1. Introduction
This manual provides essential information for the proper installation, maintenance, and care of your Mustang Tripper Solo Seat, model 76584. The Tripper Solo seat is designed for Harley-Davidson Dyna models from 1991 to 2005, offering a sleek, low-profile design while maintaining rider comfort. It features detailed stitch work and a durable, premium vinyl cover. For optimal performance and longevity, please read this manual thoroughly before installation and retain it for future reference.
2. Safety Information
Always prioritize safety when working on your motorcycle. Improper installation or maintenance of motorcycle components can lead to serious injury or damage. If you are unsure about any step, consult a qualified motorcycle mechanic.
- Ensure the motorcycle is stable and securely supported on a level surface before beginning any work.
- Turn off the engine and remove the key to prevent accidental starting.
- Wear appropriate personal protective equipment, such as gloves and eye protection.
- Do not overtighten fasteners, as this can strip threads or damage components. Refer to your motorcycle's service manual for specific torque specifications.
- After installation, always check that the seat is securely fastened and does not wobble or shift during operation.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Handle with care and wash hands after handling.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- 1 x Mustang Tripper Solo Seat (Model 76584)
- Necessary mounting hardware (may vary by application, typically includes bolts, washers, and nuts if not reusing existing hardware).
Figure 3.1: Mustang Tripper Solo Seat (front) and optional matching passenger pad (rear). Note: Passenger pad is sold separately.
4. Installation Instructions
This section outlines the general steps for installing your new Mustang Tripper Solo Seat. Specific procedures may vary slightly depending on your motorcycle's year and model. Always refer to your Harley-Davidson service manual for detailed instructions regarding seat removal and installation for your specific Dyna model.
Tools Required (Typical):
- Wrenches or sockets (sizes may vary)
- Screwdriver (Phillips or flathead, depending on existing fasteners)
- Torque wrench (recommended for proper fastener tightening)
Procedure:
- Prepare the Motorcycle: Park your motorcycle on a firm, level surface. Ensure the engine is off and the ignition key is removed.
- Remove Existing Seat:
- Locate the seat mounting bolt(s) at the rear fender. This is typically a single bolt.
- Unscrew and remove the bolt(s).
- Lift the rear of the seat and slide it backward to disengage the front tongue from the frame mounting tab. Carefully remove the old seat.
- Inspect Mounting Area: Clean any debris from the frame and fender mounting points. Inspect the frame tab for any damage or wear.
- Install New Solo Seat:
- Align the front tongue of the Mustang Tripper Solo Seat with the frame mounting tab. Slide the seat forward until the tongue is fully engaged.
- Press down firmly on the rear of the seat to align the rear mounting hole with the fender mounting hole.
- Insert the seat mounting bolt (either the original or new hardware provided) through the seat's mounting bracket and into the fender.
- Hand-tighten the bolt initially, then use a wrench or socket to tighten it securely. Do not overtighten. Refer to your motorcycle's service manual for specific torque values.
- Verify Security: After tightening, gently attempt to lift and shift the seat to ensure it is firmly secured to the motorcycle frame and fender. The seat should not have any noticeable play.
Figure 4.1: Example of a Mustang Tripper Solo Seat properly installed on a motorcycle.
5. Maintenance and Care
Proper care will extend the life and maintain the appearance of your Mustang Tripper Solo Seat.
- Cleaning: Clean the vinyl surface regularly with a mild soap and water solution. Use a soft cloth or sponge. Avoid harsh chemicals, abrasive cleaners, or petroleum-based products, as these can damage the vinyl. Rinse thoroughly with clean water and dry with a soft, clean cloth.
- Conditioning: Periodically apply a vinyl conditioner designed for automotive or motorcycle upholstery to keep the material supple and prevent cracking. Follow the conditioner manufacturer's instructions.
- Inspection: Regularly inspect the seat for any signs of wear, tears, or loose stitching. Check the mounting hardware for tightness, especially after long rides or off-road use. Retighten if necessary.
- Storage: If storing your motorcycle for an extended period, especially outdoors, consider covering the seat to protect it from prolonged exposure to direct sunlight and harsh weather conditions.
6. Troubleshooting
This section addresses common issues you might encounter with your seat.
| Problem | Possible Cause | Solution |
|---|---|---|
| Seat feels loose or wobbly after installation. | Mounting bolt not tightened sufficiently; front tongue not fully engaged. | Ensure the front tongue is correctly seated in the frame tab. Tighten the rear mounting bolt securely, referring to your motorcycle's service manual for torque specifications. |
| Difficulty aligning rear mounting hole. | Front tongue not fully engaged or seat not pushed down firmly enough. | Re-check the engagement of the front tongue. Apply firm, even pressure to the rear of the seat to compress the foam and align the hole. |
| Seat appears uneven or not flush with the tank/fender. | Improper seating of the front tongue or rear mounting. | Remove the seat and re-install, ensuring all mounting points are correctly aligned and engaged before tightening the bolt. |
7. Specifications
Key specifications for the Mustang Tripper Solo Seat (Model 76584).
- Model: 76584
- Brand: Mustang
- Color: Black
- Material: Faux Leather
- Vehicle Service Type: Motorcycle (Harley-Davidson Dyna 1991-2005)
- Item Weight: Approximately 8.15 pounds (3.7 kg)
- Product Dimensions: Approximately 15 x 20 x 10 inches (L x W x H)
- UPC: 191209504991
8. Warranty and Support
Mustang stands behind the quality of its products. For specific warranty information regarding your Tripper Solo Seat, please refer to the warranty documentation included with your purchase or visit the official Mustang website. For technical support, installation assistance, or to inquire about replacement parts, please contact Mustang customer service directly.
Mustang Customer Service:
- Website: www.mustangseats.com
- Refer to your purchase receipt or product packaging for the most current contact information.
