Introduction
Thank you for choosing the John Timberland Bellagio Outdoor Wall Light Fixture. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.
This outdoor wall sconce features a texturized black finish, die-cast aluminum construction, and clear hammered glass, designed for exterior use in various outdoor settings such as porches, patios, and entryways. It is rated for wet locations, ensuring durability against full exposure to rain and weather.
Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, and the National Electric Code (NEC).
- Consult a qualified electrician if you are unfamiliar with electrical wiring.
- Wear safety glasses and appropriate protective gear during installation.
- Handle glass components with care to prevent breakage and injury.
- Ensure the fixture is securely mounted to a structurally sound surface.
- Do not exceed the maximum wattage specified for the light bulb.
Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- Outdoor Wall Light Fixture (1)
- Mounting Hardware Kit (1)
- Clear Hammered Glass Shade (1)
- Instruction Manual (1)
Note: Light bulb is not included. This fixture uses one maximum 60-watt standard-medium base (E26) light bulb.
Specifications
| Brand | John Timberland |
| Model Number | 49276 |
| Dimensions (H x W x D) | 16.5" H x 7" W x 9.75" D |
| Weight | 3.21 lbs |
| Material | Die-cast Aluminum, Clear Hammered Glass |
| Finish | Texturized Black |
| Bulb Base | E26 (Standard-Medium) |
| Max Wattage | 60 Watts |
| Voltage | 120 Volts |
| Indoor/Outdoor Usage | Outdoor (Wet Location Rated) |
| UPC | 736101121855 |
Installation Instructions
Before you begin, ensure the power is turned off at the circuit breaker or fuse box.
- Prepare the Mounting Surface: Ensure the electrical junction box is securely installed and accessible.
- Attach Mounting Bracket: Secure the provided mounting bracket to the junction box using the screws supplied with the junction box. Ensure the bracket is level and firm.
- Make Electrical Connections:
- Connect the fixture's black wire to the house's black (hot) wire.
- Connect the fixture's white wire to the house's white (neutral) wire.
- Connect the fixture's ground wire (bare copper or green) to the house's ground wire and to the mounting bracket's ground screw.
- Secure all connections with approved wire connectors.
- Mount the Fixture: Carefully align the fixture's backplate with the mounting screws on the bracket. Push the fixture onto the screws and secure it with the decorative nuts or screws provided.
- Install the Glass Shade: Carefully place the clear hammered glass shade into the fixture. Ensure it is seated correctly and secured according to the fixture's design (e.g., with retaining clips or a threaded ring).
- Install Light Bulb: Screw one E26 base light bulb (maximum 60 watts, not included) into the socket. Do not overtighten.
- Restore Power: Turn the power back on at the circuit breaker or fuse box. Test the light fixture.
Figure 1: Product Dimensions. The fixture measures 16.5 inches high, 7 inches wide, and extends 9.75 inches from the wall. The backplate is 6.75 inches high and 4.75 inches wide.
Figure 2: Installed Fixture. This image shows the John Timberland Bellagio outdoor wall light fixture mounted on an exterior wall, showcasing its design and how it appears when installed.
Operation
The John Timberland Bellagio Outdoor Wall Light Fixture operates via a standard wall switch connected to its electrical circuit. Once installed and powered, simply toggle the wall switch to turn the light on or off.
Maintenance
- Cleaning: To clean the fixture, ensure power is off. Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or glass.
- Bulb Replacement:
- Turn off power to the fixture at the circuit breaker.
- Allow the bulb to cool completely before touching it.
- Carefully remove the glass shade if necessary to access the bulb.
- Unscrew the old bulb and screw in a new E26 base bulb, not exceeding 60 watts.
- Reattach the glass shade securely.
- Restore power and test the light.
- Inspection: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Address any issues promptly.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture Loose wire connections Defective bulb | Check circuit breaker/fuse Verify all wire connections are secure (power off) Replace bulb with a new one |
| Light flickers | Loose bulb Loose wire connections Incompatible dimmer switch (if applicable) | Tighten bulb Check and secure wire connections (power off) Ensure dimmer is compatible with bulb type |
| Glass is broken or cracked | Impact damage | Contact John Timberland customer support for replacement parts. |
Warranty and Support
For warranty information, replacement parts, or technical assistance, please contact John Timberland customer support. Refer to your purchase documentation or the manufacturer's website for current contact details.
John Timberland Brand Logo
