Eliminator Lighting DMX DJ Controller Instruction Manual

Introduction

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Eliminator Lighting DMX DJ Controller. Please read this manual thoroughly before operating the device to ensure proper use and to maximize its performance and longevity.

Figure 1: Front view of the Eliminator Lighting DMX DJ Controller, showcasing its various controls including faders, buttons, and display.

Important Safety Information

Always follow basic safety precautions when using this product to reduce the risk of fire, electric shock, and personal injury. Keep this manual for future reference.

• Ensure the power source matches the voltage requirements specified for the controller.
• Do not expose the unit to rain or moisture.
• Do not operate the unit if the power cord is damaged.
• Refer all servicing to qualified service personnel.
• Avoid blocking ventilation openings.

Setup

1. Unpacking

Carefully remove the DMX DJ Controller from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. Contact your dealer immediately if any damage is found.

2. Placement and Mounting

The DMX DJ Controller is designed for rack mounting or desktop use. Ensure the unit is placed on a stable, flat surface or securely mounted in a standard 19-inch equipment rack. Allow adequate ventilation around the unit to prevent overheating.

Figure 2: Angled view of the DMX DJ Controller, showing its rack-mountable design and control layout.

3. Power Connection

Connect the provided power adapter to the DC 9V input on the rear of the controller. Plug the adapter into a suitable power outlet. The unit requires 9 Volts (DC) power.

4. DMX Connection

Connect a standard 3-pin DMX cable from the DMX OUT port on the controller to the DMX IN port of your first DMX-compatible lighting fixture. Daisy-chain additional DMX fixtures by connecting the DMX OUT of the first fixture to the DMX IN of the next, and so on. Ensure all DMX addresses on your fixtures are correctly set according to their respective manuals.

Operating Instructions

The DMX DJ Controller is designed to control up to 12 DMX fixtures, each with up to 16 DMX channels. It features 30 banks of 8 programmable scenes and 6 programmable chases.

Control Panel Overview

Figure 3: Detailed view of the DMX DJ Controller's control surface, highlighting faders, scene buttons, and function buttons.

• SCANNERS (1-12): Buttons to select individual DMX fixtures for control.
• SCENES (1-8): Buttons to select or program individual scenes within a bank.
• FADERS (1-8): Manual control over DMX channels. Use PAGE SELECT to access channels 9-16.
• PAGE SELECT (A/B): Toggles fader control between DMX channels 1-8 (Page A) and 9-16 (Page B).
• PROGRAM: Enters/exits programming mode for scenes and chases.
• CHASE (1-6): Buttons to select or program individual chases.
• AUTO/DEL: Activates automatic chase playback or deletes programmed elements.
• MUSIC/BANKCOPY: Activates sound-active mode via the built-in microphone or copies scene banks.
• TAP/DISPLAY: Adjusts chase speed in auto mode or changes display information.
• BLACKOUT: Instantly turns off all DMX output.
• FADE TIME: Fader to adjust the fade time between scenes or steps in a chase.
• SPEED: Fader to adjust the speed of chases.

Programming Scenes

1. Press the PROGRAM button to enter programming mode. The PROGRAM LED will flash.
2. Select the desired SCANNER(s) (1-12) you wish to program.
3. Adjust the FADERS (1-8, use PAGE SELECT for 9-16) to set the desired DMX values for the selected fixtures.
4. Press the SCENE button (1-8) where you want to save the scene. The PROGRAM LED will flash rapidly to confirm.
5. Repeat for other scenes. Press PROGRAM again to exit programming mode.

Running Scenes and Chases

To run a scene, ensure you are not in PROGRAM mode, then select the desired BANK (using the Bank Up/Down buttons, if available, or by selecting a scene within a bank) and press the corresponding SCENE button (1-8).

To run a chase:

1. Press the CHASE button (1-6) you wish to activate.
2. Adjust the SPEED and FADE TIME faders to achieve the desired effect.
3. Press AUTO/DEL for automatic playback, or MUSIC/BANKCOPY for sound-activated playback.

Maintenance

Cleaning

Regularly clean the exterior of the controller with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the unit is powered off and disconnected from the power source before cleaning.

Storage

When not in use for extended periods, store the controller in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to keep the original packaging for storage and transport.

Troubleshooting

If you encounter issues not covered here, please contact customer support for assistance.

Specifications

• Model: DMX DJ
• Brand: Eliminator Lighting
• Product Dimensions: 60.96 x 20.32 x 15.24 cm (24 x 8 x 6 inches)
• Item Weight: 2.27 kg (5 lbs)
• Material Type: Metal
• Power Source: Corded Electric
• Voltage: 9 Volts (DC)
• DMX Channels: Controls up to 12 fixtures, each with up to 16 DMX channels
• Scenes: 30 banks of 8 programmable scenes
• Chases: 6 programmable chases
• Features: Built-in microphone for music triggering, Fade Time control, Speed control, Blackout function.

Warranty and Support

Warranty Information

This Eliminator Lighting DMX DJ Controller comes with a 1-Year Limited Warranty from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use. Please retain your proof of purchase for warranty claims.

Customer Support

Eliminator Lighting is committed to providing user-friendly, real-live customer support. For technical assistance, troubleshooting, or warranty inquiries, please contact our friendly and helpful customer support hotline. Our support team is based in Los Angeles and has over 30 years of experience in the lighting industry.

For the most current contact information, please visit the official Eliminator Lighting website or refer to your purchase documentation.