Bissell Pet Eraser Corded Hand Vac (Model 33A1) Instruction Manual

Introduction

The Bissell Pet Eraser Corded Hand Vac, Model 33A1, is designed for efficient pet hair and dry mess pick-up around your home. Its lightweight and compact design, combined with powerful suction, makes it an ideal tool for quick cleanups on various surfaces, including upholstery, stairs, and hard floors.

Setup

1. Unpacking: Carefully remove all components from the packaging. Ensure all parts listed in the packaging contents are present.
2. Nozzle Attachment: The hand vac comes with two specialized nozzles. To attach a nozzle, align it with the vacuum's intake and snap it firmly into place. To switch nozzles, press down on the round nozzle-release button and attach the desired nozzle.
• Flexible Rubber Contour Nozzle: Ideal for attracting and removing pet hair and dirt from upholstery and stairs.
• Hard Nozzle: Suitable for cleaning dry messes on various surfaces, including inside automobiles.
3. Power Connection: Extend the 16-foot power cord and plug it into a suitable electrical outlet.

Operating Instructions

1. Power On/Off: Locate the fingertip-access on/off switch on the handle. Press the switch to turn the vacuum on or off.
2. Cleaning Surfaces:
• For Pet Hair and Upholstery: Attach the flexible rubber contour nozzle. Gently pull the nozzle across the surface to attract and lift pet hair and embedded dirt.
• For Dry Messes: Attach the hard nozzle. Move the nozzle over the dry debris to vacuum it up.
3. Optimal Performance: For maximum suction, ensure the dirt container is not overfilled and the filters are clean.

Maintenance

1. Emptying the Dirt Container: To maintain optimal suction performance, empty the dirt container after each use. Follow the instructions in your user manual for specific steps on detaching and emptying the container.
2. Cleaning Filters: The vacuum features a pleated post motor filter and a filter screen. Regularly check and clean these filters to ensure efficient operation. Refer to the user manual for detailed cleaning instructions.

Troubleshooting

• Loss of Suction: Check if the dirt container is full and needs emptying. Inspect the filters for clogs or excessive dirt buildup and clean them as per maintenance instructions. Ensure no blockages are present in the nozzle or hose.
• Vacuum Not Turning On: Verify that the power cord is securely plugged into a functional electrical outlet. Check the on/off switch for proper engagement.
• Unusual Noise: Turn off and unplug the vacuum immediately. Inspect the nozzles and intake for any foreign objects that might be causing the noise or obstruction.

Specifications

Warranty & Support

This Bissell Pet Eraser Corded Hand Vac (Model 33A1) comes with a 1-year limited warranty. For warranty claims, technical support, or replacement parts, please refer to the contact information provided in your product packaging or visit the official Bissell website.