Energizer 337

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Energizer 337 Button Cell Battery User Manual

Model: 337

Introduction

The Energizer 337 Button Cell Battery is a high-quality, reliable power source designed for miniature electronic devices, particularly watches. Known for its consistent performance and long shelf life, this battery utilizes advanced technology to ensure stable voltage output and excellent leakage resistance.

This manual provides essential information for the proper handling, installation, and maintenance of your Energizer 337 battery to ensure optimal performance and longevity.

Product Features

  • High Energy Density: Achieved through Energizer's original high-precision material-mixing technology, ensuring efficient power delivery.
  • Stable Discharge Characteristics: Provides a constant voltage output throughout its discharge cycle, crucial for sensitive electronics.
  • Excellent Leakage Resistance: Features a unique sealing structure and special sealing-material treatment to prevent leakage.
  • Long Service Life: Maintains over 90% of its charge after storage at 70°F for 5 years, indicating superior shelf stability.
  • Mercury-Free: Environmentally conscious design with 0% mercury content.

Setup and Installation

Proper installation is crucial for the safe and effective operation of your device. Always refer to your device's specific instruction manual for detailed battery replacement procedures.

  1. Identify Battery Compartment: Locate the battery compartment on your device. This is commonly found on the back or underside of watches and small electronics.
  2. Open Compartment: Carefully open the battery compartment using the appropriate tool (e.g., a small screwdriver or watch case opener), if required by your device.
  3. Remove Old Battery (if applicable): If replacing an old battery, gently remove it, noting its orientation (positive (+) and negative (-) terminals).
  4. Insert New Battery: Insert the Energizer 337 battery with the positive (+) side facing the correct direction as indicated by your device's markings. The positive side is typically marked with a plus sign and may have the battery model number printed on it.
  5. Close Compartment: Securely close the battery compartment. Ensure it is properly sealed to prevent dust or moisture ingress.
  6. Test Device: Verify that your device powers on and functions correctly after battery installation.

Important Safety Note: Keep batteries out of reach of small children. If swallowed, seek immediate medical attention.

Operating Guidelines

The Energizer 337 battery is designed for continuous, low-drain power supply. Once installed, it will provide stable voltage to your device until its charge is depleted.

  • Intended Use: This battery is primarily recommended for watches and other small electronic devices requiring a 1.55 Volt silver oxide button cell.
  • Voltage Output: The battery provides a nominal voltage of 1.55 Volts.
  • Discharge Characteristics: Expect a consistent power output throughout the battery's operational life. Performance may gradually decline as the battery nears depletion.

Maintenance and Storage

Proper care and storage can extend the shelf life and ensure the reliability of your Energizer 337 batteries.

  • Storage Temperature: Store batteries in a cool, dry place, ideally at room temperature (around 70°F or 21°C). Avoid extreme temperatures, both hot and cold, as these can degrade battery performance and shelf life.
  • Humidity: Keep batteries away from high humidity environments.
  • Original Packaging: Store unused batteries in their original packaging to prevent short-circuiting and protect terminals.
  • Disposal: Dispose of depleted batteries according to local regulations. Do not incinerate or mutilate batteries.
  • Cleaning: If battery terminals appear dirty, gently wipe them with a clean, dry cloth before installation.

Troubleshooting

ProblemPossible CauseSolution
Device not powering on after battery installation.Incorrect battery orientation; depleted battery; dirty battery contacts; device malfunction.Check battery orientation (+/-). Ensure battery is new and fully charged. Clean battery contacts in the device. If issues persist, consult device manual or a professional.
Device operating intermittently or weakly.Battery nearing end of life; poor contact.Replace the battery with a new one. Ensure battery is seated firmly in the compartment.
Battery appears swollen or leaking.Overheating; improper storage; battery defect.Immediately and carefully remove the battery (wear gloves if leaking). Dispose of it safely according to local regulations. Do not use the battery.

Specifications

AttributeDetail
Model Number337 (SR416SW)
BrandEnergizer
Battery TypeSilver Oxide Button Cell
Voltage1.55 Volts
Mercury Content0% Hg (Mercury-Free)
Recommended UseWatches, small electronics
Item WeightApproximately 0.634 ounces
Package DimensionsApproximately 3.11 x 1.61 x 0.35 inches
Energizer 337 Button Cell Battery in packaging, showing '0% Hg', 'Energizer' logo, and '337 (SR416SW) LOW DRAIN 1.55V SILVER OXIDE' text.

Image: Energizer 337 Button Cell Battery in its blister packaging. The packaging highlights "0% Hg" (Mercury-Free) and the Energizer brand. The battery itself is visible, labeled "337 Energizer". Text on the packaging clearly states "337 (SR416SW) LOW DRAIN 1.55V SILVER OXIDE".

Warranty and Support

Energizer batteries are manufactured to high-quality standards. For specific warranty information or technical support, please refer to the official Energizer website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, you may visit the Energizer Store on Amazon.

© 2024 Energizer. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.