Introduction
Welcome to the user manual for your new Escali Digital Glass Bath Scale. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your scale to ensure accurate and reliable performance. The Escali Clear Glass Bathroom Scale is designed for simplicity and elegance, featuring an impact-resistant safety glass platform and a clear, easy-to-read digital display. It automatically turns on when you step on it and turns off to conserve battery life.
Important Safety Information
- Always use the scale on a hard, flat, and stable surface to ensure accurate readings. Avoid carpets or uneven floors.
- Do not immerse the scale in water or use abrasive cleaners. Clean with a damp cloth.
- The glass platform can be slippery when wet. Ensure the surface is dry before stepping on.
- This scale is intended for personal use to monitor body weight and is not a medical device for diagnosis or treatment.
- Keep out of reach of small children.
- Do not jump on the scale or subject it to excessive force.
Setup Guide
1. Unpacking
Carefully remove the scale from its packaging. Inspect the scale for any signs of damage. If damaged, do not use and contact customer support.
2. Battery Installation
Your Escali scale comes with the necessary Lithium Metal battery included. Locate the battery compartment on the underside of the scale. Open the compartment, insert the battery, ensuring correct polarity, and close the cover securely.
Image: Top view of the Escali Digital Glass Bath Scale, showcasing its clear round platform and digital display.
3. Initial Placement
Place the scale on a hard, flat, and level surface. Avoid placing it on carpets, rugs, or uneven tiles, as this can affect accuracy.
4. Unit Selection (Pounds/Kilograms)
The scale can display measurements in both pounds (lb) and kilograms (kg). To switch between units, locate the unit switch button on the underside of the scale, usually near the battery compartment. Press it to toggle between the desired measurement unit.
Image: An infographic highlighting the scale's features, including easy-to-read display, pounds & kilograms measurement, modern design, and clear glass platform.
Operating Your Scale
1. Taking a Weight Measurement
To take a measurement, simply step onto the center of the scale's platform. The scale features 'Instant On' technology, meaning it will automatically activate and begin measuring your weight. Stand still until your weight is displayed and stabilizes. The 'Display Hold' feature will keep the weight visible for approximately 10 seconds after you step off, allowing ample time to read the result.
Image: A person standing on the Escali Digital Glass Bath Scale, demonstrating its use in a home setting.
Image: A close-up view of feet on the Escali Digital Glass Bath Scale, with the digital display showing a weight reading.
2. Automatic Shut-off
To conserve battery life, the scale is equipped with an automatic shut-off feature. After a few seconds of inactivity or once the weight reading has been displayed and held, the scale will automatically turn off.
Care and Maintenance
- Cleaning: Wipe the scale's surface with a soft, damp cloth. Do not use chemical cleaning agents or abrasive materials, as they may damage the glass or electronic components.
- Storage: Store the scale in a dry place at room temperature. Avoid extreme temperatures or high humidity.
- Battery Replacement: When the display shows a low battery indicator (e.g., "Lo"), it's time to replace the battery. Refer to the 'Battery Installation' section for instructions.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No display or "Lo" message | Low battery | Replace the Lithium Metal battery. |
| Inaccurate or inconsistent readings |
|
|
| Display shows "Err" | Overload or internal error | Step off the scale. If the error persists, contact customer support. Ensure weight does not exceed 400 lb (180 kg). |
Product Specifications
| Specification | Detail |
|---|---|
| Brand | Escali |
| Model Number | B180RC |
| Color | Clear Round |
| Weight Limit | 400 Pounds (180 kg) |
| Readout Accuracy | 0.2 lb (0.1 kg) |
| Display Type | Digital Display |
| Special Feature | Auto Shut Off |
| Material | Glass, Tempered Glass |
| Product Dimensions | 13 x 1.5 x 13 inches |
| Item Weight | 2 Pounds |
| Batteries | 1 Lithium Metal battery (included) |
| First Available Date | September 16, 2003 |
Warranty and Customer Support
Escali products are known for their precision and quality. This product typically comes with a 5-year warranty, ensuring long-term reliability. For any questions, technical assistance, or warranty claims, please visit the official Escali website or contact their customer support directly. Keep your purchase receipt as proof of purchase for warranty purposes.
For more information, visit the Escali Store on Amazon.
