Introduction
This manual provides instructions for the proper installation, operation, and maintenance of your Atrend Bbox E12S Single Sealed 12 Inch Subwoofer Enclosure. The E12S is a pro-tuned, single sealed wedge-shaped enclosure designed for optimal bass response and low-frequency reproduction, suitable for lower profile sound quality subwoofers. Constructed from durable 3/4 inch thick high-grade MDF, this enclosure features an airtight and resonant-free design to minimize rattles and enhance overall sound quality. Its compact dimensions make it ideal for installations in tight spaces, such as behind or under seats in trucks and SUVs.
Dimensions: Height: 13.5 inches, Width: 15.5 inches, Depth: 9.5 inches.
What's in the Box
- One (1) Atrend Bbox E12S Single Sealed 12 Inch Subwoofer Enclosure
Note: Subwoofer speaker is not included with this enclosure and must be purchased separately.
Setup and Installation
Proper installation is crucial for optimal performance and longevity of your subwoofer enclosure. Follow these steps carefully:
- Unpacking and Inspection: Carefully remove the enclosure from its packaging. Inspect the enclosure for any signs of damage during transit. Ensure the charcoal carpeting is intact and all joints are sealed.
- Subwoofer Selection: Ensure your chosen 12-inch subwoofer is compatible with a sealed enclosure and its mounting depth and volume requirements match the E12S specifications. The enclosure has a maximum mounting depth of 8.00 inches and a net volume per woofer of approximately 0.67 cubic feet.
- Subwoofer Mounting:
- Position the subwoofer into the enclosure's opening.
- Before fastening, it is recommended to pre-drill pilot holes for the subwoofer mounting screws. This prevents splitting the MDF material and ensures a secure fit.
- Secure the subwoofer using appropriate screws, ensuring an even and tight seal around the mounting flange.
- Wiring Connections:
- Locate the red and black spring terminals on the enclosure.
- Connect your amplifier's speaker wires to these terminals. Ensure correct polarity: positive (+) to red, negative (-) to black.
- Verify that all connections are secure and free from shorts.
- Placement in Vehicle:
- The wedge design is optimized for placement in tight spaces such as vehicle trunks, behind truck seats, or in SUV cargo areas.
- Position the enclosure securely to prevent movement during vehicle operation.
Figure 1: Enclosure dimensions and construction details. Note the 9.25" depth, 15.25" width, 13" height, and 11.125" cutout diameter. Max mounting depth is 8.00".
Figure 2: Key features of the enclosure, including high-grade MDF, quality spring terminals, plush charcoal carpeting, and a 1-inch hardwood MDF faceplate.
Operating Instructions
Once the subwoofer is securely mounted and wired within the Atrend Bbox E12S enclosure, connect it to a compatible amplifier. The sealed design of this enclosure is optimized for tight, accurate bass response and efficient low-frequency reproduction. Adjust your amplifier settings (gain, crossover, phase) according to your subwoofer manufacturer's recommendations and your personal audio preferences. Start with low volume and gradually increase to avoid damage to your subwoofer or amplifier.
Figure 3: Example of the subwoofer enclosure installed in a vehicle trunk.
Maintenance
The Atrend Bbox E12S enclosure requires minimal maintenance to ensure its longevity and performance:
- Cleaning: Use a soft brush or vacuum cleaner to remove dust and debris from the charcoal carpeting. For stubborn spots, a damp cloth with mild soap can be used, but avoid saturating the material.
- Inspection: Periodically check the enclosure for any signs of wear, such as loose carpeting, damaged corners, or compromised seals around the subwoofer or terminal cup. Address any issues promptly to maintain acoustic integrity.
- Environmental Conditions: Avoid exposing the enclosure to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture, as these can degrade the MDF and carpeting over time.
Troubleshooting
If you encounter issues with your subwoofer system, consider the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Sound from Subwoofer |
|
|
| Distorted or Poor Sound Quality |
|
|
| Enclosure Rattling |
|
|
For issues specific to your subwoofer or amplifier, refer to their respective instruction manuals.
Specifications
| Feature | Detail |
|---|---|
| Model Number | E12S |
| Speaker Size Compatibility | 12 inches |
| Enclosure Type | Single Sealed, Wedge Shape |
| Enclosure Material | High-Grade 3/4" MDF (Medium-Density Fiberboard) |
| Exterior Finish | Charcoal Carpeting |
| Terminal Type | Red & Black Spring Terminals |
| Item Dimensions (D x W x H) | 9.25"D x 15.25"W x 13"H |
| Net Volume Per Woofer | Approximately 0.67 cubic feet (19 liters) |
| Maximum Mounting Depth | 8.00 inches |
| Item Weight | 14 pounds |
Warranty and Support
This Atrend Bbox E12S Subwoofer Enclosure comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty documentation provided with your purchase or contact Atrend customer support directly.
For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact Atrend customer support through their official website or the contact information provided at the point of purchase.