Product Overview
The Progress Lighting P7206-30EB is a contemporary flush mount fluorescent light fixture designed for various indoor applications such as kitchens or workshops. It features contoured white acrylic domes and curved trim, providing a pleasing halo effect. This fixture operates on a standard 120-volt HPF electric ballast and is designed for ceiling mount installation.
Figure 1: Front view of the Progress Lighting P7206-30EB fluorescent light fixture, showcasing its contoured white acrylic domes and textured white molding.
Safety Information
WARNING: To avoid electric shock, ensure power is turned off at the circuit breaker or fuse box before installation, maintenance, or bulb replacement. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unsure about proper installation.
- Do not install this fixture in wet or damp locations.
- Ensure the fixture is securely mounted to a structural element of the ceiling.
- Use only the specified bulb type and wattage to prevent overheating and damage.
- Keep flammable materials away from the light fixture.
Package Contents
Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the product. Contact Progress Lighting customer service for assistance.
- (1) P7206-30EB Fluorescent Light Fixture
- (1) Mounting Hardware Kit (screws, wire nuts, etc.)
- Bulbs (4x 32W F32T8) are NOT included and must be purchased separately.
Specifications
| Feature | Detail |
|---|---|
| Model Number | P7206-30EB |
| Dimensions (L x W x H) | 59 inches x 21 inches x 6-7/8 inches (149.86 cm x 53.34 cm x 17.48 cm) |
| Weight | Approximately 15.9 kg (35 lbs) |
| Finish | Textured White |
| Diffuser Material | White Acrylic |
| Bulb Type | Fluorescent (F32T8) |
| Number of Bulbs | 4 (not included) |
| Wattage per Bulb | 32 Watts |
| Total Wattage | 128 Watts |
| Voltage | 120 Volts |
| Ballast Type | HPF Electric Ballast |
| Installation Method | Flush Mount |
| Certifications | UL Listed, cUL Listed, Energy Star |
Setup and Installation
Important: Installation should be performed by a qualified electrician or a person with adequate knowledge of electrical wiring. Ensure power is disconnected at the main circuit breaker before proceeding.
- Prepare the Installation Area:
- Turn off power at the main circuit breaker or fuse box to the outlet box where the fixture will be installed.
- Ensure the mounting surface is clean, dry, and structurally sound.
- Mount the Fixture:
- Carefully remove the fixture from its packaging.
- Align the fixture's mounting holes with the outlet box or pre-drilled holes in the ceiling. This fixture is designed to cover a standard outlet box.
- Secure the fixture to the ceiling using the provided mounting screws. Ensure it is firmly attached and does not wobble.
- Electrical Connections:
- Connect the fixture's white wire to the white (neutral) wire from the outlet box using a wire nut.
- Connect the fixture's black wire to the black (hot) wire from the outlet box using a wire nut.
- Connect the fixture's ground wire (usually bare copper or green) to the house ground wire (usually bare copper or green) from the outlet box. If no house ground wire is present, connect to the green grounding screw on the mounting bracket.
- Carefully tuck all wires into the outlet box.
- Install Bulbs and Diffuser:
- Insert four (4) 32-watt F32T8 fluorescent bulbs into the lamp holders. Ensure they are seated correctly.
- Carefully place the white acrylic diffuser onto the fixture, ensuring it is securely in place.
- Restore Power:
- Turn the power back on at the circuit breaker or fuse box.
- Test the fixture to ensure it operates correctly.
Figure 2: The P7206-30EB fixture installed in a kitchen setting, demonstrating its flush mount appearance and illumination.
Operating Instructions
The Progress Lighting P7206-30EB fixture is designed for simple operation. Once properly installed and wired to a wall switch, it functions like any standard light fixture.
- Turning On/Off:
- Flip the wall switch connected to the fixture to the "ON" position to illuminate the bulbs.
- Flip the wall switch to the "OFF" position to turn off the light.
Maintenance
Regular maintenance ensures optimal performance and longevity of your light fixture.
- Cleaning:
- Before cleaning, ensure the power to the fixture is turned off at the circuit breaker.
- Wipe the exterior of the fixture and the acrylic diffuser with a soft, damp cloth.
- Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or diffuser.
- Allow the fixture to dry completely before restoring power.
- Bulb Replacement:
- Turn off power to the fixture at the circuit breaker.
- Carefully remove the acrylic diffuser.
- Allow old bulbs to cool before handling. Gently twist and remove the old F32T8 fluorescent bulbs.
- Insert new 32-watt F32T8 fluorescent bulbs, ensuring they are properly seated in the lamp holders.
- Replace the acrylic diffuser.
- Restore power and test the fixture.
Troubleshooting
If you experience issues with your light fixture, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not light up. | No power to the fixture. Loose wire connections. Faulty bulbs. Faulty ballast. | Check circuit breaker/fuse. Ensure wall switch is ON. Turn off power, check all wire connections. Replace bulbs. Consult a qualified electrician for ballast replacement. |
| Bulbs flicker or hum. | Incorrect bulb type/wattage. Loose bulb connection. Aging ballast. | Ensure correct F32T8 32W bulbs are used. Re-seat bulbs firmly. Consult a qualified electrician for ballast inspection/replacement. |
| Light output is dim. | Dirty diffuser/bulbs. Aging bulbs. | Clean diffuser and bulbs. Replace bulbs. |
If the problem persists after attempting these solutions, contact a qualified electrician or Progress Lighting customer support.
Warranty and Support
Warranty: The Progress Lighting P7206-30EB fixture comes with a 1-Year Limited Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized repairs.
Customer Support: For technical assistance, replacement parts, or warranty claims, please contact Progress Lighting customer service. Refer to the official Progress Lighting website for the most current contact information.
Please retain your purchase receipt as proof of purchase for warranty purposes.
