Energizer SR621SW

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Energizer 364 / 363 SR621SW Watch Battery Instruction Manual

Your guide to reliable power for your timepieces.

Introduction

This manual provides essential information for the safe and effective use of Energizer 364 / 363 SR621SW silver oxide watch batteries. Energizer batteries are known for their uncompromising quality and consistent performance, featuring high energy density, stable discharge characteristics, and excellent leakage resistance. These batteries are designed to provide reliable power for a variety of small electronic devices, particularly watches.

Important Safety Information

Please read and understand all safety information before handling or installing batteries.

  • Keep out of reach of children: Button cell batteries are small and can be swallowed. Ingestion can lead to serious injury or death. Seek immediate medical attention if a battery is swallowed.
  • Do not recharge: These batteries are single-use and not designed for recharging. Attempting to recharge them may cause leakage, fire, or explosion.
  • Do not disassemble or short-circuit: Disassembling or short-circuiting batteries can cause them to overheat, leak, or explode.
  • Do not expose to extreme temperatures: Avoid exposing batteries to excessive heat or cold, as this can reduce performance or cause damage.
  • Mercury-Free: Energizer 364 / 363 SR621SW batteries are 0% mercury, making them a safer choice for the environment.
Energizer 364/363 SR621SW Watch Batteries in blister packaging.

Image: A hand holding a blister pack of five Energizer 377/376 Multi-Drain 1.55V silver oxide watch batteries. The packaging clearly indicates "0% Hg" and shows a warning symbol for keeping batteries away from children. This image illustrates the typical packaging for Energizer watch batteries.

Setup

Identifying Your Battery

Ensure you have the correct battery type for your device. The Energizer 364 / 363 SR621SW is a common silver oxide button cell battery. Always cross-reference the model number on your old battery or device manual with the new battery.

Preparing for Installation

Before handling the battery, ensure your hands are clean and dry. It is recommended to use non-conductive tweezers to avoid touching the battery's surface directly, as oils from your skin can affect performance and lifespan. Work in a well-lit area to prevent misplacement of small components.

Video: A close-up view of Energizer 377/376 watch batteries in their blister packaging, demonstrating how they are secured and presented. This video helps visualize the product as it comes packaged.

Video: A detailed view of an Energizer 364 watch battery, held with tweezers, showing its small size and markings. The video also compares its thickness to a 377/376 battery, highlighting the subtle differences between common watch battery types.

Operating

Battery Insertion

To insert the battery into your watch or device:

  1. Carefully open the battery compartment of your device, typically located on the back. Refer to your device's specific manual for instructions on opening.
  2. Remove the old battery, noting its orientation (positive (+) and negative (-) sides).
  3. Insert the new Energizer 364 / 363 SR621SW battery with the correct polarity, usually with the positive (+) side facing up.
  4. Gently close the battery compartment, ensuring it is securely sealed.

Proper Handling

Always handle batteries with care. Avoid dropping them or subjecting them to strong impacts. Do not mix new and old batteries, or batteries of different types, as this can lead to leakage or reduced performance.

Maintenance

Storage

For optimal battery life, store unused Energizer 364 / 363 SR621SW batteries in their original packaging at room temperature in a dry place. Avoid storing them in direct sunlight or areas with high humidity. Do not store loose batteries together, as they may short-circuit.

Disposal

Dispose of used batteries responsibly according to local regulations. Many communities have recycling programs for batteries. Do not dispose of batteries in household waste or by incineration.

Troubleshooting

Watch Not Functioning After Battery Replacement

  • Check Battery Orientation: Ensure the battery is inserted with the correct positive (+) and negative (-) polarity.
  • Clean Contacts: Gently clean the battery contacts in the device with a dry, non-abrasive cloth to remove any dirt or corrosion.
  • Verify Battery Type: Double-check that you have installed the correct 364 / 363 SR621SW battery type for your device.
  • Reset Mechanism: Some watches require a manual reset after battery replacement. Consult your watch's manual for specific instructions.

Short Battery Life

  • Storage Conditions: Ensure batteries were stored properly before use. Improper storage can reduce lifespan.
  • Device Power Draw: A malfunctioning device might draw excessive power, leading to premature battery depletion. Consider having the device inspected by a professional.
  • Battery Age: Even unused batteries have a shelf life. Check the expiration date on the packaging.

Specifications

BrandEnergizer
Model NameSR621SW (also known as 364 / 363)
Model NumberEO-ACZ3-N6RM
Battery Cell TypeSilver Oxide
Nominal Voltage1.55 Volts
ReusabilitySingle Use
Item Dimensions0.04 x 0.04 x 0.04 inches
Battery Weight0.8 Grams
Service MaintenanceIn excess of 90% after storage at 70°F for 5 years
UPC039800095749, 039800109675

Warranty and Support

Energizer is committed to providing high-quality, reliable power solutions. Our batteries are manufactured to rigorous standards to ensure consistent performance.

For specific warranty information or technical support, please refer to the official Energizer website or contact Energizer customer service directly. Keep your purchase receipt as proof of purchase.

You can visit the Energizer Store on Amazon for more product information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.