Casio TQ-141-8JF

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Casio TQ-141-8JF Travel Clock Instruction Manual

1. Introduction

Thank you for purchasing the Casio TQ-141-8JF Travel Clock. This compact analog alarm clock is designed for portability and ease of use, featuring a clear display and a reliable alarm function. This manual provides detailed instructions for setting up, operating, and maintaining your clock to ensure optimal performance.

Casio TQ-141-8JF Travel Clock held in a hand, illustrating its compact size.

Figure 1.1: The Casio TQ-141-8JF Travel Clock, demonstrating its compact and portable design when held in a hand.

2. Safety Information

  • Do not expose the clock to extreme temperatures, direct sunlight, or high humidity.
  • Avoid dropping the clock or subjecting it to strong impacts.
  • Keep batteries out of reach of children. If swallowed, seek medical attention immediately.
  • Dispose of used batteries according to local regulations.
  • Do not attempt to disassemble or repair the clock yourself. Contact qualified service personnel.

3. Package Contents

Please check that all items are present in the package:

  • Casio TQ-141-8JF Travel Clock (1 unit)
  • AA Battery (1 unit, pre-installed or included separately)

4. Product Overview

The Casio TQ-141-8JF is an analog travel clock featuring a clear, easy-to-read dial with a step second hand for precise timekeeping. Its compact, rounded square body makes it ideal for travel.

Front view of the Casio TQ-141-8JF Travel Clock, showing the analog dial with numbers 1-12 and hands.

Figure 4.1: Front view of the Casio TQ-141-8JF Travel Clock.

Controls and Components:

Back view of the Casio TQ-141-8JF Travel Clock, showing the time setting knob, alarm setting knob, and alarm ON/OFF switch.

Figure 4.2: Rear view of the Casio TQ-141-8JF Travel Clock, highlighting the control knobs and switches.

  • Time Setting Knob: Located on the back, used to adjust the current time.
  • Alarm Setting Knob: Located on the back, used to set the desired alarm time.
  • Alarm ON/OFF Switch: Located on the back, slides to activate or deactivate the alarm.
  • Battery Compartment: Located on the back, holds the AA battery.

5. Setup

5.1. Battery Installation

  1. Locate the battery compartment cover on the back of the clock (refer to Figure 4.2).
  2. Slide or gently pry open the battery compartment cover.
  3. Insert one AA battery, ensuring the positive (+) and negative (-) terminals are aligned correctly according to the diagram inside the compartment.
  4. Replace the battery compartment cover securely.

5.2. Initial Time Setting

  1. Locate the Time Setting Knob on the back of the clock (refer to Figure 4.2).
  2. Rotate the Time Setting Knob in either direction until the hour and minute hands display the current time.

6. Operating Instructions

6.1. Setting the Alarm

  1. Locate the Alarm Setting Knob on the back of the clock (refer to Figure 4.2).
  2. Rotate the Alarm Setting Knob until the alarm hand points to your desired alarm time.
  3. To activate the alarm, slide the Alarm ON/OFF Switch to the "ON" position.
  4. To deactivate the alarm, slide the Alarm ON/OFF Switch to the "OFF" position.

6.2. Using the Alarm

When the alarm is set to "ON" and the current time reaches the set alarm time, the clock will emit an electronic alarm sound. To stop the alarm, slide the Alarm ON/OFF Switch to the "OFF" position.

7. Maintenance

7.1. Cleaning

Wipe the clock's surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the finish.

7.2. Battery Replacement

When the clock's movement becomes erratic or stops, it is time to replace the battery. Follow the steps in Section 5.1 for battery installation. Always use a fresh AA battery.

8. Troubleshooting

  • Clock not working: Ensure the AA battery is correctly installed and is not depleted. Replace the battery if necessary.
  • Alarm not sounding: Verify that the Alarm ON/OFF Switch is in the "ON" position. Check that the alarm time is correctly set. Ensure the battery has sufficient power.
  • Inaccurate timekeeping: Replace the battery with a fresh one. If the issue persists, contact customer support.

9. Specifications

FeatureSpecification
BrandCasio
Model NumberTQ-141-8JF
Display TypeAnalog
Special FeatureAlarm, Step Second Hand
Power SourceBattery Powered
Battery Type1 x AA (included)
Product Dimensions (W x H x D)2.5" x 2.6" x 1.3" (approx. 6.4cm x 6.7cm x 3.4cm)
Item Weight2.82 ounces (approx. 80 grams)
MaterialResin (body), Metal (frame)
ColorSilver
Casio TQ-141-8JF Travel Clock with dimensions labeled in centimeters: 6.4cm width, 6.7cm height, 3.4cm depth, and weight of approximately 80g.

Figure 9.1: Dimensions and weight of the Casio TQ-141-8JF Travel Clock.

10. Warranty and Support

This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact Casio customer service through their official website or the contact information provided in your product documentation.

© 2023 Casio Computer Co., Ltd. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.