Taylor 161

Taylor 18-inch Indoor/Outdoor Metal Wall Clock User Manual

Model: 161 | Brand: Taylor

Introduction

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Taylor 18-inch Indoor/Outdoor Metal Wall Clock. Designed for both indoor and outdoor environments, this clock features an oversized dial for easy readability and durable construction to withstand various weather conditions.

Taylor 18-inch Indoor/Outdoor Metal Wall Clock front view

Figure 1: Front view of the Taylor 18-inch Indoor/Outdoor Metal Wall Clock.

Setup

1. Battery Installation

The clock requires one (1) AA battery (not included) for operation. Locate the battery compartment on the back of the clock.

  1. Remove the battery compartment cover.
  2. Insert one AA battery, ensuring the polarity (+/-) matches the indicators inside the compartment.
  3. Replace the battery compartment cover.
Back view of Taylor clock showing battery compartment

Figure 2: Back view of the clock, highlighting the battery compartment and setting dial.

2. Setting the Time

To set the correct time, locate the time-setting dial on the back of the clock, typically near the center of the movement mechanism. Gently rotate this dial until the clock hands display the accurate time.

3. Mounting Instructions

The clock is designed for easy and secure wall mounting. For optimal performance and longevity, choose a location out of direct sunlight.

  1. Use two screws (not included) to securely mount the clock.
  2. Place the top screw approximately 1 inch below where you would like the top of the clock to rest. Leave 3/16 inch (0.187 inch) of the screw head out from the wall.
  3. Place the top keyhole on the back of the clock over the top screw and slide down to secure.
  4. Bend the bottom hanger down to expose its keyhole and use a second screw to mount securely, ensuring the clock is level and stable.
Diagram showing how to mount the Taylor clock on a wall

Figure 3: Detailed mounting instructions for the wall clock.

Operation

Once the battery is installed and the time is set, your Taylor clock will begin to operate. The large, bold numbers and clear dial face ensure easy readability from a distance.

Indoor and Outdoor Use

This clock is designed for versatile use in both indoor and outdoor environments. Its durable metal frame and shatterproof lens are constructed to withstand various elements, including extreme cold and heat.

Taylor clock mounted on an outdoor patio wall next to a pool

Figure 4: Clock displayed in an outdoor patio setting.

Taylor clock mounted on an indoor wall above a chair

Figure 5: Clock displayed in an indoor living space.

Maintenance

Cleaning

To clean the clock, wipe the surface with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish or the shatterproof lens.

Battery Replacement

Replace the AA battery annually or when the clock hands stop moving or begin to slow down. Follow the battery installation steps outlined in the Setup section.

Weather Resistance

The clock features a durable metal construction and a shatterproof lens designed to be weather-resistant. While it can withstand outdoor elements, prolonged exposure to extreme conditions may affect its lifespan. The clock movement cover provides additional protection for outdoor use.

Troubleshooting

ProblemPossible CauseSolution
Clock is not running or stops intermittently.Battery is dead or incorrectly installed.Replace the AA battery, ensuring correct polarity.
Time is inaccurate.Time was not set correctly or battery is low.Reset the time using the dial on the back. Replace battery if issue persists.
Clock hands are stuck.Obstruction or internal mechanism issue.Gently check for any visible obstructions. If none, contact customer support.

Specifications

  • Model Number: 161
  • UPC: 077784001615
  • Dimensions: 18 inches (Diameter) x 1.38 inches (Depth)
  • Item Weight: 2.25 Pounds
  • Power Source: 1 x AA Battery (not included)
  • Material: Metal frame, Shatterproof lens
  • Display Type: Analog
  • Usage: Indoor/Outdoor
  • Color: White dial with black numbers, brushed silver metal frame
Diagram showing dimensions of the Taylor 18-inch clock

Figure 6: Product dimensions.

Warranty

This Taylor clock comes with a One (1) Year Limited Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accident, alteration, neglect, or unauthorized repair. Please retain your proof of purchase for warranty claims.

Support

For further assistance, technical support, or warranty inquiries, please visit the official Taylor website or contact their customer service department. Refer to the product packaging or the brand's official website for the most current contact information.

You can find more information and contact details by visiting the Taylor Store on Amazon.

© 2025 Taylor. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.