1. Introduction
Thank you for choosing the WMF Mini Mill. This compact and efficient mill is designed to freshly grind spices, salt, and pepper, releasing their full aroma for an enhanced culinary experience. Equipped with a high-quality ceramic grinding mechanism, this mill offers durability and precise control over grinding fineness.
Please read this manual carefully before first use to ensure proper operation, maintenance, and to maximize the lifespan of your product.
2. Safety Instructions
- Keep out of reach of children.
- Do not immerse the entire mill in water. Refer to the 'Maintenance and Cleaning' section for proper cleaning instructions.
- Use only for grinding dry spices, salt, and pepper. Do not use for wet or oily ingredients, as this may damage the grinding mechanism.
- Handle with care. The mill contains glass/acrylic components that can break if dropped.
- Ensure the mill is securely assembled before use.
3. Product Overview
The WMF Mini Mill consists of several key components designed for optimal grinding performance.
Figure 1: WMF Mini Mill 064819990. A sleek, cylindrical mill with a stainless steel top and bottom, and a transparent acrylic body.
Figure 2: Exploded view of the WMF Mini Mill showing its individual components: top cap, transparent body, central shaft, spring, ceramic grinding mechanism, and base.
Components:
- Top Cap: Protects the grinding mechanism and provides a grip for operation.
- Transparent Body: Allows visibility of the contents and indicates when refilling is needed.
- Central Shaft: Connects the top cap to the grinding mechanism.
- Spring: Ensures proper tension for the grinding mechanism.
- Ceramic Grinding Mechanism: The core component responsible for grinding spices. Features adjustable fineness.
- Base: Provides stability and houses the lower part of the grinding mechanism.
4. Setup
4.1 Unpacking
Carefully remove all components from the packaging. Inspect the mill for any damage. Retain packaging for future storage or transport if necessary.
4.2 Filling the Mill
- Hold the mill firmly and twist the top cap counter-clockwise to remove it.
- Carefully pour your desired whole spices, peppercorns, or coarse salt into the transparent body. Do not overfill.
- Replace the top cap by aligning it and twisting clockwise until secure.
Figure 3: Peppercorns being poured into the WMF Mini Mill for refilling.
5. Operating Instructions
5.1 Adjusting Grinding Fineness
The WMF Mini Mill features an adjustable ceramic grinding mechanism, allowing you to select your preferred fineness from coarse to fine.
- Locate the adjustment knob, typically found at the top or bottom of the grinding mechanism.
- Turn the knob clockwise for a finer grind and counter-clockwise for a coarser grind. Test the grind on a surface to achieve your desired consistency.
Figure 4: A hand adjusting the grinding fineness knob on the WMF Mini Mill.
5.2 Grinding Spices
Once filled and adjusted, the mill is ready for use.
- Hold the mill over your food or dish.
- Twist the top cap clockwise to activate the grinding mechanism. The freshly ground spices will dispense from the bottom.
- Continue twisting until the desired amount of spice is dispensed.
6. Maintenance and Cleaning
Regular cleaning ensures optimal performance and hygiene for your WMF Mini Mill.
6.1 General Cleaning
- Wipe the exterior of the mill with a damp cloth.
- Do not use abrasive cleaners or scouring pads, as these can scratch the stainless steel or acrylic surfaces.
6.2 Cleaning the Grinding Mechanism
- Empty any remaining spices from the mill.
- Disassemble the mill by twisting off the top cap.
- Use a small brush (e.g., a clean toothbrush or pastry brush) to gently remove any spice residue from the ceramic grinding mechanism.
- The ceramic grinder is harder than steel and resistant to corrosion, but it should be cleaned dry. Avoid washing the ceramic mechanism with water, as moisture can cause spices to clump and affect performance.
- Ensure all parts are completely dry before reassembling.
Important: This product is NOT dishwasher safe.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mill not grinding or grinding poorly. | Mill is empty; grinding mechanism is clogged; fineness setting is too fine. | Refill the mill; clean the grinding mechanism; adjust the fineness setting to a coarser level. |
| Spices are clumping. | Moisture inside the mill or spices are not dry enough. | Ensure spices are completely dry before filling. Disassemble and thoroughly dry all mill components. |
| Mill is difficult to turn. | Grinding mechanism is clogged or fineness setting is too fine for the spice type. | Clean the grinding mechanism. Adjust the fineness setting to a coarser level. |
8. Specifications
- Brand: WMF
- Model Number: 06.4819.9990
- Material: Cromargan 18/10 Stainless Steel, Acrylic Glass, Ceramic Grinder
- Color: Silver
- Dimensions (H x Ø): Approximately 11 cm x 3.5 cm
- Item Weight: 100 g
- Operation Mode: Manual
- Recommended Use: Grinding dry spices, salt, and pepper
- Dishwasher Safe: No
- Country of Origin: China
9. Warranty and Support
9.1 Manufacturer's Warranty
WMF provides a 10-year warranty on the ceramic grinding mechanism of this product. This warranty covers defects in material and workmanship under normal household use.
Figure 5: Close-up of the WMF Mini Mill's ceramic grinding mechanism, highlighting the 10-year warranty.
For detailed warranty conditions and to make a claim, please refer to the official WMF website or contact WMF customer service.
9.2 Customer Support
If you have any questions, require assistance, or need to report an issue with your WMF Mini Mill, please contact WMF customer support through their official website or the retailer where you purchased the product.
