Moen TS214

Moen Waterhill Two-Handle High Arc Roman Tub Faucet

Model: TS214 | Brand: Moen

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Moen Waterhill Two-Handle High Arc Roman Tub Faucet. The intricate charm of the Waterhill series is designed to add character and enrich your home's aesthetic. Please read this manual thoroughly before beginning installation or operation to ensure proper function and longevity of your product.

Key Features

  • Chrome Finish: Creates a bright, highly reflective, cool grey metallic look.
  • Two-Handle Lever Design: For ease of use and precise control of water temperature and flow.
  • Rotating Spout: Features a locking mechanism for versatile positioning.
  • M-PACT Common Valve System: Designed for easy future upgrades without replacing plumbing.

Safety Information

Always turn off the main water supply before installing or servicing the faucet. Wear appropriate personal protective equipment, such as safety glasses, during installation. If you are unsure about any part of the installation process, consult a qualified plumber.

Package Contents

Verify that all components are present before beginning installation.

  • Moen Waterhill Two-Handle High Arc Roman Tub Faucet (TS214)
  • Mounting Hardware
  • Installation Instructions

Note: Moen valves (Valve No. 4992 or 4993) are NOT included and are required for operation. These must be purchased separately.

Installation Guide

1. Pre-Installation

  • Ensure main water supply is turned off.
  • Clear the installation area.
  • Gather all necessary tools: adjustable wrench, plumber's putty, silicone sealant, screwdriver, tape measure.
  • Confirm you have the required Moen valve (4992 or 4993) for your specific setup.

2. Faucet Assembly and Mounting

  1. Install the Moen M-PACT valve body (sold separately) according to its specific instructions.
  2. Apply a thin bead of plumber's putty or silicone sealant around the base of the faucet spout and handles.
  3. Insert the faucet spout and handle assemblies through the mounting holes on the tub deck.
  4. From underneath the tub deck, secure the faucet and handles using the provided mounting nuts and washers. Tighten firmly but do not overtighten.

3. Water Supply Connections

  1. Connect the hot and cold water supply lines to the corresponding inlets on the valve body. Use an adjustable wrench to tighten connections, ensuring no leaks.
  2. Ensure all connections are secure before turning on the water supply.

4. Final Steps

  1. Turn on the main water supply slowly and check for any leaks.
  2. Remove the aerator from the spout and flush the faucet for a few minutes to clear any debris from the lines. Reinstall the aerator.
  3. Test the hot and cold water flow and temperature control.
Moen Waterhill Roman Tub Faucet in Chrome

Figure 1: Moen Waterhill Two-Handle High Arc Roman Tub Faucet (TS214) in Chrome finish, showing the spout and two lever handles.

Operation

The Moen Waterhill faucet features two lever handles for independent control of hot and cold water. Turn the left handle counter-clockwise for hot water and the right handle counter-clockwise for cold water. Adjust both handles to achieve the desired water temperature and flow. The high arc spout can be rotated for convenience and locked into position.

Care and Maintenance

To maintain the beautiful chrome finish of your Moen faucet, clean it regularly with a soft, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish and void your warranty. For stubborn water spots, a mild soap and water solution can be used, followed by rinsing and drying.

Troubleshooting

ProblemPossible CauseSolution
Low Water FlowClogged aerator; partially closed shut-off valve; debris in supply lines.Remove and clean aerator; ensure shut-off valves are fully open; flush supply lines.
Leaking from SpoutWorn out cartridge; debris in cartridge.Replace cartridge (refer to Moen's website for replacement parts and instructions); clean cartridge.
Leaking at Base of FaucetImproperly sealed base; loose mounting nuts.Reapply plumber's putty/silicone sealant; tighten mounting nuts.

Specifications

  • Model Number: TS214
  • Brand: Moen
  • Finish: Chrome
  • Material: Metal
  • Number of Handles: 2
  • Handle Type: Lever
  • Mounting Type: Deck Mount
  • Installation Type: Centerset
  • Spout Reach: 8.86 Inches
  • Item Weight: 9.31 Pounds
  • Product Dimensions: 8.88 x 15.88 x 7.69 inches
  • UPC: 026508170267

Warranty and Support

This Moen product is backed by a Limited Lifetime Warranty. For detailed warranty information, product registration, replacement parts, or technical assistance, please visit the official Moen website or contact Moen customer service. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.