensure it is securely held in place.
Important Safety Note: This product is UL & cUL listed for damp locations. Ensure the installation environment is appropriate for both the clamp and the attached light fixture.
Operating Instructions
Once the WAC Lighting DLC-4-WT clamp is securely installed with a compatible display light, operation primarily involves adjusting the light fixture itself. The clamp's function is to provide a stable mounting point.
- Light Adjustment: Refer to the instruction manual of your specific WAC Lighting display light for details on adjusting its position or angle.
- Repositioning: To reposition the clamp and light, carefully loosen the clamp lock mechanism by turning it counter-clockwise. Move the assembly to the new desired location and re-secure the clamp as described in the "Setup and Installation" section.
Maintenance
The WAC Lighting DLC-4-WT clamp requires minimal maintenance to ensure its longevity and proper function.
- Cleaning: Wipe the clamp with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners or solvents, as these can damage the finish.
- Inspection: Periodically check the clamp mechanism for any signs of wear or damage. Ensure the screw threads are clean and move freely.
- Tightness: Occasionally verify that the clamp remains securely tightened to its mounting surface.
Troubleshooting
If you encounter issues with your WAC Lighting DLC-4-WT clamp, consider the following common solutions:
- Clamp is not secure:
- Ensure the mounting surface is within the 2-4 inch width range.
- Verify that the clamp lock mechanism is fully tightened.
- Check for any obstructions preventing the clamp from closing properly.
- Difficulty tightening/loosening the clamp:
- Inspect the screw threads for dirt or damage. Clean if necessary.
- Do not force the mechanism. If it's jammed, contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | DLC-4-WT |
| Brand | WAC Lighting |
| Color | White |
| Dimensions (L x W x H) | 1.31 x 1.31 x 4 inches |
| Item Weight | 1 Pound |
| Mounting Type | Clamp Mount, Surface |
| Surface Compatibility | Flat surfaces from 2" to 4" wide |
| Certifications | UL, cUL Listed for Damp Locations |
| UPC | 790576015170 |
Warranty Information
This WAC Lighting DLC-4-WT Picture Light Framing Clamp is covered by a Five (5) year manufacturer limited warranty. For detailed terms and conditions, please refer to the official WAC Lighting warranty documentation or contact WAC Lighting customer support.
Support and Contact
For further assistance, technical support, or warranty claims, please contact WAC Lighting directly:
- Manufacturer: WAC Lighting
- Website: www.waclighting.com
- Refer to the packaging or official WAC Lighting website for the most current contact information.
