1. Introduction
This manual provides essential information for the safe and efficient operation, setup, and maintenance of your RIDGID 15682 Model 300 Power Drive Complete Pipe Threading Machine. Please read these instructions thoroughly before operating the machine to ensure proper use and to prevent injury or damage.
The RIDGID Model 300 Power Drive is designed for accurately centering, gripping, and rotating pipe, conduit, and rod to facilitate rapid and efficient cutting, threading, and reaming. It is suitable for both threading and roll grooving applications.
2. Safety Information
WARNING: Always follow all safety precautions to prevent serious injury or death. Read and understand all instructions before use.
- Wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and hearing protection.
- Ensure the work area is clean, well-lit, and free from obstructions.
- Securely anchor the machine and workpiece before operation.
- Keep hands and clothing clear of moving parts.
- Disconnect power before performing any maintenance or adjustments.
- Use only genuine RIDGID replacement parts and accessories.
- Do not operate the machine in wet conditions or in the presence of flammable liquids or gases.
3. Package Contents
The RIDGID 15682 Model 300 Power Drive Complete package includes the following components:
- RIDGID Model 300 Power Drive Machine
- 1206 Stand with integral locking tray and folding legs
- 1452 Clip-on tool tray
- 311 Carriage with lever
- 341 Reamer
- 360 Cutter Assembly (with F-3 wheel and E-1032 cutter wheel)
- 811A 1/8" - 2" NPT Universal, Quick-Opening Die Head, RH
- 47745 - 1/2" - 3/4" Universal Alloy Die Set
- 47750 - 1" - 2" Universal Alloy Die Set
- 418 Oiler with one gallon of premium thread cutting oil
- 32 Transporter (transport wheels)
- Footswitch

4. Setup
The RIDGID Model 300 Power Drive is designed for easy setup and transportation. Follow these steps to prepare your machine for operation:
- Assemble the Stand: Unfold the legs of the 1206 Stand and ensure they are securely locked into place. The stand features an integral locking tray for stability.
- Mount the Machine: Carefully place the Model 300 Power Drive machine onto the stand, ensuring it is stable and properly seated.
- Attach Tool Tray: Secure the 1452 Clip-on tool tray to the stand for convenient access to tools and accessories.
- Install Carriage and Components: Attach the 311 Carriage with lever, 341 Reamer, 360 Cutter, and 811A Die Head to their respective positions on the machine.
- Connect Oiler: Ensure the 418 Oiler is properly connected and filled with premium thread cutting oil.
- Power Connection: Connect the footswitch and power cord to a grounded 115 Volt AC power source.
- Transportation (Optional): For on-job movement, attach the 32 Transporter wheels to the stand.

5. Operating Instructions
The RIDGID Model 300 Power Drive is equipped with a reversible 1/2 HP universal motor, operating at 38 RPM, and a RIDGID speed chuck for efficient pipe processing.
- Secure the Workpiece: Insert the pipe, conduit, or rod into the speed chuck. Ensure it is accurately centered and gripped securely.
- Select Operation: Position the appropriate tool (cutter, reamer, or die head) for the desired operation (cutting, reaming, or threading).
- Adjust Die Head: For threading, select the correct die set (1/2"-3/4" or 1"-2" universal alloy dies) and adjust the 811A quick-opening die head as needed.
- Engage Power: Use the footswitch to activate the motor. The machine features a Forward/Off/Reverse switch for directional control.
- Perform Operation: Guide the carriage to engage the tool with the workpiece. The carriage is designed to securely hold threading tools and glide smoothly on heavy-duty support bars. Ensure continuous lubrication with thread cutting oil during threading.
- Monitor Progress: Observe the process to ensure clean, precise results. The machine's design facilitates quick and efficient cutting, threading, and reaming.
- Disengage Power: Release the footswitch to stop the motor once the operation is complete.


6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your RIDGID Model 300 Power Drive. Always disconnect the machine from the power source before performing any maintenance.
- Cleaning: After each use, clean the machine to remove metal shavings, oil residue, and debris. Use a brush or compressed air.
- Lubrication: Regularly check and replenish the thread cutting oil in the 418 Oiler. Ensure all moving parts are adequately lubricated as per the manufacturer's recommendations.
- Die Head Inspection: Inspect die sets for wear or damage. Replace worn dies to maintain thread quality.
- Cutter Wheel Inspection: Check the cutter wheel for sharpness and damage. Replace if dull or chipped.
- General Inspection: Periodically inspect all cables, connections, and mechanical components for signs of wear, damage, or loose fasteners. Tighten or replace as necessary.
- Storage: Store the machine in a clean, dry environment when not in use.
7. Troubleshooting
This section addresses common issues you might encounter with your RIDGID Model 300 Power Drive. For problems not listed here, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not start | No power supply, faulty footswitch, motor issue | Check power connection, inspect footswitch, contact service if motor is suspected. |
| Poor thread quality | Worn dies, insufficient lubrication, incorrect die adjustment | Replace dies, ensure adequate oil flow, adjust die head correctly. |
| Pipe slips in chuck | Chuck jaws worn or not tightened sufficiently | Ensure pipe is fully inserted and chuck is tightened. Inspect and replace chuck jaws if worn. |
| Excessive vibration/noise | Loose components, worn bearings, unbalanced workpiece | Check all fasteners, inspect bearings, ensure workpiece is properly supported. |
8. Specifications
- Model: 15682
- Brand: RIDGID
- Material: Metal
- Motor: 1/2 HP Universal, Reversible
- Speed: 38 RPM
- Power Source: AC
- Voltage: 115 Volts
- Wattage: 200 watts
- Pipe Threading Capacity: 1/8 inch to 2 inches
- Rod Threading Capacity: 1/4 inch to 2 inches
- Maximum Geared Threader Capacity: 6 inches
- Product Dimensions: 46"L x 24"W x 16.25"H
- Item Weight: 212 Pounds
- UPC: 095691156822
- Manufacturer: Ridgid Tool Company
9. Warranty Information
RIDGID offers a Full Lifetime Warranty for this product. Should your tool ever malfunction from defects in workmanship or materials, RIDGID will repair or replace the tool free of charge. This warranty covers defects in material and workmanship for the life of the product.

10. Customer Support
For technical assistance, parts, or warranty claims, please contact RIDGID customer support. Refer to the official RIDGID website or product packaging for the most current contact information.
Online Resources: Visit the official RIDGID website for product manuals, FAQs, and service center locations.
Contact: Refer to your product registration card or the RIDGID website for specific customer service phone numbers and email contacts.