1. Introduction
This manual provides essential information for the proper use and care of your VOX VGS-30 Rock Guitar/Bass Guitar Cable. Designed for connecting electric guitars or bass guitars to amplifiers, effects pedals, or other audio equipment, this cable ensures reliable signal transmission and durability. Please read this manual thoroughly to ensure optimal performance and longevity of your cable.
2. Features
- Length: 9.8 feet (3 meters) for ample reach.
- Conductors: Multi-gauge conductors optimize performance across all frequencies.
- Core Material: Oxygen-free copper core enhances signal clarity.
- Shielding: Dual-layer shielding minimizes electromagnetic interference, reducing noise and hum.
- Jacket: Durable PVC jacket resists abrasion.
- Connectors: Precision-machined 1/4" TS connectors (one straight, one angled) for maximum conductivity.
- Plugs: Gold-plated plugs prevent corrosion.
- Design: Specifically designed for electric guitars and bass guitars to maintain dynamic and consistent sound.
- Construction: Flexible yet sturdy construction allows for easy coiling and storage.
3. Setup
The VOX VGS-30 cable is designed for straightforward connection between your instrument and audio equipment.
- Identify Connectors: The cable features one straight 1/4" TS connector and one angled (L-shaped) 1/4" TS connector.
- Connect to Instrument: Insert either the straight or angled connector into the output jack of your electric guitar or bass guitar. The angled connector is often preferred for instruments with side-mounted jacks to reduce strain and keep the cable close to the instrument body.
- Connect to Equipment: Insert the remaining connector into the input jack of your amplifier, audio interface, or effects pedal. Ensure a firm connection at both ends.
- Cable Routing: Route the cable safely to avoid tripping hazards and excessive bending or kinking, which can damage the internal wiring.
Image 1: The VOX VGS-30 cable, coiled, showing both the straight and angled 1/4" TS connectors. This image illustrates the overall design and connector types.
Image 2: A close-up view of the straight and angled 1/4" TS connectors of the VOX VGS-30 cable, highlighting their design and gold-plated tips.
4. Operating
Once connected, the VOX VGS-30 cable functions as a passive signal conduit. No specific operational steps are required beyond ensuring secure connections.
- Signal Flow: The cable transmits the audio signal from your instrument to the connected device.
- Volume Control: Adjust volume and tone settings on your instrument and amplifier as usual.
- Unplugging: Always grasp the connector housing, not the cable itself, when plugging or unplugging to prevent damage to the internal wiring and connections.
5. Maintenance
Proper maintenance will extend the life and performance of your cable.
- Cleaning: Wipe the cable jacket with a soft, dry cloth to remove dust and dirt. For connectors, use a clean, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Storage: Coil the cable loosely when not in use. Avoid tight coiling, sharp bends, or kinks, which can damage the internal conductors. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspection: Periodically inspect the cable and connectors for any signs of wear, fraying, or damage.
6. Troubleshooting
If you experience issues with your cable, consider the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or intermittent signal | Loose connection, damaged cable, faulty instrument/amp jack | Ensure connectors are fully inserted. Test with another known-good cable. Check instrument and amplifier jacks. |
| Hum or buzzing noise | Electromagnetic interference, ground loop, damaged shielding | Ensure cable is not near power cables or other sources of interference. Test with another cable. Check grounding of equipment. |
| Distorted or weak signal | Damaged cable, corroded connectors | Inspect cable for visible damage. Clean connectors. Test with another cable. |
7. Specifications
| Specification | Detail |
|---|---|
| Model Number | VXKVGS30 |
| Brand | VOX |
| Product Dimensions | 9.17 x 5.71 x 2.76 inches; 6.7 ounces (packaged) |
| Connector Type | 1/4" TS (Tip-Sleeve), one straight, one angled |
| Cable Type | Instrument Cable |
| Compatible Devices | Electric Guitar, Bass Guitar |
| Special Feature | Guitar Shielding |
8. What's in the Box
- VOX VGS-30 Rock Guitar/Bass Guitar Cable (10ft / 3m)
Image 3: The VOX VGS-30 cable displayed within its transparent retail packaging, showing the brand logo and product details.
9. Warranty and Support
For warranty information or technical support, please refer to the official VOX website or contact your authorized VOX dealer. Keep your purchase receipt as proof of purchase.
