1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Tiger Lights Out Handheld Game. Please read this manual thoroughly before using the device to ensure proper functionality and an optimal gaming experience. The Tiger Lights Out game, originally released in 1995, challenges players to solve a grid-based puzzle by strategically toggling lights.
2. Setup
2.1 Battery Installation
- Locate the battery compartment on the back of the game unit.
- Using a small screwdriver (not included), carefully remove the screw securing the battery compartment cover.
- Remove the cover.
- Insert 4 AA batteries (not included) into the compartment, ensuring correct polarity (+/-) as indicated inside the compartment.
- Replace the battery compartment cover and secure it with the screw.
The battery compartment is located on the back of the device. It is secured by a small screw. Once opened, four AA batteries should be inserted according to the polarity markings. Ensure the cover is securely fastened after battery installation.
This image displays the battery compartment in an open state, clearly showing the four slots for AA batteries and the polarity indicators. Proper battery placement is crucial for the device to function.
3. Operating Instructions
3.1 Game Objective
The primary objective of the Lights Out game is to turn off all the lights on the 5x5 grid. Each game begins with a unique pattern of illuminated lights.
3.2 Basic Gameplay
The game features a grid of 25 buttons, each representing a light. When a button is pressed, it toggles its own light and the lights of all directly adjacent buttons (up, down, left, and right). The challenge lies in determining the correct sequence of button presses to extinguish all lights on the grid.
3.3 Controls
This image displays the front of the Tiger Lights Out game, highlighting the grid of purple buttons and the control panel on the right side.
- ON/OFF Button: Located on the top right of the control panel. Press to power the game on or off.
- START Button: Initiates a new game or restarts the current puzzle.
- SOUND Button: Toggles the game's sound effects on or off.
- HELP Button: Provides a hint or solution depending on the game mode. Refer to the game's internal instructions for specific help functionality.
- SELECT Button: Used for navigating menus or confirming selections in certain game modes.
- Grid Buttons (25 Purple Buttons): These are the primary interactive elements. Pressing any of these buttons will toggle its own light and the lights of its immediate neighbors (up, down, left, right).
4. Specifications
- Product Dimensions: 5.71 x 4.21 x 1.61 inches
- Item Weight: 4.8 ounces
- Manufacturer Recommended Age: 4 years and up
- Batteries: 4 AA batteries required (not included)
- Manufacturer: Tiger Electronics
- ASIN: B000UHABZC
5. Troubleshooting
- Game does not turn on: Ensure that 4 fresh AA batteries are correctly installed with the proper polarity. If the issue persists, try replacing the batteries with new ones.
- No sound: Press the SOUND button to toggle sound effects. If still no sound, check battery levels.
- Buttons unresponsive: Ensure the game is powered on. If specific buttons are unresponsive, gently clean around the buttons. If the problem continues, the unit may require service.
- Game freezes or behaves erratically: Turn the game off and then on again to perform a soft reset. If the issue persists, remove and reinsert the batteries.
6. Warranty and Support
For information regarding warranty coverage, technical support, or service inquiries, please refer to the original product packaging or contact Tiger Electronics customer service directly. Contact details may vary based on your region and the product's age. Please retain your proof of purchase for any warranty claims.
