Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your RCA DTA-800B1 Digital To Analog Pass-through TV Converter Box. This device allows older analog televisions to receive over-the-air digital television broadcasts. Please read this manual thoroughly before using the product to ensure proper functionality and safety.
Safety Information
- Ensure the converter box is placed on a stable, flat surface to prevent accidental falls.
- Do not expose the unit to moisture, rain, or extreme temperatures.
- Avoid blocking ventilation openings to prevent overheating.
- Only use the power adapter supplied with the unit.
- Do not attempt to open or repair the unit yourself. Refer all servicing to qualified personnel.
- Keep the remote control batteries away from children.
Package Contents
Verify that all items are present in the package:
- RCA DTA-800B1 Digital To Analog Pass-through TV Converter Box
- Remote Control
- Power Adapter
- Coaxial Cable (for TV connection)
- User Manual (this document)
Image: The RCA DTA-800B1 Digital TV Converter Box shown in its retail packaging, highlighting the product and its features.
Product Overview
The RCA DTA-800B1 is designed to convert digital broadcast signals for display on analog televisions. It features a compact design and essential ports for connectivity.
Image: Front view of the RCA DTA-800B1 Digital TV Converter Box, showing the power button, channel up/down buttons, and IR receiver.
Front Panel Controls:
- IR Sensor: Receives signals from the remote control.
- CH- / CH+ Buttons: Changes channels.
- ON/STANDBY Button: Powers the unit on or off.
Rear Panel Connections:
- ANT IN: Connect your antenna here.
- TO TV (Coaxial Out): Connects to your TV's antenna input.
- AUDIO/VIDEO OUT (RCA): Connects to your TV's composite video and stereo audio inputs (Red/White/Yellow).
- CH3/CH4 Switch: Selects the output channel (3 or 4) for coaxial connection.
- DC IN: Connect the power adapter here.
Setup
1. Connecting the Converter Box
- Connect Antenna: Connect your outdoor or indoor antenna to the ANT IN port on the back of the converter box.
- Connect to TV (Coaxial):
- Use the supplied coaxial cable to connect the TO TV (Coaxial Out) port on the converter box to the ANTENNA IN or RF IN port on your analog television.
- Set the CH3/CH4 switch on the back of the converter box to either channel 3 or 4. Tune your television to the corresponding channel (3 or 4).
- Connect to TV (RCA/Composite - Optional):
- If your TV has RCA (Red/White/Yellow) inputs, you can use these for a potentially better picture quality. Connect the AUDIO/VIDEO OUT ports on the converter box to the corresponding AUDIO/VIDEO IN ports on your TV.
- Select the correct input source (e.g., Video 1, AV, Input) on your TV using its remote control.
- Connect Power: Plug the power adapter into the DC IN port on the converter box, then plug the adapter into a standard electrical outlet.
- Insert Remote Batteries: Open the battery compartment on the remote control and insert two AAA batteries (not included).
2. Initial Channel Scan
After connecting the converter box, you must perform a channel scan to find available digital broadcasts.
- Turn on your television and the RCA DTA-800B1 converter box.
- Ensure your TV is tuned to the correct input (Channel 3/4 for coaxial, or AV input for RCA).
- Using the converter box remote, navigate to the MENU.
- Select CHANNEL SETUP or AUTO SCAN.
- Initiate the scan. The converter box will search for all available digital channels in your area. This process may take several minutes.
- Once the scan is complete, the converter box will save the channels, and you should be able to view digital broadcasts.
Operating Instructions
Basic Functions:
- Power On/Off: Press the ON/STANDBY button on the front panel or the remote control.
- Channel Selection: Use the CH+ or CH- buttons on the unit or remote to change channels. You can also enter channel numbers directly using the remote's number pad.
- Volume Control: Use the VOL+ or VOL- buttons on the remote control. Note that the converter box controls its own audio output; your TV's volume may also need adjustment.
- Menu Navigation: Use the MENU button to access settings. Use arrow keys and OK/ENTER to navigate and select options.
- Information Display: Press the INFO button on the remote to display current channel information (if available).
Remote Control Features:
The included remote control is a universal remote designed to operate both the converter box and most TV brands. Refer to the remote control's specific instructions (usually a separate small leaflet) for programming it to control your television's power and volume functions.
Maintenance
- Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the exterior of the unit. Do not use liquid cleaners or abrasive materials.
- Ventilation: Ensure the ventilation slots on the converter box are not obstructed. Proper airflow prevents overheating.
- Battery Replacement: Replace remote control batteries when they are depleted. Use two new AAA batteries.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No picture or sound. |
|
|
| Poor picture quality or missing channels. |
|
|
| Remote control not working. |
|
|
Specifications
- Model: DTA800B1
- Brand: RCA
- Product Dimensions: 2.8 x 6.5 x 10.2 inches
- Item Weight: 0.64 ounces
- Material: Plastic
- Interface Type: Coaxial, RCA (Audio/Video)
- Number of Channels: 4 (output for CH3/CH4 switch)
- Power: DC Input (via included power adapter)
- Remote Control Batteries: 2 AAA batteries (not included)
Warranty and Support
For warranty information or technical support, please refer to the documentation included with your purchase or visit the official RCA support website. Keep your proof of purchase for warranty claims.
Online Support: www.rca.com/support (This is a placeholder link, please verify the actual support URL for RCA products if available.)
