Introduction
This manual provides essential instructions for the setup, operation, and maintenance of your Poolmaster 81435 Floating Penguin Pool Décor. Designed to add a decorative element to your pool or backyard, this 33-inch inflatable penguin features a water-fill pocket for stability.
Image: The Poolmaster 33-inch Floating Penguin Pool Décor, featuring a black and white penguin in formal wear with a red bow tie.
Safety Information
Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in injury or product damage.
- This product is not a life-saving device. Do not use it as a flotation device for swimming or as a substitute for adult supervision.
- Keep away from sharp objects, heat sources, and open flames.
- Do not over-inflate the product.
- Ensure the product is fully inflated and the water bladder is filled (if applicable) before placing it in water.
- Children should be supervised by an adult at all times when the product is in use in or near water.
What's in the Box
- 1 x Inflatable Penguin Pool Décor
Setup
Follow these steps to prepare your Floating Penguin for use:
- Locate the Water Bladder Valve: Identify the valve for the water-fill pocket located on the underside of the penguin.
- Fill the Water Bladder: Open the valve and fill the bladder with water. This weighted base helps keep the penguin stable and upright when floating. Securely close the valve once filled.
- Inflate the Penguin: Locate the air valve(s) on the main body of the penguin. Use an air pump (not included) to inflate the penguin until it is firm but not rigid. Do not over-inflate. Securely close the air valve(s).
Image: A hand pointing to a valve on an inflatable item, with water being injected into it, illustrating the water bladder filling process.
For a visual guide on the water-fill and inflation process for a similar Poolmaster product, please refer to the video below:
Video: This video demonstrates the water-fill and inflation process for a Poolmaster flamingo float, which uses a similar design to the penguin décor for stability and buoyancy.
Operating Instructions
Once fully set up, your Floating Penguin is ready to be placed in your pool or backyard for decorative purposes.
- Gently place the inflated penguin into the water. The water-filled base will help it remain upright and float stably.
- Position the penguin as desired in your pool or on a flat surface in your backyard.
- The penguin is designed to float freely and add a playful accent to your aquatic environment.
Image: A person enjoying the pool with the Poolmaster Floating Penguin, demonstrating its use as a decorative pool item.
Image: The Poolmaster Floating Penguin alongside another inflatable float in a swimming pool, showcasing its decorative presence.
Maintenance
Proper care will extend the life of your Floating Penguin:
- Cleaning: Clean the product with mild soap and water. Rinse thoroughly and allow to air dry completely before storage.
- Storage: When not in use, deflate the penguin and drain any water from the bladder. Fold neatly and store in a cool, dry place away from direct sunlight and extreme temperatures.
- Repairs: In case of small punctures, use a vinyl repair kit (not included) to patch the affected area.
Troubleshooting
- Product does not float upright: Ensure the water bladder is completely filled with water. Check for any air leaks in the main body that might affect buoyancy.
- Product is deflating: Check all air valves to ensure they are securely closed. Inspect the entire surface for punctures or tears. Use a repair kit for any identified leaks.
Specifications
| Model Number | 81435 |
| Brand | Poolmaster |
| Dimensions (approximate deflated size) | 33 x 10 x 10.37 inches |
| Item Weight | 12.6 ounces |
| Material | Vinyl |
| Color | Penguin (Black and White) |
Warranty Information
This Poolmaster product is covered by the manufacturer's standard warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the documentation included with your purchase or visit the official Poolmaster website.
Customer Support
If you have any questions, require assistance, or need to report an issue with your Poolmaster Floating Penguin Pool Décor, please contact Poolmaster customer support through their official website or the contact information provided on the product packaging.