Lumex Silver Collection Steel Drop Arm 3-in-1 Commode

1. Product Overview

The Lumex Silver Collection Steel Drop Arm 3-in-1 Commode is a versatile medical aid designed for use as a bedside commode, a raised toilet seat, or a toilet safety frame. Its durable, welded-steel frame ensures strength and stability, while the powder-coated finish allows for easy cleaning. The commode features an easy-to-release drop arm mechanism for safe lateral transfers and cushioned armrests for enhanced user comfort. It is designed to accommodate most users with a maximum weight capacity of 300 pounds.

Image: The Lumex Silver Collection Steel Drop Arm 3-in-1 Commode, shown with its seat and commode pail.

Key Features:

• 3-in-1 Versatility: Functions as a bedside commode, raised toilet seat, or toilet safety frame.
• Heavy-Duty Construction: Durable welded steel frame with a 300 lbs weight capacity.
• Drop Arm Mechanism: Arms drop independently for easy lateral transfers.
• Adjustable Height: Seat height adjusts from 18.75 inches to 22.75 inches in 1-inch increments.
• Comfort and Hygiene: Cushioned armrests, sturdy plastic seat, and easy-to-clean powder-coated frame.
• Complete Set: Includes commode pail, lid, and splash shield.

2. What's in the Box

Upon unpacking, please ensure all components are present and undamaged. The package for the Lumex Silver Collection Steel Drop Arm 3-in-1 Commode (Model 6433A-2) should contain the following:

• Commode Frame (pre-assembled main structure)
• Commode Seat with Lid
• Commode Pail
• Splash Shield
• Instruction Manual (this document)

Image: Two Lumex Silver Collection Steel Drop Arm 3-in-1 Commodes, illustrating the product as a pack of two.

3. Setup and Assembly

The Lumex Silver Collection 3-in-1 Commode comes largely pre-assembled. Follow these steps for final setup and adjustment:

1. Unfold the Frame: Carefully unfold the commode frame until it locks securely into place. Ensure all four legs are stable on the floor.
2. Adjust Height: To adjust the seat height, locate the push-pins on each leg. Press the pin and slide the leg up or down to the desired height. Ensure all four legs are adjusted to the same height and the pins are securely engaged in the adjustment holes. The seat height can be adjusted from 18.75 inches to 22.75 inches.
3. Attach Seat and Lid: Place the plastic commode seat onto the frame. It should snap securely into place. Attach the lid to the seat.
4. Insert Commode Pail and Splash Shield: For bedside commode use, insert the commode pail into the frame beneath the seat. For use as a raised toilet seat or toilet safety frame over an existing toilet, remove the commode pail and insert the splash shield.
5. Check Armrests: Ensure the cushioned armrests are securely in place. The drop arm mechanism allows the arms to be lowered for easier transfers. To lower an arm, press the release button (if present, or follow specific mechanism instructions) and gently guide it down. To raise, lift the arm until it locks into position.

Image: A side view of the Lumex Silver Collection 3-in-1 Commode, highlighting its adjustable legs and drop arm feature.

4. Operating Instructions

The Lumex 3-in-1 Commode offers three primary modes of operation:

4.1. As a Bedside Commode

1. Ensure the commode is placed on a flat, stable surface next to the bed.
2. Verify that the commode pail is correctly inserted beneath the seat.
3. For transfers, lower the armrest closest to the bed by pressing the release button and gently guiding it down.
4. Assist the user to sit on the commode.
5. After use, replace the lid on the commode pail.
6. Empty and clean the commode pail as described in the Maintenance section.

4.2. As a Raised Toilet Seat

1. Remove the commode pail from the frame.
2. Insert the splash shield into the frame.
3. Position the commode over an existing toilet, ensuring the legs are stable and the commode is centered.
4. Adjust the height of the commode legs so that the seat is at a comfortable and safe height above the toilet bowl.
5. Ensure the back bar is securely attached or detached as needed to fit over the toilet.

4.3. As a Toilet Safety Frame

1. Detach the back bar of the commode frame. This allows the frame to be positioned around an existing toilet without the backrest.
2. Remove the commode seat, lid, and pail/splash shield. The frame will now act as support arms around the toilet.
3. Position the frame around the toilet, ensuring it is stable and the armrests provide adequate support for the user to push up or lower themselves.
4. Adjust the height of the legs to match the height of the toilet for optimal support.

5. Maintenance and Cleaning

Regular cleaning and maintenance will ensure the longevity and hygienic use of your Lumex Commode.

• Daily Cleaning: After each use, empty the commode pail and clean it thoroughly with a mild disinfectant and water. Rinse well and dry.
• Frame Cleaning: Wipe down the steel frame and plastic seat with a damp cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive pads that could damage the powder-coated finish.
• Inspection: Periodically inspect all nuts, bolts, and fasteners to ensure they are tight. Check the rubber tips on the legs for wear and replace if necessary to maintain stability.
• Storage: When not in use, store the commode in a dry place away from direct sunlight or extreme temperatures.

6. Troubleshooting

If you encounter any issues with your commode, please refer to the following common solutions:

• Instability/Wobbling:
  • Ensure all four legs are adjusted to the same height and the push-pins are fully engaged.
  • Verify that the commode is placed on a flat, even surface.
  • Check all frame connections and tighten any loose bolts.
• Difficulty with Drop Arms:
  • Ensure the release mechanism is fully pressed.
  • Check for any obstructions preventing smooth movement.
  • Apply a small amount of silicone spray to the pivot points if movement is stiff (avoiding contact with seating surfaces).
• Seat Not Snapping On:
  • Align the seat properly with the frame's attachment points.
  • Apply firm, even pressure until it clicks into place.

If problems persist, please contact customer support.

7. Specifications

8. Safety Information

Please read and understand all safety warnings before using this product. Failure to do so could result in injury.

• Always ensure the commode is placed on a level, stable surface before use.
• Verify that all leg adjustment pins are fully engaged and secure before applying weight.
• Do not exceed the maximum weight capacity of 300 lbs.
• Ensure the user is properly seated and stable before leaving them unattended.
• Regularly inspect the commode for any signs of wear, damage, or loose components. Do not use if damaged.
• Keep the commode clean and dry to prevent slips and maintain hygiene.
• Use caution when transferring to and from the commode. Seek assistance if needed.

9. Warranty and Support

For warranty information, technical support, or to order replacement parts, please contact Graham-Field customer service.

• Manufacturer: GF Health Products, Inc.
• Contact Number: 770-368-4700
• Website: www.grahamfield.com (Please note: This link is an example, actual website may vary. Refer to product packaging for official contact details.)

Please have your model number (6433A-2) and purchase date available when contacting support.