Satco S6703

Satco CF7DS/835 - S6703 Compact Fluorescent Light Bulb User Manual

Model: S6703 | Brand: Satco

Introduction

This manual provides essential information for the safe and efficient use of your Satco CF7DS/835 - S6703 Compact Fluorescent Light Bulb. Please read this manual thoroughly before installation and retain it for future reference.

Safety Information

Always observe the following safety precautions:

  • WARNING: Risk of electric shock. Disconnect power before installation, removal, or inspection.
  • Do not use with dimmers unless specifically rated for CFLs.
  • Do not use in totally enclosed luminaires unless specifically rated for such use.
  • Avoid touching the glass portion of the bulb with bare hands. Use a clean cloth or gloves.
  • If the bulb breaks, ventilate the room for 15 minutes and carefully clean up the broken glass and mercury using disposable gloves and a stiff piece of paper or cardboard. Do not use a vacuum cleaner.
  • Dispose of broken bulbs and used bulbs according to local regulations for hazardous waste.

Product Overview

The Satco CF7DS/835 - S6703 is a 7-watt, pin-based compact fluorescent light bulb designed for general illumination. It features a G23 base and emits a 3500K light, providing a neutral white light suitable for various applications.

Satco CF7DS/835 - S6703 Compact Fluorescent Light Bulb

This image displays the Satco CF7DS/835 - S6703 compact fluorescent light bulb, showing its elongated, U-shaped glass tube and the G23 pin base at the bottom.

Key features include:

  • 7 Watt power consumption
  • G23 Pin Base for secure connection
  • 3500 Kelvin color temperature (Neutral White)
  • 82 CRI (Color Rendering Index) for accurate color perception

Setup and Installation

Follow these steps to properly install your compact fluorescent light bulb:

  1. Ensure Power is Off: Before attempting any installation, turn off the power to the fixture at the circuit breaker or wall switch.
  2. Identify Compatible Fixture: Verify that your light fixture is designed for G23 base compact fluorescent bulbs and has the correct wattage rating.
  3. Insert Bulb: Align the two pins on the G23 base of the bulb with the corresponding slots in the fixture's socket. Gently push the bulb into the socket until it is firmly seated. Do not force the bulb.
  4. Restore Power: Once the bulb is securely installed, restore power to the fixture.
  5. Test: Turn on the light switch to confirm the bulb is functioning correctly.

Note: If replacing an existing bulb, allow the old bulb to cool completely before removal.

Operating Instructions

The Satco CF7DS/835 - S6703 operates like a standard light bulb. Once installed in a compatible fixture with power supplied, it will illuminate when the fixture's switch is turned on.

  • Initial Warm-up: Compact fluorescent bulbs may take a few moments to reach full brightness, especially in colder environments. This is normal operation.
  • Switching Cycles: Frequent switching (turning on and off rapidly) can reduce the lifespan of CFLs. It is recommended to leave the bulb on for a reasonable period once illuminated.

Maintenance

Minimal maintenance is required for your Satco CFL bulb.

  • Cleaning: Ensure the power is off and the bulb is cool before cleaning. Gently wipe the glass with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials.
  • Replacement: Replace the bulb when it reaches the end of its lifespan or if it becomes damaged. Follow the "Setup and Installation" steps for safe removal and replacement.

Troubleshooting

If your Satco CF7DS/835 - S6703 bulb is not functioning, consider the following common issues:

ProblemPossible CauseSolution
Bulb does not light up.
  • No power to the fixture.
  • Bulb not properly seated.
  • Bulb has reached end of life.
  • Fixture or wiring issue.
  • Check circuit breaker and wall switch.
  • Ensure bulb is firmly inserted into the socket.
  • Replace the bulb with a new one.
  • Consult a qualified electrician if other solutions fail.
Bulb flickers.
  • Incompatible dimmer switch.
  • Loose connection.
  • Bulb nearing end of life.
  • Ensure fixture is not on a dimmer not rated for CFLs.
  • Check bulb seating; re-insert if necessary.
  • Replace the bulb.

Specifications

Detailed technical specifications for the Satco CF7DS/835 - S6703 Compact Fluorescent Light Bulb:

  • Model: S6703
  • Brand: Satco
  • Light Type: Fluorescent
  • Wattage: 7 watts
  • Bulb Base: G23
  • Color Temperature: 3500 Kelvin (Neutral White)
  • Brightness: 400 Lumen
  • Color Rendering Index (CRI): 82
  • Product Dimensions: 1.25"W x 5.31"H
  • Item Weight: 1 pounds
  • Unit Count: 1 Count
  • UPC: 046135203107

Warranty and Support

Specific warranty information for the Satco CF7DS/835 - S6703 is not provided within this manual. For warranty details, technical support, or further inquiries, please refer to the official Satco website or contact their customer service directly.

You may find additional information on the manufacturer's website: www.satco.com

© 2023 Satco. All rights reserved.

This manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.