Introduction
This manual provides essential information for the proper use and maintenance of your Electrolux EFH 12 Original Hygiene Filter. This filter is designed for Electrolux and AEG vacuum cleaner series including Accelerator, AirMax/Green, Bolido, Clario, ClassicSilence, and CycloneXL, as well as compatible Philips models. The EFH 12 filter features HEPA 12 filtering for effective allergen removal, contributing to improved air quality.

Image: Packaging for the Electrolux EFH 12 Original Hygiene Filter, showing compatibility with AEG, Electrolux, Tornado, Volta, and Philips vacuum cleaners.
Setup and Installation
The Electrolux EFH 12 Hygiene Filter is designed for easy installation into compatible vacuum cleaner models. Always ensure your vacuum cleaner is unplugged before attempting any installation or replacement.
- Locate the Filter Compartment: Refer to your vacuum cleaner's specific user manual to identify the location of the HEPA filter compartment. This is typically found near the motor or exhaust vent.
- Remove the Old Filter: Carefully open the filter compartment and remove the old, used filter. Dispose of the old filter responsibly.
- Insert the New Filter: Place the new Electrolux EFH 12 filter into the compartment, ensuring it fits securely and correctly. The filter should sit flush within its designated slot.
- Close the Compartment: Securely close the filter compartment cover.

Image: A side view of the Electrolux EFH 12 filter, highlighting its green frame and pleated white filter material.

Image: An angled view of the Electrolux EFH 12 filter, showing the full surface of the pleated filter material within its green plastic frame.
Installation Video Guide
Video: A demonstration of how to replace a HEPA filter in a compatible vacuum cleaner. This video illustrates the general process of removing an old filter and inserting a new one.
Operation
Once installed, the Electrolux EFH 12 Hygiene Filter operates passively as part of your vacuum cleaner's filtration system. It is designed to capture fine dust particles, pollen, pet dander, and other allergens from the air exhausted by the vacuum, ensuring cleaner air in your home. The HEPA 12 standard indicates a high level of filtration efficiency.
Maintenance
Regular maintenance of your filter is crucial for optimal vacuum cleaner performance and air quality. The Electrolux EFH 12 filter is a disposable hygiene filter and should be replaced periodically.
- Replacement Frequency: It is recommended to replace the filter approximately every six months, or more frequently if the vacuum cleaner is used heavily or in environments with high dust and allergen levels.
- Signs of a Clogged Filter: Indicators that your filter may need replacement include reduced suction power, a noticeable decrease in air quality after vacuuming, or a visible accumulation of dirt and debris on the filter surface.
- Disposal: Dispose of used filters according to local waste disposal guidelines.
Troubleshooting
If you experience issues with your vacuum cleaner's performance related to filtration, consider the following:
- Reduced Suction: A common cause of reduced suction is a clogged filter. If your vacuum cleaner is losing suction, check the EFH 12 filter and replace it if it appears dirty or blocked.
- Unpleasant Odors: Old, dirty filters can sometimes contribute to unpleasant odors during vacuuming. Replacing the filter can help eliminate these odors.
- Dusty Exhaust Air: If you notice dust or fine particles being expelled from your vacuum's exhaust, the filter may be compromised or improperly installed. Ensure the filter is correctly seated and replace it if damaged.
Always ensure the filter compartment is securely closed after checking or replacing the filter to maintain proper vacuum seal and filtration efficiency.
Specifications
| Feature | Detail |
|---|---|
| Brand | Electrolux |
| Model Name | EFH 12 (W7-54400) |
| Part Number | EFH 12 |
| Filter Type | HEPA Filter |
| Special Feature | HEPA 12 filtering, allergen removal |
| Material | Paper |
| Item Weight | 3.17 ounces |
| Compatible with | Electrolux/AEG vacuum cleaner series (Accelerator, AirMax/Green, Bolido, Clario, ClassicSilence, CycloneXL), Philips vacuum cleaners. Also compatible with specific models: 9001954123, 907170801, Z5045, 907171001, Z5040, 907176601, Z5145, EXCELLIOZ5140. |
Warranty Information
Electrolux provides a commitment to spare part availability. For the EFH 12 filter, the EU Spare Part Availability Duration is 5 Years. This indicates the period during which replacement parts are expected to be available. For specific warranty terms and conditions applicable to your region, please refer to the documentation provided with your vacuum cleaner or contact Electrolux customer support.
Customer Support
If you have any questions regarding the Electrolux EFH 12 Original Hygiene Filter, its compatibility, installation, or maintenance, please contact Electrolux customer support. You can typically find contact information on the official Electrolux website or in the user manual of your specific vacuum cleaner model.
For more information, visit the official Electrolux store: Electrolux Store on Amazon.





