Cambro Camtainer® Soup Carrier

1. Product Overview

The Cambro 350LCD-110 Camtainer® is a durable, insulated beverage carrier designed to hold, transport, and serve hot or cold beverages and soups. Constructed with seamless double-wall polyethylene material and thick foam insulation, it ensures temperature retention for extended periods. Its robust design features sturdy plastic latches that secure the lid tightly, preventing spills and maintaining contents' temperature. This unit is ideal for catering, events, or any situation requiring efficient and safe transport of liquids.

Key Features:

• Beverage carrier cart is used to hold, transport and serve hot or cold beverages.
• Constructed with seamless double-wall polyethylene material with thick foam insulation.
• Camtainer features sturdy plastic latches secure lids tightly and will never rust.
• Stack units on riser to fill large cups or coffee pots.
• Available in black color and hold 3-3/8-gallon beverage.

2. Setup and Preparation

1. Initial Cleaning: Before first use, wash the Camtainer thoroughly with warm, soapy water. Rinse completely and allow to air dry.
2. Lid Placement: Ensure the lid is properly aligned with the container's opening. The gasket on the lid should sit flush against the rim of the container to create a tight seal.
3. Secure Latches: Close the lid and firmly press down the plastic latches on both sides until they click into place. This ensures the lid is securely fastened and prevents leaks during transport.
4. Pre-heating/Pre-chilling (Optional): For optimal temperature retention, pre-heat the Camtainer with hot water or pre-chill with cold water for 15-20 minutes before adding your desired contents.

3. Operating Instructions

Filling the Camtainer:

• Open the latches and remove the lid.
• Carefully pour your hot or cold beverage/soup into the container. Do not overfill; leave some space at the top to prevent spills when closing the lid.
• Replace the lid and secure the latches firmly.

Serving:

• Place the Camtainer on a stable, flat surface.
• To dispense, open the spigot. Ensure cups or serving containers are positioned correctly to catch the liquid.
• Close the spigot tightly after use to prevent drips.

Stacking and Transport:

The Camtainer features Sta-stack interlocking for stable stacking during transport and storage. For filling large cups or coffee pots, units can be stacked on a riser (sold separately).

This image illustrates the dimensions of the Cambro Camtainer, showing its length of 16.5 inches, width of 9 inches, and height of 18.38 inches, providing a clear understanding of its size.

4. Care and Maintenance

• Cleaning: The Camtainer is dishwasher safe. For manual cleaning, wash with warm water and a mild detergent. Use a soft brush or cloth to clean all surfaces, including the inside, lid, and spigot.
• Rinsing: Rinse thoroughly with clean water to remove all soap residue.
• Drying: Allow the unit to air dry completely before storing to prevent odors or mildew. Store with the lid slightly ajar to ensure proper ventilation.
• Inspection: Periodically inspect the latches, gasket, and spigot for any signs of wear or damage. Replace components as needed to maintain optimal performance.

5. Troubleshooting

• Issue: Liquid not staying hot/cold.
  Solution: Ensure the lid is securely latched and the gasket is properly seated. Pre-heat or pre-chill the unit before use. Avoid opening the lid unnecessarily.
• Issue: Leaks from the lid.
  Solution: Check if the lid is properly aligned and the latches are fully engaged. Inspect the lid gasket for any damage or debris; clean or replace if necessary.
• Issue: Spigot dripping.
  Solution: Ensure the spigot is fully closed. If dripping persists, the spigot may need to be tightened or its internal seal inspected for wear.
• Issue: Difficulty closing latches.
  Solution: Ensure the lid is correctly positioned. Check for any obstructions or damage to the latches or their receiving points on the container.

6. Product Specifications

7. Warranty and Support

For information regarding product warranty, returns, or technical support, please contact Cambro Manufacturing Company directly through their official website or customer service channels. Keep your purchase receipt and product model number (350LCD-110) handy when contacting support.

You can visit the official Cambro website for more information: www.cambro.com