Leviton 87011 3-Gang Toggle Device Switch Wallplate User Manual

Introduction

This manual provides essential information for the installation, maintenance, and general use of your Leviton 87011 3-Gang Toggle Device Switch Wallplate. Designed for use with traditional Leviton devices, this wallplate offers a clean, functional aesthetic suitable for various residential and commercial applications. Please read these instructions carefully before proceeding with installation.

Product Overview

The Leviton 87011 is a standard-size, 3-gang toggle device switch wallplate constructed from durable thermoset material. Its design features a smooth face and rounded edges, which contribute to its resistance against dust accumulation. The material is also resistant to fading, discoloration, grease, oil, organic solvents, and moisture scratches, ensuring long-lasting appearance and performance. It is designed for high dielectric strength and arc resistance, meeting Underwriter Laboratories (UL) and Canadian Standards Association (CSA) certifications.

Figure 1: Front view of the Leviton 87011 3-Gang Toggle Device Switch Wallplate. This image displays the gray wallplate with three rectangular openings for toggle switches and six screw holes for mounting.

Setup and Installation

Installation of the Leviton 87011 wallplate is straightforward. Ensure all power to the electrical box is turned off at the circuit breaker before beginning any electrical work.

1. Safety First: Before touching any electrical components, verify that the power is off using a voltage tester.
2. Remove Old Wallplate (if applicable): Carefully unscrew and remove the existing wallplate from the electrical box.
3. Install Devices: Ensure your toggle switches or other compatible devices are properly installed and secured within the electrical box.
4. Position New Wallplate: Align the Leviton 87011 wallplate over the installed devices, ensuring the openings match the toggles.
5. Secure Wallplate: Insert the provided mounting screws into the designated holes on the wallplate and gently tighten them. Do not overtighten, as this can crack the wallplate or strip the screw threads.
6. Restore Power: Once the wallplate is securely installed, restore power at the circuit breaker.

If you are unsure about any step, consult a qualified electrician.

Operating Instructions

The Leviton 87011 wallplate is a passive component designed to cover and protect electrical wiring and devices. It does not have operational functions itself. Its purpose is to provide a finished appearance and safety barrier for the toggle switches installed beneath it.

Maintenance

To ensure the longevity and appearance of your wallplate, follow these simple maintenance guidelines:

• Cleaning: Wipe the wallplate with a soft, damp cloth. For stubborn marks, a mild soap solution can be used. Avoid abrasive cleaners, harsh chemicals, or solvents, as these can damage the finish or material.
• Dust Accumulation: The smooth surface is designed to resist dust. Regular light dusting will keep it clean.
• Inspection: Periodically check the wallplate for any signs of damage, cracks, or loose screws. If damage is observed, replace the wallplate. Ensure mounting screws remain snug; retighten gently if necessary.

Troubleshooting

Most issues with a wallplate are minor and easily resolved.

• Wallplate is Loose: Gently tighten the mounting screws. Do not overtighten. If the screws do not hold, the electrical box or device mounting tabs may be damaged, requiring professional attention.
• Wallplate Appears Damaged/Cracked: If the wallplate is cracked during installation (often due to overtightening) or shows signs of damage, it should be replaced immediately to maintain safety and appearance.
• Discoloration/Fading: While the wallplate is resistant to fading and discoloration, extreme exposure to UV light or harsh chemicals over extended periods could potentially affect its finish. Ensure proper cleaning methods are used.

Specifications

Warranty Information

The Leviton 87011 3-Gang Toggle Device Switch Wallplate comes with a 2 Year Limited Warranty. For detailed terms and conditions, please refer to the official Leviton warranty documentation or contact Leviton customer support.

Support and Contact

For further assistance, technical support, or warranty claims, please contact Leviton customer service. Visit the official Leviton website for contact information and additional resources.

Leviton Official Website: www.leviton.com