Introduction
The Trelock ZB 501 Strap Holder is designed to securely attach compatible Trelock locks to various bicycle frame geometries. Its simple and fast tensioning strap assembly allows for quick installation and removal, accommodating pipe diameters from 17mm to 60mm.
Setup and Installation
Follow these steps to properly install your Trelock ZB 501 Strap Holder:
- Identify Mounting Location: Choose a suitable location on your bicycle frame or seat post. The holder is designed for pipe diameters between 17mm and 60mm.
- Position the Holder: Place the Trelock ZB 501 holder against the chosen pipe. Ensure the strap is positioned to wrap around the pipe.
- Secure the Strap: Wrap the tensioning strap around the bicycle pipe and feed it through the designated slot on the holder. The design allows for simple, fast tensioning without annoying threading, utilizing a click grid mechanism for secure fastening. Pull the strap firmly until the holder is snug against the frame.
- Tighten (if applicable): If an Allen key is provided or required for final tightening (as suggested by the image), use it to secure the holder firmly. Do not overtighten.
- Attach Your Lock: Once the holder is securely mounted, you can attach your compatible Trelock bicycle lock to the holder. The holder features a simple quick release mechanism for easy attachment and detachment of the lock.
Image: The Trelock ZB 501 Strap Holder, showing its main body, strap, and an accompanying Allen key for installation.
Operating the Holder
The Trelock ZB 501 Strap Holder is designed for convenient use with your Trelock bicycle lock.
- Attaching a Lock: Align your compatible Trelock lock with the holder's attachment point and push it firmly until it clicks into place.
- Releasing a Lock: To remove your lock, utilize the quick release mechanism on the holder. This typically involves pressing a button or lever to disengage the lock from the holder.
Maintenance
To ensure the longevity and proper function of your Trelock ZB 501 Strap Holder, consider the following maintenance tips:
- Cleaning: Wipe the holder clean with a damp cloth as needed. Avoid harsh chemicals that could damage the plastic or strap material.
- Strap Inspection: Periodically inspect the strap for any signs of wear, fraying, or damage. A damaged strap may compromise the security of your lock.
- Connection Points: Ensure the quick release mechanism and attachment points remain free of dirt and debris to allow for smooth operation.
Troubleshooting
If you encounter issues with your Trelock ZB 501 Strap Holder, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Holder is loose or slides on frame. | Strap not tightened sufficiently or incorrect pipe diameter. | Ensure the strap is pulled taut and secured firmly using the click grid. Verify your frame's pipe diameter is within the 17-60mm range. |
| Difficulty attaching/releasing lock. | Debris in mechanism or misalignment. | Clean the attachment points on both the holder and your lock. Ensure the lock is correctly aligned before attempting to attach or release. |
| Strap shows signs of wear or tearing. | Normal wear and tear or excessive stress. | If the strap is significantly damaged, the holder may need to be replaced to ensure secure transport of your lock. |
Specifications
- Model: ZB 501 (Item model number: 8000795)
- Brand: Trelock
- Color: Black
- Material: Plastic
- Compatible Pipe Diameters: 17mm - 60mm
- Product Dimensions (L x W x H): 20 x 8 x 8 cm (approximately 7.87 x 3.15 x 3.15 inches)
- Item Weight: 140.61 g (approximately 0.31 lbs)
- Included Components: Strap Holder
Image: A side view of the Trelock ZB 501 Strap Holder, illustrating its approximate length of 3.1 inches (7 cm).
Warranty Information
Specific warranty details for the Trelock ZB 501 Strap Holder are not provided in this manual. Please refer to the official Trelock website or contact their customer service for comprehensive warranty information.
Customer Support
For further assistance, technical support, or inquiries regarding your Trelock ZB 501 Strap Holder, please visit the official Trelock website or contact their customer support department.
Trelock Official Website: www.trelock.de
