Eveready CR2025 3V Lithium Coin Cell Battery Instruction Manual

1. Introduction

This manual provides essential information for the safe and effective use of Eveready CR2025 3V Lithium Coin Cell Batteries. These batteries are designed to provide reliable power for various small electronic devices, including watches, calculators, remote controls, and other specialty electronics. Please read this manual thoroughly before use and retain it for future reference.

2. Safety Information

Improper use of batteries can result in leakage, heat generation, fire, or explosion, leading to personal injury or device damage. Observe the following safety precautions:

• Keep out of reach of children: Coin cell batteries can be swallowed. If ingested, seek immediate medical attention.
• Do not recharge: These batteries are not rechargeable. Attempting to recharge them may cause leakage, fire, or explosion.
• Do not disassemble or modify: Disassembling, crushing, puncturing, or otherwise modifying the battery can lead to internal short-circuiting, leakage, or explosion.
• Do not expose to heat: Avoid exposing batteries to high temperatures, direct sunlight, or fire. Do not incinerate.
• Do not short-circuit: Do not allow metal objects to contact both positive (+) and negative (-) terminals simultaneously, as this can cause heat generation and damage.
• Insert correctly: Ensure correct polarity (+ and -) when installing batteries into a device. Incorrect insertion can cause damage.
• Store properly: Store batteries in their original packaging in a cool, dry place until ready for use.
• Avoid mixing: Do not mix new and used batteries, or batteries of different types or brands.
• Leakage: If battery leakage occurs, avoid contact with skin and eyes. If contact occurs, flush immediately with water and seek medical attention.

3. Setup and Installation

Follow these general steps for installing Eveready CR2025 batteries:

1. Consult Device Manual: Always refer to your device's instruction manual for specific battery installation procedures and requirements.
2. Open Battery Compartment: Locate and open the battery compartment on your device. This may require a small screwdriver or a specific tool.
3. Remove Old Batteries (if applicable): Carefully remove any old batteries, noting their orientation.
4. Insert New Battery: Insert the new Eveready CR2025 battery, ensuring the positive (+) side faces the direction indicated in the device's compartment (usually upwards or as marked). The negative (-) side is typically the flat, unmarked side.
5. Close Compartment: Securely close the battery compartment.
6. Test Device: Power on your device to confirm proper installation and functionality.

Image 1: Eveready CR2025 3V Lithium Coin Cell Batteries in original packaging. This image shows the product as it appears when purchased, containing two CR2025 batteries.

4. Operating and Usage

Eveready CR2025 batteries are designed for immediate use upon installation. They provide a stable 3-volt power supply for compatible devices.

• Device Compatibility: Ensure your device specifically requires CR2025 batteries. Using an incorrect battery type can damage the device or prevent it from functioning.
• Expected Lifespan: Battery life varies depending on the device's power consumption and usage patterns. Replace batteries when device performance declines.
• Storage Life: These batteries are designed to hold power for an extended period in storage.

Image 2: Eveready CR2025 batteries demonstrating their long storage life. The image highlights the battery's ability to retain power for up to 8 years when stored correctly.

Image 3: Eveready CR2025 batteries powering various specialty devices. This image illustrates common applications for these batteries, such as watches, remote controls, and medical devices.

5. Maintenance

• Storage: Store unused batteries in their original packaging in a cool, dry place, away from direct sunlight and extreme temperatures.
• Contact Cleaning: If necessary, gently clean battery contacts in your device with a dry cloth to ensure optimal conductivity. Do not use liquids or abrasive materials.
• Temperature Performance: These batteries are designed to perform across a range of temperatures.

Image 4: Eveready CR2025 battery illustrating performance in extreme temperatures. The graphic indicates the battery's operational range from -22°F to 140°F.

6. Troubleshooting

If your device is not functioning after battery installation, consider the following:

• Check Polarity: Ensure the battery is inserted with the correct positive (+) and negative (-) orientation.
• Verify Battery Type: Confirm that your device requires a CR2025 battery.
• Inspect Contacts: Check for any corrosion or debris on the battery contacts within the device and on the battery itself. Clean if necessary.
• Test with New Battery: If possible, try a different new battery to rule out a faulty battery.
• Device Malfunction: If the issue persists, the problem may lie with the device itself, not the battery. Consult your device's manual or manufacturer.

7. Specifications

8. Disposal

Proper disposal of used batteries is crucial for environmental protection and safety. Do not dispose of batteries in household waste.

• Recycle: Many communities offer battery recycling programs. Check with your local waste management facility for recycling options.
• Insulate Terminals: Before disposal, it is recommended to cover the battery terminals with tape to prevent short-circuiting.
• Do Not Incinerate: Never burn batteries, as this can cause them to explode.

9. Warranty and Support

For warranty information or product support, please refer to the official Eveready website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

Note: Specific warranty terms may vary by region and retailer.